hi folks,
i have site c which is an mgcp gateway, and during srst it has to support bacd
for call queuing mechanism... and therefore i invoked the hunt pilot on the
incoming pots dial-peer... the call came through the pots dial peer, and the
welcome greeting is played back after which the hunt
B-ACD can only be invoked on an incoming dial peer. So during SRST, the
pots dial-peer will work fine for PSTN callers trying to hit service aa,
but your e-phones at Site C won't be able to utilize it. The e-phones will
need to leave the router and come back in order to hit service aa. You'll
have
You don't need the voiceview authentication url in a cucm integration. Use
the login Url in the service, and make sure the cue jtapi user has control
of the user phone.
On 12 Aug 2012 03:31, ccielabrat ccielab...@gmail.com wrote:
Hi group,
I have my CUE configured with CUCM.
I can call into
Did you enable music on hold in telephony-service? Bacd requires moh.
On 12 Aug 2012 05:01, Krishna vinayak_...@yahoo.com wrote:
hi folks,
i ran into a new issue with the bacd.. but with your help i could able to
get the welcome prompt and i understand the bacd structure... here is my
Dear All,
I have a problem with initializing the CUE.
I am working on proctorslab and I have followed all the steps correct. From
Factory reset to to Initial Setup, CUCM CTI RP and CUE ports were created too.
Now , When I access the CUE from Web , I put my Userid Pwd then it doesnt
login and
Hello,
Here is the error on the CUPS server from the CUCM Publisher page.
Sync Completed, but currently failed to connect to the CUCM Database Monitor.
Retrying... 2012-08-12 13:37:17
I reset the AXL username and pw. It connects wit the credentials.
It seems like the hostname is not correct.
On CUPS, run the command show tech network hosts from the CLI. Does CUPS
have the correct hostname for CUCM?
--Jeff
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Randall Crumm
Sent: Sunday, August 12, 2012 10:10 AM
To: Online
Yes
Sent from my iPhone
On Aug 12, 2012, at 11:21 AM, Jeff S jes20...@gmail.com wrote:
On CUPS, run the command “show tech network hosts” from the CLI. Does CUPS
have the correct hostname for CUCM?
--Jeff
From: ccie_voice-boun...@onlinestudylist.com
Did you reset the trunk? That ussually works for me.
On Sun, Aug 12, 2012 at 2:29 PM, Rrcrumm rrcr...@yahoo.com wrote:
Yes
Sent from my iPhone
On Aug 12, 2012, at 11:21 AM, Jeff S jes20...@gmail.com wrote:
On CUPS, run the command “show tech network hosts” from the CLI. Does
CUPS have
Thats what I did and it worked.
Thought I reset it when I created it.
Cheers,
Randall
From: Edgar Feliz ejzi...@gmail.com
To: Rrcrumm rrcr...@yahoo.com
Cc: Jeff S jes20...@gmail.com; Online Study ccie_voice@onlinestudylist.com
Sent: Sunday, August 12,
I set up cue at SC it works from SB and SC , but when I call from SA I get a
fast busy after 10 seconds, which is the fwd noan setting.
Any thoughts?
Cheers,
Randall
___
For more information regarding industry leading CCIE Lab training, please
The difference I can see between the sights is RSVP CAC between SA and SC. The
is no CAC between SB and SC.
Probably not the issue, but I am not sure while I am scratching my head.
Cheers,
Randall
From: Randall Crumm rrcr...@yahoo.com
To: Online Study
If you configured MTP with g729r8, don't forget to add this codec in the
XCD, since it is not the default.
Or change the MTP to g729ar8.
On Sun, Aug 12, 2012 at 6:54 PM, Randall Crumm rrcr...@yahoo.com wrote:
The difference I can see between the sights is RSVP CAC between SA and SC.
The is
Can you directly dial the CUE from Site A phones?
DQ
d...@cisco.commailto:d...@cisco.com
Sent from my iPhone
On Aug 12, 2012, at 6:02 PM, Randall Crumm
rrcr...@yahoo.commailto:rrcr...@yahoo.com wrote:
The difference I can see between the sights is RSVP CAC between SA and SC. The
is no CAC
Good call. I did add g729r8 in the MTP and not in the transcoder.
5 points!
Cheers,
Randall
From: Bruno Nonogaki brun...@gmail.com
To: Randall Crumm rrcr...@yahoo.com
Cc: Online Study ccie_voice@onlinestudylist.com
Sent: Sunday, August 12, 2012 5:13 PM
Sometimes takes a couple of resets.
Edgar
On Sun, Aug 12, 2012 at 4:48 PM, Randall Crumm rrcr...@yahoo.com wrote:
Thats what I did and it worked.
Thought I reset it when I created it.
Cheers,
Randall
--
*From:* Edgar Feliz ejzi...@gmail.com
*To:*
OK here is the setup, SiteB is registered as a H323 GW to CUCM (5 Lab
workbook-Lab3)
Originally all calls worked, inbound from PSTN and Outbound
Then I did SRST-CME and hit the bug
OK so tried to do the fix and I can't seem to get it to work.
So I am asking for help to figure it out as I had
Hi folks,
this query is about CUPC clients CUP server... I enable one of the site phone
as softphone and the other one as desk phone mode... everything works fine
including voicemails... but the problem is in order to send the message to
other client
18 matches
Mail list logo
