That is an awesome post.
I learn something new every day
___
Brian Van Benschoten - CCIE # 5421
Managing Consultant - Unified Communications
Core BTS - North Central Region
3001 West Beltline Highway
Madison, WI 53713 USA
(P) +1 (608) 661-7780
(F) +1 (608)
Hi,
I am working on IPX Vol1 Lab 5C Task 5.8, I am not able to get the calls
working. When I checked the output of debug gatekeeper main 10, I could see
the following logs on the PSTN router (Remote Gatekeeper).
PSTNRouter#
Apr 27 09:55:21.071: ////GK/gk_rassrv_lrq:
dear guys,
I am working on vol-1, lab-4 and 5...
which one would be PSTN phone..?
how can i select PSTN phone for calling internal phones?
--
Thanks Regard's
Amit Sharma
___
For more information regarding industry leading CCIE Lab training, please
Hello All,
I am working on WB1 lab 5.6. I have a 91900 RP that is blocked and
annunciator set to precedence level exceeded
Problem is when I call 919004522138 from br1 ph 2 (SCCP) I can hear
the annunciatot after I dial the 5th digit, but when I call it from hq
ph 2 (SIP) my call gets dropped
Hi Ryan,
This is because SCCP phones process dialed numbers in real time digit by digit
as you dial whereas Type-A SIP phones send digits when you press # or Dial
softkey. There are 2 methods to simulate SIP phones; either using phone models
that support KPML or configure SIP dial plans on
ph2)
I am using all hardware phones (7965)
Any thoughts? Thanks for your help
Ryan
-- next part --
An HTML attachment was scrubbed...
URL:
/archives/ccie_voice/attachments/20130427/78233f83/attachment-0001.html
That is not accurate. The 7965 is a Type-B phone:
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucm/srnd/8x/dialplan.html#wp1135386
Type-B phones support KPML:
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucm/srnd/8x/dialplan.html#wp1043976
-Bill
--
William Bell, CCIE
HI experts,
When Branch-2 MGCP router is in CME SRST mode ,i am unable to see Alerting
message on inbound call from PSTN,moreover when i call from PSTN my call
is directly connected and there is no ring back tone ,Can any one help to
fix the issue.
ISDN Se0/0/0:15 Q931: RX - SETUP pd = 8
Bill is right, the 7965 phone is not the issue, it is the annunciator only
works with SCCP phones.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/media.html#wp1046552
Annunciator
An annunciator is a software function of the Cisco IP Voice Media Streaming
Application that provides the
Again not really sure what the dialing methods have to do with this. He is
indicating that both are being routed by the blocked pattern but one (SCCP)
plays the annunciation while the other (SIP) does not. So this seems to
clearly be the exact reference sent that Annunciator requires SCCP to
Hi,
I have configure ringback as per solutions guide when agent phone is
ringing caller hear tone of hold. I am using music on hold audio source 2
ringback2.wav file
ringback file is upload in PUB and SUB. IP voice streaming media app
service restarted
Network on hold is set as per solutions
Thanks for the good information. I think that answers it. I would just
make a note to everyone that on volume 1 Lab 5C section 5.6, the
verification states that a call from HQ Phone 2 which is SIP should work.
According to the documentation in this thread it should not. Thanks
again.
On Sat,
Dear Experts,
The current version of CUE is 2.1.3 something like that and I was trying to
install CUE 7.0.3
However , I have downloaded all the package from CCO.
I have used the following document
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel3_0/installation/guide/upg3boot.pdf
for
13 matches
Mail list logo
