Hi folks,
i configured the transcoder and conference resources on the CME, but couldn't
make them to work. When i want to conference the line, it says cannot complete
the conference.
here is my config: Did i miss any configuration part in this below config
sccp local FastEthernet0/0
Try adding g711alaw under conferencing
Sent from my iPhone
On Jun 4, 2012, at 3:02 PM, Krishna vinayak_...@yahoo.com wrote:
Hi folks,
i configured the transcoder and conference resources on the CME, but couldn't
make them to work. When i want to conference the line, it says cannot
Can you send a copy of the CME config?
Also, are the DN's Octo lines?
-Chase
--
If winners never quit and quitters never win, then who coined the phrase, Quit
while you’re still ahead.?
Thanks for the help DQ. MTP device pool was the issue. I thought I had checked
everything twice. . . .details are key!
On Jun 3, 2012, at 10:25 AM, Dan Quinlan (daquinla) wrote:
Make sure both MTPs are in the correct device pools / regions on UCM. If
your site A MTP and site C MTP are
You need an ephone-dn for conferencing - it does not need to be a dialable
number. Add something like:
ephone-dn 10 octo
number a01
Conference ad-hoc
Also, under telephony-service do conference hardware
DQ
d...@cisco.com
Sent from my iPhone
On Jun 4, 2012, at 3:52 PM, Krishna
--
An HTML attachment was scrubbed...
URL: /archives/ccie_voice/attachments/20120604/c49d1caf/attachment-0001.html
--
Message: 2
Date: Mon, 4 Jun 2012 15:55:52 -0400
From: Jeff Mchugh jeff.mch...@att.net
To: Krishna vinayak_...@yahoo.com
Cc: ccie_voice
