I'm running c2800nm-adventerprisek9_ivs-mz.124-24.T8.bin on BR1 and also
tried it on HQ with c3825-adventerprisek9_ivs-mz.124-24.T8.bin. I have the
same issue with regular 911 calls as well. I can get it to work by padding
more 9's though. So the translations that work look like:
voice translat
I just took lab 8 last week and when I did a show flash on site C gwy I did not
see the tcl files, I've heard were supposed to pull them from the pstn gwy?
Can someone confirm?
Regards,
Hugo
On May 19, 2013, at 7:14 AM, "sanity insanity"
mailto:networksanitytoinsan...@gmail.com>>
wrote:
hi A
"flash0:c2900-universalk9-mz.SPA.152-4.M1.bin" here
On Sun, May 19, 2013 at 6:20 PM, Bill wrote:
> What ios are you guys running?
>
> I don't see this happening in ios
>
> I am running "flash:c2800nm-adventerprisek9_ivs_li-mz.124-20.T.bin"
>
>
> Sent from my iPad
>
> On May 19, 2013, at 12:5
Hi
i am using a route pattern 0.00! ; It was checked provide outside dial tone..
this was working fine...
but I unchecked provide outside dial tone still it is working...not
affected.is it possible or am i wrong somewhere ?
___
For more information regar
What ios are you guys running?
I don't see this happening in ios
I am running "flash:c2800nm-adventerprisek9_ivs_li-mz.124-20.T.bin"
Sent from my iPad
On May 19, 2013, at 12:54 PM, Martin Sloan wrote:
> Bruno, thanks for giving it a try. I feel a little better about my sanity
> now :-)
Bruno, thanks for giving it a try. I feel a little better about my sanity
now :-) It is very strange and I also had the same results as you, with
only the '9' exhibiting this behavior in the replace string. I was hoping
to use translation rules for all my dial-peer digit manipulation but with
th
That´s a good one!
I've tried it out here and indeed does behaviour like that.. and I still
can't figure out what on earth is happening that the Outpulsed digits are
just "11"
If you replace with "/9911/", it sends only "1" !!
It seems something is wrong with the "9's", because if you try to rep
If I change the translation to this:
voice translation-rule 8
rule 1 /^9911$/ /99911/ type any unknown plan any isdn
rule 2 /^1...$/ /617394\0/ type any subscriber plan any isdn
It sends '911' to the PSTN! The voice translation debug looks like this:
*May 19 14:39:44.716: //-1/C76CA681803C/RX
Thanks, Bill. Any thoughts on why the gw is only sending '11' to the PSTN?
If the dial-peer is stripping explicitly matched digits it should strip
all of the digits. It just doesn't make any sense to me that the voice
translation debug and test shows that the digit manipulation happens
correctly
Here's the config from another dial-peer that's working without digit
manipulation on the dial-peer itself. I guess my question is why would I
need to perform digit manipulation directly on the dial-peer for 9911 and
not for the LD dial-peer below?
dial-peer voice 10 pots
translation-profile out
voice translation-rule 8
rule 1 // // type any unknown plan any isdn
rule 2 /^1...$/ /617394\0/ type any subscriber plan any isdn
Sent from my iPad
On May 19, 2013, at 9:07 AM, Ravindra Lakpriya wrote:
> In the dial peer configure no digit strip. :)
>
> On Sun, May 19, 2013 at 5:47 PM, Martin
dial-peer voice 9911 pots
translation-profile outgoing 9911
destination-pattern 9911$
port 0/0/0:23
forward-digits 3
Sent from my iPad
On May 19, 2013, at 9:07 AM, Ravindra Lakpriya wrote:
> dial-peer voice 9911 pots
> translation-profile outgoing 9911
> destination-pattern 9911$
> port
hi All,
I have 2 questions here...
1) If UCCX was supposed to use g729 codec . Then if we are using
unity connection or uccx to record prompts it would record this prompts
in g711ulaw. Therefore the prompts played from the script will be in
g711ulaw when the uccx is setup for g729 .What is the
Thank you for the help. I can get it to work with a no strip or forward
digits all but from a logical standpoint, the config should work, right? I
have all my other dial-peers and translations working for local, ld and
intl calls without digit manipulation on the dial-peer directly, but this
part
In the dial peer configure no digit strip. :)
On Sun, May 19, 2013 at 5:47 PM, Martin Sloan wrote:
> I have a voice translation rule in place for '9911' calls on BR1 during
> SRST. I'm running into some odd behavior (from my perspective) and I'm
> hoping it's a config issue I'm just not spotting.
hi All,
Are we therefore supposed to use to Embedded BACD script or the tcl scripts
will be available to us in flash?
-MJ
On Sun, May 19, 2013 at 7:38 AM, Anirudh Mavilakandy <
anirudh.moha...@gmail.com> wrote:
> You can copy the script available on CCO and modify it according to the
> require
I have a voice translation rule in place for '9911' calls on BR1 during
SRST. I'm running into some odd behavior (from my perspective) and I'm
hoping it's a config issue I'm just not spotting. I have the translation
profile applied to the dial peer and the only other translation that would
be in t
Dear Experts,
I have configured h323 gateway and enabled outbound fast start.
It gives me fast busy signal when I enable it.
However , I have tried to configure on SiteB router Hardware and Software
MTP as well as Hardware Transcoder associated to an MRG then to MRGL then
to the DP and still didn'
> 1. HELP with UCCXDv3 (Alex Mendoza)
> 2. Cisco evils erase configurations needs magicianto explain
> how? (Hesham Abdelkereem)
> 3. Re: BACD DOUBTS... (sanity insanity)
> 4. Unity connections - Unassigned Numbers question (singh)
> 5. Re: BACD DOUBTS... (Anirudh Mavilakandy)
6.
19 matches
Mail list logo
