Of course I meant on the incoming digits on the ccm trunck
- Original Message -
From: Josmar Ramirez
To: 'edot...@ams.net' ; 'pav.c...@gmail.com'
; 'ccie_voice-boun...@onlinestudylist.com'
; 'dcrayto...@comcast.net'
Cc: 'ccie_voice@onlines
On the callmanager make sure you set the significant digits to 4 so that it
strips the 1# when it hits the trunk on ccm. Careful this might break any teho
config that you might be sending to ccm.
- Original Message -
From: ccie_voice-boun...@onlinestudylist.com
To: Pavan ; ccie_voice-
Yes it does.. if you are using VMWare images and re-ip the virtual CCM guest
machines and update the servers IP addresses via the CCMAdmin Page- this "node
ID" can get skewed... you will have to go in to the SQL tables via SQL
Enterprise manager and change them back.
_
Check the CSS on the voicemail ports.. probably can't dial out to the
PSTN number due to CSS restrictions.
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of john D
Sent: Tuesday, May 26, 2009 1:38 PM
To: ccie_voice@onlinestudylist.co
Rtp-nte means you are sending the DMTF signaling inband with the rtp...
add a low bandwidth codec i.e. G729 and then cRTP on top and your DTMF
relay can become - sort of speak lost.. which is why you want to send
the DTMF out of band..
hth
From: ccie_voice-boun...@onlinestudylist.com
[mailt
Bottom line (in my opion).. I you want to communicate with CISCO CCM
Clusters (including legacy CCM 3.x) and NON-CISCO H.323 endpoints use
the h.225 trunk.. When connecting CISCO to CISCO CCM Clusters use the
"Intercluster Trunk (Gatekeeper Controlled Trunk)"
http://www.cisco.com/en/US/docs/vo
Just grabbed one mysefl.. man I've been looking for a while.. There are alot of
seats opened actually (interesting)... hurry while they are still available.
From: ccie_voice-boun...@onlinestudylist.com on behalf of Cliff McGlamry
Sent: Thu 4/16/2009 10:15 PM
To
Reset the phone.
From: ccie_voice-boun...@onlinestudylist.com on behalf of jeremy co
Sent: Thu 4/16/2009 7:48 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] CME call blocking question
Hi,
I want to override after-houre pattern by entering P
Also if you create an new ephone-dn and forget your "no-reg" command and
add it after the fact.. the only way to clear is by reloading the
router. If you do a "show gateway" you will notice the E.164 numbers
listed even after you executed the "no-reg" command. The only way that
I'm able to fix this
service aa2 flash:app-b-acd-aa-2.1.0.0.tcl
param voice-mail 3600
paramspace english index 1
param max-time-call-retry 700
param aa-pilot 3501
param number-of-hunt-grps 2 <-- when using drop through option you must
set the number of hunt groups to 1,
Don't forget to reload
10 matches
Mail list logo
