This is Feature Comparison from cisco.com. But I'm not sure can use
this card for my home lab.
http://www.cisco.com/en/US/prod/collateral/routers/ps5855/product_data_sheet0900aecd8028d2db.html
*Table 2.* Cisco MFT VWIC2 Card Feature Comparison
Part Number Ports T1 Support E1 Support Unst
Hi all,
I'm building a voice home lab. I can borrow some routers and Vwic card
from my company.
Can i use VWIC2-2MFT-G703 for voice lab?
Regards,
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
I have 20 voice vouchers for sale! They are good until March. Let me know
if you are insterested.
Thanks,
Dan
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for
You'll be best served by an ISR (28xx/38xx)
any of those you mentioned could be used as the PSTN/WAN router, though
~Joe
Date: Sun, 7 Aug 2011 15:24:31 -0700
From: v.c...@yahoo.com
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Router for My Home LAB
Hi all,
I need
Hi all,
I need to add a router for my home lab and I need your advise about which one I
should choose.
I know that the best one is 2801 but it is very expensive if I need to compare
with other old routers.
what I know, I can use one of the following routers:
3725
2620MX
1760
3640 ( I thin
Remember, please do not feed the trolls. If someone claims to pass and
doesn't present their ccie number, ignore them. It's a clear fishing scam.
Brian
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.co
one last thing ,
can you please remove all the Media assinged to the BR trunk and make
MRGL contain the IOS MTP only ?
thanks
Ash
On Sun, Aug 7, 2011 at 8:54 PM, Ashraf Ayyash wrote:
> Hello Brian ,
>
> Thank you for the detailed explanation , in fact like i said the CCM
> will ask for bandwidth
Hi,
Guys,
I have passed my lab it was hardest lab i feel, first i got lab 4 and now lab 5
(aar rsvp, sip , bacd) my bacd did not worked but after removing and again
reinsert all the commands it started working...
It took me 6.5 hrs to complete the lab, ipcc server was very slow and with 2
pa
Hello Brian ,
Thank you for the detailed explanation , in fact like i said the CCM
will ask for bandwidth for a new call each time it will invoke any
media resource and that's why you have seen this behavior and that's
why it have been solved by increasing the BW ,
now the negotiation of the MTP
Hi All,
Could anybody please advise me if there is any way to achieve BR2 phs
registration on remote rack via HW VPN.
As per below configs.
ip dhcp excluded-address 10.10.202.1 10.10.202.49
ip dhcp excluded-address 10.10.202.70 10.10.202.254
!
ip dhcp pool br21
host 10.10.202.11 255.255.2
You can't ping phone from switch but CDP shows it connected? sounds like
connectivity to switch.
You should be getting this so sounds like there is something wrong with the
phone or link, I would contact support.
HQ-3560#ping 10.10.200.64
Type escape sequence to abort.
Sending 5, 100-byte ICMP E
Hi Ash - A little more insight into the problem. I removed the bandwidth
interzone zone UCM 32 command and successfully completed a call. The first
"show gatekeeper calls" is after the call is completed and I have
bidirectional voice. Once I hit the Hold or Transfer softkey on the UCM
phone, I g
Hi,
Can you share your CME configuration?
Have you tried debuging tftp to see what happens when you are trying to
access the file?
Have you wireshaked the phone to see what happens when you are trying to
access the file?
Thanks,
Julien
2011/8/6 CCIE for Me
> **
> Hi all,
>
> I am having the mo
Hi Ash - Thanks for your reply. I set the DP on my MTP to be the G729 only
region. The config on the gateway is the following (the transcoder in the
output below is used locally for CUBE):
sccp local GigabitEthernet0/0.20
sccp ccm 10.10.200.3 identifier 1 version 5.0.1
sccp ccm 10.10.210.11 iden
Which port is it on and is the port configured to have the correct VLAN
Port 1/0/2 with correct vlan assignment
can you ping the phone from the switch?
Can not ping the phone. but i can reach the VLAN IP 10.10.200.3
Is the uplink port on the switch and the router correctly configured
Yes
d
So how do you know it has IP 10.10.200.69 if there is no comm between 3750
and phone?
If you are using show cdp neighbor detail to get this info then you have
some communications.
Which port is it on and is the port configured to have the correct VLAN
can you ping the phone from the switch?
Is t
Hi All,
Any one has faced issues in connecting to HQ 3750 Phone 1 in Proctor Labs?
I am facing the issue for the third time continuously on two different PODs.
Cross checked the configs & i can not find any differences even after comparing
with the Proctor Guides.
I am really stuck on this & do
hello ,
i don't think its a bug but we can confirm that from the traces ,
in fact what i have found that anytime the CCM tried to allocate any
Media resource it will ask for BW for it as a normal new call based on
what the region configured in it dp and relation with the destination
,
i think th
Looks like the bug associated with the intraregion codec parameter that
should be changed to g729
--
From: "Ashraf Ayyash"
Sent: Sunday, August 07, 2011 3:01 AM
To: "Brian Rudy"
Cc:
Subject: Re: [OSL | CCIE_Voice] Bandwidth Interzone w/ MTP Issu
Hello Brain ,
can you check what DP assigned to your MTP and what codec is being
used in there ?
Thanks
Ash
On Sun, Aug 7, 2011 at 5:50 AM, Brian Rudy wrote:
> Hello -
>
> The call flow I am working on looks like this
> hq-phone(sccp)->gk->cube->cme-phone(sccp). I am working on Vol 2, Lab 1,
>
20 matches
Mail list logo
