if i get a question to configure my phones on CME and my phones are in
different protocol than requested on the question, what is the fastest way
to convert the phone? what is the fast way to configure, if the phone will
spend more time to do the process doesn't matter.
actualy, i'm registering th
Hi Guys,
Working on lab 3A .I am not able to register my soft phone on BR2 router
but can register IP expert hardphone.
Main problem lies that i can not ping CME TFTP IP address from PC that is
loopback address on CME.
Here is output of tracert:
Tracing route to 10.10.110.3 over a maximum of 30
Yes for policy based shaping , you use the solution given by our friend. Mine
is for GTS.
From: somp...@gmail.com
Date: Sun, 18 Aug 2013 18:44:20 +1000
To: wilson.sam...@bt.com
CC: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Frame-Relay Sh policy-map interface
You need to pu
Hi Wilson,
You need to add the command under the main serial interface and then you will
see some output:
frame-relay traffic-shaping
Hope that helps.
Regards.
Khaled
From: wilson.sam...@bt.com
To: ccie_voice@onlinestudylist.com
Date: Sun, 18 Aug 2013 08:09:51 +0100
Subject: [OSL | CCIE_Vo
You need to put in extra layer of policy-map for this.
class-map match-any RTP
match protocol rtp
class-map match-any SIG
match protocol skinny
match protocol sip
match protocol h323
match protocol custom-01
!
policy-map LLQ
class SIG
bandwidth 19
Hi All,
For some reason I am not able to configure the Frame Policy-map applied via the
map-class command:
CorpHQ#sh policy
CorpHQ#sh policy-map inter
CorpHQ#
I have checked everything and nothing seem to be wrong.
Is there any special / hidden command that I shall need to invoke, in order to