Hello,
I am copying the support team. They will clarify this issue for us.
Regards,Mohamed Gazzaz
From: ahmad_tam...@hotmail.com
Date: Wed, 17 Apr 2013 08:45:21 +0300
To: ejzi...@gmail.com
CC: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Back to back session IPexperts racks
Is t
Is there any specific email for the support ?
Sent from my iPhone
On Apr 16, 2013, at 2:49 PM, "Edgar Feliz" wrote:
> I've done it many times just ask them to "join" your sessions, the support
> team has always been great about doing it when you give them enough time and
> if racks are availa
There are other tasks for you to accomplish in the IOS devices before you
can actually register the phones. So, for me, it sounds better if you start
with the IOS devices, and then move to the Web GUI.
This is my opinion, however.
On Wed, Apr 17, 2013 at 3:35 AM, CCIEing wrote:
> Dear All,
>
After starting session we may need to extend the session, in that case we
need to give them few hours , oherwise it won't work
On Tue, Apr 16, 2013 at 7:44 PM, Edgar Feliz wrote:
> I've done it many times just ask them to "join" your sessions, the support
> team has always been great about doin
Hi Vik,
Can you please suggest about alternate solutions because current solution
break voicemail service on the phone.
Thanks & Regards,
Ramcharan Arya
On Tue, Apr 16, 2013 at 12:10 PM, Ramcharan Arya
wrote:
> Thanks Bill I will check archive for this discussion.
>
>
> On Tue, Apr 16, 2013
To expand further
You should be able to manipulate any router in you control (not pstn) to be or
get NTP from any choice you want.
Be that the PSTN, another backbone IP or a router in your control
A helpful command is to and burst iburst to the end of your NTP server command.
Look it up to see
Hi Amit,
Can you paste some configs, please? It's always a good idea to paste
configs and or debug output when asking a question to the group.
At a high level, the PSTN router should be your NTP master (NTP master
[IP]) and your BR1 and BR2 should point to it with the following, NTP
server [IP of
Also, to echo Bills point number 2, make sure the "encapsulation dotq1 xx
native" command is configured on the router. That burned me twice early on.
Josh
On Monday, April 15, 2013, William Bell wrote:
> I'd check:
>
> 1. DHCP snooping on the switch (sh ip dhcp snoop)
>
> 2. Dot1q trunk on HQ-RTR
Dear All,
In the devise base strategy which is better to start with the CUCM and the
applications or to start with the Router devices ??
I believe to start with CUCM is better that allow the phones to register
earlier, as all your testing then will depend on it.
Appreciate your feedback and adv
2. create a sip trunk between HQ to service provider. there should be both
way audio. to test the trunk call 0113225251234. service provider may
expect + followed by 32 and the remaining numbers
Collect trace for
TCP is used as signalling pool
let me know if anyone want to work together.
tx
__
Hi,
Bill you are right.
===
On default settings after auto qos we have
mls qos srr-queue output dscp-map queue 1 threshold 3 40 41 42 43 44 45 46
47 <<< it's different setting than documentation says
C3560#sh mls qos maps dscp-output-q
Dscp-ou
i configure PSTN router ip as ntp server in BR2 router but still not
showing fixed
it is not showing synchronized...
how can fixed it?
--
Thanks & Regard's
Amit Sharma
___
For more information regarding industry leading CCIE Lab training, please
This is lab 4 question ... but there is now lab 8 work on it
I am really upsad of it
On Tue, Apr 16, 2013 at 9:11 PM, sanity insanity <
networksanitytoinsan...@gmail.com> wrote:
> hi Guys,
>
> Have not heard back on this...
>
>
> On Thu, Apr 11, 2013 at 9:29 PM, sanity insanity <
> networks
Thanks Bill I will check archive for this discussion.
On Tue, Apr 16, 2013 at 12:00 PM, Bill Lake wrote:
> Look for a detailed discussion on this very issue around November 19th 2012
>
>
>
> Sent from my iPhone
>
> On Apr 16, 2013, at 11:25 AM, Ramcharan Arya
> wrote:
>
> Hi Bill
>
> I breaks
Look for a detailed discussion on this very issue around November 19th 2012
Sent from my iPhone
On Apr 16, 2013, at 11:25 AM, Ramcharan Arya wrote:
> Hi Bill
>
> I breaks voicemail service on that phone. So what is the alternative
> solutions for this task.?
>
> Thanks,
> Ramcharan Arya
>
Hi Bill
I breaks voicemail service on that phone. So what is the alternative
solutions for this task.?
Thanks,
Ramcharan Arya
CCIE # 28926 (R&S)
On Tue, Apr 16, 2013 at 11:22 AM, William Bell wrote:
> Correct. If you convert a phone to using External URLs only then you will
> be breaking Mes
Correct. If you convert a phone to using External URLs only then you will be
breaking Messages button. You can apply a URL to the messages button but it
doesn't restore the behavior you are looking for because the VM services URL
that I have seen used/reference is a XML phone menu object. Which
In regards to Q1, you are accurate in that:
- When the GW fails over to the backup call agent, it will send a RSIP (not
shown in your trace, perhaps not pertinent to your question)
- The call agent will send AUEP messages to the MGCP GW for each endpoint
- The MGCP GW responds to AUEP with a 2
Hi,
When I use proposed solutions according to solution guide for disabling
directory service it works but voicemail service also stop working on the
same phone.
Can someone please test this and let me know if anyone had similar problem.
Thanks & Regards,
Ramcharan Arya
CCIE # 28926 (R&S)
__
hi Guys,
Have not heard back on this...
On Thu, Apr 11, 2013 at 9:29 PM, sanity insanity <
networksanitytoinsan...@gmail.com> wrote:
> Hi Guys,
>
>
> I have a MGCP gateway setup when subscriber fail publisher will work
> Call 911 while the call is active shut down the cucm sub services. Make
>
Hi All
Just passed my CCIE Voice and want to sell my lab at the price 3,800 AUD -
save 1,500 dollars or more if buying from ebay.
Also including software and STUDY MATERIAL to PASS the lab for free.
Please check the list of the equipment below. It is enough to simulate the
real V3 voice lab topo
Dominik,
You can absolutely verify the the queue and threshold assignment using the
command: show mls qos dscp-output-q.
-Bill
--
William Bell, CCIE #38914
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Apr 16, 2013, at 3:51 AM, Dominik Łoniewski wrote:
> Thanks William,
>
> Yes. C
I've done it many times just ask them to "join" your sessions, the support
team has always been great about doing it when you give them enough time
and if racks are available
Edgar
On Tue, Apr 16, 2013 at 6:58 AM, Bill wrote:
> You need to verify as in the past this did not always work. Not s
Hi Bill,
You are correct but that was in the past. Before the new scheduling system, I
used to ask support to link my B2B sessions. Now the sessions are automatically
linked. I scheduled a B2B session last week and I didn't have to ask support.
CC: aboaz...@gmail.com; ccie_voice@onlinestudylist
You need to verify as in the past this did not always work. Not sure how the
new scheduling works
Sent from my iPad
On Apr 15, 2013, at 10:27 PM, Mohamed Gazzaz wrote:
> The two sessions are linked automatically when you book B2B sessions and your
> configuration stays.
>
> You can ask supp
Hello Friends,
Got new lab 8 in RTP
There was lot of things changed
CUCM feature
Unity back
IPCC
CUCM SIP TRUNK with Early offer
I don't want any comments from any guy about no lab 8 and all because i saw
that from my eyes so cannot deny the fact now...
Whoever interested please add me on skyp
Hi,
is this CME-SRST or SRST
if CME-SRST, check your ephone mac and type and button-dn assignment
thanks,
On Sun, Apr 14, 2013 at 8:16 PM, Ahmad Taamneh wrote:
> No, both of them are sccp!
>
> Sent from my iPhone
>
> On Apr 14, 2013, at 8:00 PM, "Michael Heimann" wrote:
>
> Hi,
>
> Just a gu
Thanks William,
Yes. Cisco documentation says that "by default" DSCP 46 is in Q1T1.
But when you look at the mls configuration (after auto qos done on some
interface) it shows that DSCP 46 is in Q1T3 :(
Then, when you try to move DSCP 46 from Q1T3 -> Q1T1 I can't verify it is
really in T1.
Domin
28 matches
Mail list logo
