in order to see the Users in the CUxAC console you will need to have
Telephone number assign to each user presenting his DN in the ccm DB
double check this pleaseit has been always the reason behind the
issue you are facing
Ash
On Wed, Sep 28, 2011 at 7:55 PM, Gerence Guan wrote:
> Hi Guys,
i am using it , its built in the ios , please have a look to the B-ACD
doc on the cco which give config example about it
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/bacd/configuration/guide/cme40tcl.html
Ash
On Wed, Sep 28, 2011 at 8:23 PM, ccielabrat wrote:
> Can anyone let me know if
Hi,
Don't know how is it going to be on the lab but built-in BACD works fine on
IOS 12.4(20)T and 12.4(22)T in my lab.
--
Regards,
Bartosz
2011/9/29 ccielabrat
> Can anyone let me know if they have been able to use the "Built-In" b-acd
> tcl scripts ?
>
> You can see both app-b-acd and app-b-
Ahoy one and all:
I am a struggling voice aspirant. Got my home lab setup and started IPE
volume I workbook. I have two 3550 switches, one for HQ and the other for
BR1.My pstn phone is connected to the BR1-3550. The pstn configuration is
similar to the IPE pstn config (Vol 1, lab4). I am able to p
Reconnect to Higher order CCM is checked.
Voice mail ports never register with subscriber ; they register with
publisher only. If I shut down publisher ; then from subscriber GUI voice
mail ports vanish (ie nothing listed under search for voice mail ports).
When publisher is up voice mail ports app
If the setup is for a real production enviornment, the dense-mode is not a good
idea.
If the goal is to accommodate requirements for the voice lab, the suggested
setup will work perfectly.
Connected by DROID on Verizon Wireless
-Original message-
From: Bill Lake
To: Ashraf Ayyash
Cc:
Hi Voiper
You need to point your PSTN phone to the PSTN router for TFTP'ing and add more
config to use Call manager express
obtain the CME firmware file for your PSTN router
Get the correct ones as per you router IOS on CCO
You will need to extract the files to flash and then create tftp refe
Thanks Stuart for the prompt response.
My pstn router has only about 16mb free space on the flash. So, I had tried
to simply load the 7960 phone loads, in vain. I will perhaps erase the flash
and copy the CME7.0 tar. I need to read the CME docs.
Regards,
Voiper
On Thu, Sep 29, 2011 at 11:07 AM, G
what option or command do i have to take out inorder to the the q931 cause code
id 8081.. because i set it up and confired all the commands in the workbook and
everything is working fine..i can't generate the cause code 8081..
HQ#
gatkeeper
zone local GK ccievoice.com 142.1.64.254
zone remote BB
Always better to use RSVP. Use locations only if all routers don't support
rsvp. Example if your branch connects to HQ via a layer 3 vpn you can't do
rsvp with ISP managed routers.
Very simple clear hub & spoke topologies (no alternative paths ) only fit
with Locations based CAC.
This forum basic
>From the list below it looks like you specified the Switch L3 interface
(10.10.100.2) as your default gateway and option 150 target instead of the
router address (10.10.100.1)
I would try "debug ephone reg" and "debug dhcp-server" to see what is
happening. Also make sure that your telephony-s
On the PSTN router, did you do "create cnf-files" under telephony service?
- Reply message -
From: "Voiper"
Date: Thu, Sep 29, 2011 8:41 am
Subject: [OSL | CCIE_Voice] Home lab PSTN phone woes
To:
Ahoy one and all:
I am a struggling voice aspirant. Got my home lab setup and started IPE
Sounds like a db sync issue?
On Thu, Sep 29, 2011 at 9:00 AM, Ken Wyan wrote:
> Reconnect to Higher order CCM is checked.
> Voice mail ports never register with subscriber ; they register with
> publisher only. If I shut down publisher ; then from subscriber GUI voice
> mail ports vanish (ie not
what option or command do i have to take out/uncheck inorder to see the q931
cause code id 8081 in the CUCM traces.. because i set it up and confirmed all
the commands in the workbook and everything is working fine..i can't generate
the cause code 8081..Anyone knows how to create the q931 cau
81 mean unallocated unassigned number , you dial the wrong number
check this DOC :
http://www.cisco.com/en/US/tech/tk801/tk379/technologies_tech_note09186a008012e95f.shtml
Thanks
Ash
On Thu, Sep 29, 2011 at 8:37 AM, Ray wrote:
> what option or command do i have to take out inorder to the the
i dont fully understand what you are looking for ,
on the ccm traces you will find Cause = and
its Q931 in there few line above the release complete message ,
and to know what is the cause you need to use the DOC i have sent to
you , which will explain and show you what does it mean ,
if you hav
i have recreate it in my lab to be accurate , in my config i made the
incoming dialpeer with G711 and i am sending G729 call :
loneCluster>
09/29/2011 22:32:58.497 CCM|value H323-UserInformation ::=
|
09/29/2011 22:32:58.498 CCM|{
h323-uu-pdu
{
h323-message-body releaseComplete :
{
Thanks Ashraf.
Already checked that. The telephone number for new users have been setup
properly. I also checked the directory rules on the CUBAC server, all look good.
Logged a TAC case, be advised to restart the CTI manager and AXL service for a
try.
will update here later.
Gerence
On 29/
Also, make sure you are not over your user limit. Every version except
enterprise has strict user limits.
Sent from my iPhone
On Sep 29, 2011, at 3:25 PM, Cisco Guan wrote:
> Thanks Ashraf.
>
> Already checked that. The telephone number for new users have been setup
> properly. I also check
19 matches
Mail list logo