looking at it over I think it was i did not include:
voice service voip
allow-connections h323 to sip
etc
etc
etc
Cheers,
Randall
From: Vik Malhi
To: Randall Crumm
Cc: Online Study
Sent: Saturday, June 9, 2012 8:42 PM
Subject: Re: [OSL | CCIE_Voice] 5 new
utils service restart Cisco Tftp
Thanks,
Rohith
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
Hi,
Only the following services are possible for reset from CLI:
System SSH
Cluster Manager
Service Manager
Cisco Tomcat
Cisco Database Layer Monitor
Cisco CallManager Serviceability
from "Command Line Interface Reference Guide for Cisco Unified
Communications Solutions Release
What is the status of the voice ports on both ends of the call, are any of
them hung up?
On Sun, Jun 10, 2012 at 6:34 PM, chase mergenthal wrote:
> Any one know why I would be getting this? I already tried changing the
> bchan selection order and get the same results...
>
> Jun 11 03:32:14.531:
At 1st look, you don't have a network side on the PRI - both sides are at user.
Think you need an isdn protocol-emulate network on the PSTN controller config.
DQ
d...@cisco.com
Sent from my iPhone
On Jun 10, 2012, at 9:52 PM, "chase mergenthal" wrote:
> Any one know why I would be getting th
For some magical reason, this started working on its own...
:-/
-Chase
--
If winners never quit and quitters never win, then who coined the phrase, "Quit
while you’re still ahead."?
From:
Hi folks,
I configured the below LLQ-CBWFQ on the HQ and BR1, and when i made the test
calls i.e. two calls made from br1 -hq, the calls went through. But in the
configuration the rtp allowed for only one g729 call, so will the class
class-default taking this traffic??? Any help in giving clari
I did try that and still showing not active.
Date: Mon, 11 Jun 2012 00:38:59 +0100
From: prince_karim...@yahoo.com
Subject: Re: [OSL | CCIE_Voice] callback
To: jrpetra...@msn.com; ccie_voice@onlinestudylist.com
Ensure that the service parameter "Call back enabled Flag" is set to true. Then
rest
plz ignore my last query,... when i implemented the command frame-relay traffic
shapping on the physical interface, it showed the output
From: Krishna
To: "ccie_voice@onlinestudylist.com"
Sent: Sunday, June 10, 2012 6:45 PM
Subject: Re: no output on interface
hi folks,
here is my cbwfq config. After i applied it on the interface dlci it shows
nothing in the show policy-map interface.. why this is happening?? your help is
much appreciated.
BR2-RTR#sh run | s class-map|policy-map|map-class
class-map match-any VOIP-CONTROL
match protocol skinny
match
Cisco TFTP., how do I restart it from CLI ?
Utils service list
Cisco Syslog Agent[STARTED]
Cisco TAPS Service[STARTED]
Cisco Tftp[STARTED]
Cisco Tomcat[STARTED]
Primary Node =true
admin:utils service Cisco TFTP restart
Executed command unsuccessfully
No valid command entered
admin:utils servic
Ensure that the service parameter "Call back enabled Flag" is set to true. Then
restart CCM service.
From: Joel Petralia
To: ccie_voice@onlinestudylist.com
Sent: Sunday, 10 June 2012, 23:13
Subject: [OSL | CCIE_Voice] callback
I am trying to get the call
Any one know why I would be getting this? I already tried changing the bchan
selection order and get the same results...
Jun 11 03:32:14.531: ISDN Se0/0/0:23 Q931: Applying typeplan for sw-type 0xD is
0x0 0x0, Calling num +14087775002
Jun 11 03:32:14.535: ISDN Se0/0/0:23 Q931: Applying typeplan
I am trying to get the callback feature working but the phones keep displaying
Callback in not active. Any help would be greatly appreciated.
Thank you,
Joel
___
For more information regarding industry leading
Whew, that is great news, thanks Vik. I hope to be finished on August 27, 2012.
Sent from an awesome iPad!
On Jun 10, 2012, at 3:23 PM, Vik Malhi wrote:
> The message from CIsco Live is
>
> Dont expect an announcement any time soon re: the blueprint change for
> CCIE-V. My interpretation
Lol Vik
You are the Man!!!
Randall
Sent from my iPhone
On Jun 10, 2012, at 12:12 PM, Vik Malhi wrote:
> Yes I can confirm I am alive and well and am at IPX. I was worried there for
> a while that you guys on the list had heard something so it is a relief to
> hear Wayne say that:-)
>
>
>
The message from CIsco Live is
Dont expect an announcement any time soon re: the blueprint change for CCIE-V.
My interpretation is this means you have the rest of this year and fairly deep
into 2013 before a blueprint change.
Understandably not much information is being given but I will sh
Yes I can confirm I am alive and well and am at IPX. I was worried there for a
while that you guys on the list had heard something so it is a relief to hear
Wayne say that:-)
--
Vik Malhi – CCIE #13890
Managing Partner / Instructor - IPexpert, Inc.
Mailto: vma...@ipexpert.com
Telephone: +1.81
Calling name appears only after called party answers the call.
You have to manually configure calling-name for DN under RDP
From: Joe Albert
To: ccie_voice@onlinestudylist.com
Sent: Sunday, June 10, 2012 7:37 PM
Subject: [OSL | CCIE_Voice] MVA Issue
Dea
Sorry, I got this mixed up. MVA does not support Calling name, even if you go
off hook.
From: A NN
To: Joe Albert ; "ccie_voice@onlinestudylist.com"
Sent: Sunday, 10 June 2012, 17:21
Subject: Re: [OSL | CCIE_Voice] MVA Issue
Calling Name won't show up if
Calling Name won't show up if the phone is ringing, you have to go off hook to
see the CN.
HTH
From: Joe Albert
To: ccie_voice@onlinestudylist.com
Sent: Sunday, 10 June 2012, 15:07
Subject: [OSL | CCIE_Voice] MVA Issue
Dear All,
I have an MVA Is
Dear ALL,
I have tried to load different labs with the same result. I am getting the
PSTN and HQs phones registered, but they
don't have any dial tone. The BR1 PH1 works fine. I have loaded different
labs and still the phones are not getting any dial tone.
Any help would be appreicated.
Rob
__
Dear All,
I have an MVA Issue:
I configure as per the srnd.
1. I added the dial peer in the h323.
2. I define the service url in the h323 gw
3. The service parameters are configured on the cucm (MVA=on, & the number is
defined).
4. The MVA access number is defined under media re
I havent used 7960 so cant comment on icon.
Sip phones off hook status will be known to cme only when the invite comes in
to cme which would be after a digit press (if using kpml) or a pattern match (
if using vr dialplan)
-Pavan
On Jun 9, 2012, at 10:55 PM, Krishna wrote:
> hi folks,
24 matches
Mail list logo
