Jeff,
Thanks for the Training extra's.
Question how do I open this up in Vista or windows 7?
Respectfully Charles George
From: jknuc...@nationwidelab.com
To: jonv...@gmail.com
Date: Wed, 20 Jan 2010 13:49:04 -0500
CC: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice]
http://www.cisco.com/en/US/products/sw/secursw/ps1018/products_configuration_example09186a0080a0eac7.shtml
Respectfully Charles George
Date: Mon, 31 Aug 2009 19:57:04 +0100
From: m...@pobox.net.uk
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Slightly off topic - sorry
Hi
http://www.cisco.com/en/US/products/sw/secursw/ps1018/products_tech_note09186a00808bc994.shtml
Respectfully Charles George
Date: Mon, 31 Aug 2009 19:57:04 +0100
From: m...@pobox.net.uk
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Slightly off topic - sorry
Hi Guys
This
i beleive it is the other way around. The local group would be the 2nd choice
not the 1st. The primary route group (gw) would the 1st in the list.
Respectfully Charles George
Date: Wed, 26 Aug 2009 11:08:15 -0400
From: ssarr...@drsllc.net
To: bobwmcg...@verizon.net;
All,
Any help will be greatly appreciated.
For some reason just like that my vmware machines cannot ping the local gw or
my windows machine. So as of now I have no lab to work on.
I then uninstall workstation and installed vm server and its is the same thing.
The vm nic is
pool A re-route its outbound local call route out Gateway
B’s (California) PRI Pre-pending a 1
From: Steve Sarrick [mailto:ssarr...@drsllc.net]
Sent: Wednesday, August 26, 2009 11:20 AM
To: c george; bobwmcg...@verizon.net; ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice
, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab
Certifications.
--
On Aug 26, 2009, at 5:12 PM, c george wrote:
i beleive it is the other way around. The local group would be the 2nd choice
not the 1st. The primary route group (gw) would the 1st in the list.
Respectfully
how many times do you let the phone ring before you answer. I have a vcon pri
simulator and a vcon pri\pstn simulator
I notice that if I answer the call (PSTN Phone) before the 3 ring the call drop
when answer. If I answer after 3 rings it connects just fine and I can
transfer back etc
vmware wks 5.3 then I downloaded vmware server 2.0.
It is installed ontop of window 2003 enterprise.
wks 5 was working then just like that it stopped. I think it all happened right
after installing IE 7
so then i uninstalled wks and installed server 2.0 same issue. Cannot connect
to
writing apple right now to send you endorsement money
Respectfully Charles George
Date: Wed, 26 Aug 2009 15:13:26 -0700
Subject: Re: [OSL | CCIE_Voice] vmware proble help!
From: tanner.ez...@gmail.com
To: d...@bestoftnt.com
CC: cisco...@hotmail.com; ccie_voice@onlinestudylist.com;
in the admin web page, put the changes back in the network utility and
refresh network settings again. I know it's hoky but it's been working for me
and I have been too busy to look for a real fix.
Sent while mobile
On Aug 26, 2009, at 14:32, c george cisco...@hotmail.com wrote:
vmware wks 5.3
4) can you go from VM - your default GW on your home NW?
5) Sounds silly, make sure the network is bridged
cant check the last 2 above the ccm install fails with 4600 on the bottom of
the screen
Respectfully Charles George
CC: j...@slash128.com; ccie_voice@onlinestudylist.com;
i can. been on i thru out the day
Respectfully Charles George
From: rachellthorn...@gmail.com
To: arunv...@gmail.com; wchatc...@gmail.com
Date: Mon, 24 Aug 2009 17:15:11 -0700
CC: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Can anyone access the IPExpert web site
How is this command entered in ccm
run sql insert into telecasterservice
('ca69f2e4-d088-47f8-acb2-ceea6722272e','Voicemail','Voicemail','Voicemail','Application:Cisco/Voicemail',2,'t',1)
run sql insert into telecasterservice
soory about asking this question. I did not realise that you had to add the
whole line
Respectfully Charles George
From: cisco...@hotmail.com
To: ccie_voice@onlinestudylist.com; ccie_voice-boun...@onlinestudylist.com
Date: Sun, 16 Aug 2009 18:02:58 +
Subject: [OSL | CCIE_Voice] no
put them in their own css and add a translation pattern blocking the numbers
you want in the same css at the line level
Respectfully Charles George
From: kevin.dami...@vitalsite.com
To: ccie_voice@onlinestudylist.com
Date: Fri, 14 Aug 2009 09:05:53 -0500
Subject: [OSL | CCIE_Voice] 11
no your not. Its a typo. It seems betwwen the proctor guide and lab book some
words were lost in translation. But only a few
Respectfully Charles George
From: kizilde...@gmail.com
Date: Thu, 13 Aug 2009 16:37:14 +0200
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Volume 1
george cisco...@hotmail.com wrote:
From: c george cisco...@hotmail.com
Subject: RE: [OSL | CCIE_Voice] CUE Script for AA
To: kck...@yahoo.com
Date: Thursday, August 13, 2009, 2:57 PM
are you saying when you open the script in the editor no parameters show at the
bottom left hand corner?
if you
Mick
From: c george cisco...@hotmail.com
Date: Wed, 12 Aug 2009 15:38:21 +
To: mciarfe...@iplogic.com, ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] 9.2 - BACD from SIP phone -- dtmf relay problem
Micheal,
Here goes everything.
Even after changing the Code to 12.4 22T2
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucm/install/7_1_2/ipchange/ipchg712.html
Respectfully Charles George
Date: Wed, 12 Aug 2009 14:58:13 -0400
From: scott.odonn...@gmail.com
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Changing IP Address of CM 7.01
; ccie_voice@onlinestudylist.com
Date: Mon, 10 Aug 2009 23:24:45 -0400
Subject: RE: [OSL | CCIE_Voice] 9.2 - BACD from SIP phone -- dtmf relay problem
voip dial-peer not pots.
From: c george [cisco...@hotmail.com]
Sent: Monday, August 10, 2009 11:18 PM
To: Michael Ciarfello; ccie_voice
maybe you should rephrase your comment alittle maybe?!
Respectfully Charles George
Date: Mon, 10 Aug 2009 12:10:11 -0500
From: seanbda...@mavetech.com
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Impression of V3 - My two cents worth.
This was my third time around,
I can access the tcl from the PSTN. I have 2 vconsole simulators. 1 for PRI
and the other for POTS with 2 PRI ports that I connect to te PRI Simulator.
What I cannot do is call the TCL scripts internall from any phone. I have
everything configured correctly according to Cisoc and IPX. I
problem
voip dial-peer not pots.
From: c george [cisco...@hotmail.com]
Sent: Monday, August 10, 2009 11:18 PM
To: Michael Ciarfello; ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] 9.2 - BACD from SIP phone -- dtmf relay problem
I can access the tcl from the PSTN. I have 2
gw hopofff configure this since the destination is not on the router but yu a
asking the router to forward it out its gw
Respectfully Charles George
Date: Sun, 9 Aug 2009 09:45:18 +0300
From: wchatc...@gmail.com
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] PSTN
; ccie_voice@onlinestudylist.com
The destination is on the router. It is part of the CME configuration for the
PSTN. Unless it is not reconizing that for some reason.
On Sun, Aug 9, 2009 at 12:08 PM, c george cisco...@hotmail.com wrote:
gw hopofff configure this since the destination
same for me. I am realy starting to think the issue I am having and it is a few
is because of the phone models being 7961's sccp and sip
When I am finished with all labs I will rent from IPX and then test and see if
I enconuter the same issues when using their equipment
Respectfully
1st do you have dsp serv dspfarm comfigured under the voice card?
is so and still you have nothing available for sessions then you need more dsp's
I just had to order more on ebay as I could not do conferencing and xcoding.
ebay is my friend it should be here next week
Respectfully
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of c george
Sent: Tuesday, August 04, 2009 2:28 PM
To: jonv...@gmail.com
Cc: ccie_voice@onlinestudylist.com; ccie_voice-boun...@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] sip aar problem
let me also add this is a h323 gw
and when
was getting out of
bandwidth messages when dialing, say, 911 from HQ—nothing too important.
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of c george
Sent: Tuesday, August 04, 2009 2:28 PM
To: jonv...@gmail.com
Cc: ccie_voice
: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of c george
Sent: Tuesday, August 04, 2009 2:28 PM
To: jonv...@gmail.com
Cc: ccie_voice@onlinestudylist.com; ccie_voice-boun...@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] sip aar problem
let me also
im lost
the calls goes to the local route group 1st and from there it goes out to the
individual local gw's respectively were the manipulation is done as normal
but in srst mode none of this matters. the calls or going directly to the
gateways the phone registers with
or am i
I had the same issue.
You did not add these files from flash.
1st do a sh flash | in 7961
ding this to see if the sip files for a 7961 is loaded in flash
then add those files to the tftp-server flash:
Respectfully Charles George
Date: Wed, 5 Aug 2009 08:49:31 -0700
From:
of this transmission is strictly
prohibited. If you have received this transmission in error, please notify the
sender immediately by return e-mail (or email gwen...@yahoo.com) and destroy
the transmission by deleting the original message attachments and all copies.
From: c george
Hello,
While we are doing labs at your Ipexpert BootCamp in Ohio, are we, do we, have
access to the Cisco Documentaton CD?
Respectfully Charles George
_
Get your vacation photos on your phone!
1st of this is only a Sip Problem
7961 phone firmware Sip 41.8-5-2s
CUCM 7.1.2009
AAR works
but when I call a PSTN NUMBER by dialing 9+PSTN the call fails stating not
enough Bandwidth.
But AAR works. When dialing a Internal number call reroutes as is expected.
3000 - 4375553000.
different css for sip and sccp
everything is fine with sccp
this is only a issue with a sip phone
makes no sense to me because PSTN Calling should not have anything to do do
with how much bandwith you have. The call is going out its local gateway.
Respectfully Charles George
great idea!!
same results. sip phone 7961 cannot call out dialing a PSTN #. (9+#)
But AAR works. internal number shows reroting and dials over the PSTN.
is anyone else using a 7961 and checked sip aar for both internal and dialing a
pstn number directly while in a low bandwidth state
voice card
dsp ser dspfarm
sccp ...
ass profile 1 register (name)
use this name when (name) when registering the xcode to cucm. If it is a pvdm2
you need to select enhance transcoding ios
if this is cume
under telephony-service
sdspfarm units should be 2
if it is
...@onlinestudylist.com
[ccie_voice-boun...@onlinestudylist.com] On Behalf Of c george
[cisco...@hotmail.com]
Sent: Tuesday, August 04, 2009 4:28 PM
To: pa...@marshallcomm.com; dave.gen...@insight.com;
ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] DSP Admin DOWN
voice card
dsp ser
nothing in mines
Respectfully Charles George
From: mthompson...@gmail.com
To: jonv...@gmail.com; md...@proctorlabs.com
Date: Tue, 4 Aug 2009 22:03:06 -0400
CC: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Volume 2 and Videos?
Anyone else seeing anything in their 'my
is what we have here from IPEXPERT enough to conquer this version of the lab
Respectfully Charles George
Date: Fri, 31 Jul 2009 13:04:30 -0500
From: jonv...@gmail.com
To: lakpr...@gmail.com
CC: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Thoughts on V3
It was,
when will v3 voice lab book 2 be completed and cost if known
Respectfully Charles George
From: groupst...@ipexpert.com
To: tanner.ez...@gmail.com
Date: Fri, 31 Jul 2009 21:53:34 -0400
CC: ccie_voice@onlinestudylist.com; alex.han...@gmail.com
Subject: Re: [OSL | CCIE_Voice] Volume 2
depends?
you cannot do cme 7.x with it. Absent that I guess you can
Respectfully Charles George
Date: Thu, 30 Jul 2009 06:47:29 +0530
From: lakpr...@gmail.com
To: j...@slash128.com
CC: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Home Lab Questions
Guys,
Can we use
?
Thanks,
-Jeff
On Wed, Jul 29, 2009 at 9:39 PM, c george cisco...@hotmail.com wrote:
depends?
you cannot do cme 7.x with it. Absent that I guess you can
Respectfully Charles George
Date: Thu, 30 Jul 2009 06:47:29 +0530
From: lakpr...@gmail.com
To: j...@slash128.com
CC: ccie_voice
If you are instructed in the lab not to use fr.12, is there any way you could
still use auto qos?
Respectfully Charles George
_
NEW mobile Hotmail. Optimized for YOUR phone. Click here.
if ypou are following the guide did you do the application rules setup.
I had the same issue doing it on my own. followed the guide and did application
rules, restarted mobility service and all is well
Respectfully
Charles George
From: mthompson...@gmail.com
To:
as that dictates to use Device Pool
Calling party Transformation.
The Transformation Pattern is set to use Calling Party’s
external number mask for 1XXX calls.
From: c george
[mailto:cisco...@hotmail.com]
Sent: Friday, July 24, 2009 3:46 PM
To: mthompson...@gmail.com; ccie_voice
Cisco product documentation is not available on the web in the lab anymore?
Respectfully
Charles George
Date: Thu, 23 Jul 2009 16:54:14 -0400
From: earl.ho...@sarcom.com
To: kevin.dami...@vitalsite.com; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Documentation at voice
of the old Doc CD are available, but global
search from the main website I believe has been disabled. The docs I mentioned
are the ones which are directly accessible from the desktop. The other
documentation has to be navigated through the web site.
From: c george
[mailto:cisco
enable faststart inbound on the gateway. I this was spoke about before and this
worked for me.
Respectfully
Charles George
Date: Tue, 21 Jul 2009 11:35:14 -0500
From: jonv...@gmail.com
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] SIP on CCME via H.323 Gatekeeper to CUCM
isnt the xlite for cme only ?
Respectfully
Charles George
Date: Fri, 17 Jul 2009 13:06:52 -0700
From: e_er...@yahoo.com
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] X-Lite phone call
hi,
anybody experience this ?
I register x-lite SIP phone and phone register fine, but
what is not happening ?
Can you be a little more specific?
Both phones not ringing, no mobility template etc
Respectfully
Charles George
Date: Thu, 16 Jul 2009 13:07:42 +0300
From: wchatc...@gmail.com
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Troubleshhoting Unified
Yes, as of 2 days ago when I post something I do not see it show up on the this
forum. Even replying I do not see the response.
This started 2 or 3 days ago.
Respectfully
Charles George
From: dle...@ipexpert.com
To: ccie_voice@onlinestudylist.com
Date: Mon, 13 Jul 2009 11:26:32 -0400
.
From: ccie_voice-boun...@onlinestudylist.com
[ccie_voice-boun...@onlinestudylist.com] On Behalf Of c george
[cisco...@hotmail.com]
Sent: Monday, July 13, 2009 6:23 PM
To: ccie_voice@onlinestudylist.com; ccie_voice-boun...@onlinestudylist.com
Subject: [OSL | CCIE_Voice] sip 7961 upgrade failure
don't see a requirement
for them in the admin guide.
From: c george [cisco...@hotmail.com]
Sent: Tuesday, July 14, 2009 11:30 PM
To: Michael Ciarfello; ccie_voice@onlinestudylist.com;
ccie_voice-boun...@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] sip 7961 upgrade failure
From: c george
[mailto:cisco...@hotmail.com]
Sent: Wednesday, July 15, 2009 1:46 AM
To: Michael Ciarfello; ccie_voice@onlinestudylist.com;
ccie_voice-boun...@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] sip 7961 upgrade failure
thats the joke. You do need them and have
try a reset of the phone and see if it applies.
you probably did not see it to reset the phones when finished
Respectfully
Charles George
Date: Wed, 15 Jul 2009 21:14:26 +0100
From: adefilabi...@gmail.com
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] BULK ADMINISTRATION
I just got a 7961 sip phone
installed on cme 7.1
it keeps failing to upgrade
config etc
BR2#sh run | b voice reg
voice register global
mode cme
source-address 10.11.203.1 port 5060
max-dn 14
max-pool 3
load 7961 SIP41.8-4-2S
load 7960-7940 P0S3-08-6-00
time-format 24
date-format
I was not paying attention. I di not add all the tftp-server commands for the
7961 sip code.
All is well now
Respectfully
Charles George
From: cisco...@hotmail.com
To: ccie_voice@onlinestudylist.com; ccie_voice-boun...@onlinestudylist.com
Date: Mon, 13 Jul 2009 22:23:37 +
Subject: [OSL
the stationD and the Station ID
2009/7/2 c george cisco...@hotmail.com
look for the 1st occurrence of the number then look for the ID number and start
looking for that.
This will show you the signaling everything once you search by the id number.
It is usually : followed by a number on the right hand
as far as the config you sent I do not see the voice template
you create this apply it to the phone. Template #
under the template you apply the dialplan and then save reboot. It works just
fine for me.
On CUCM it was not working then after 3 reboots it just kicked in working
no need to be rude
Respectfully
Charles George
Date: Tue, 30 Jun 2009 02:06:52 +1000
From: jeremy.coo...@gmail.com
To: groupst...@ipexpert.com
CC: ccie_voice@onlinestudylist.com; mciarfe...@iplogic.com
Subject: Re: [OSL | CCIE_Voice] Dialed num analyzer result is different than
what
63 matches
Mail list logo
