gateway?
i remember i read it from cisco notes saying it need to be turn on.
Regards,
Alex
On Fri, Mar 25, 2011 at 1:38 AM, study2b ccie study4ccievo...@gmail.com
wrote:
Hi experts,
I had configured MVA using hairpin method.
Everything worked and calls went out, but when I picked it up
Hi experts,
I had configured MVA using hairpin method.
Everything worked and calls went out, but when I picked it up, there were no
audio!
Has anyone seen this problem before?
Where should I start to troubleshoot?
FYI, both of dial-peers voip are using no vad and G711ulaw. I can see calls
for your help!
On Tue, Dec 28, 2010 at 3:34 PM, Prashant Patel
prashantpatel...@gmail.comwrote:
Did the HQ1 phone have access to the route pattern to call the BR1 SNR
Number?
On Tue, Dec 28, 2010 at 6:06 PM, study2b ccie
study4ccievo...@gmail.comwrote:
Hello experts,
Happy Holidays
://tsgnoc.wordpress.com
*From:* ccie_voice-boun...@onlinestudylist.com [mailto:
ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *study2b ccie
*Sent:* Wednesday, December 29, 2010 1:57 PM
*To:* Prashant Patel
*Cc:* OSL
*Subject:* Re: [OSL | CCIE_Voice] Single Number Reach
Hi Prashant
Hello experts,
when entering sh gatek gw I have:
GATEWAY TYPE PREFIX TABLE
=
Prefix: 34*
Zone GK master gateway list:
10.10.202.1:1720 CUCME
Prefix: 1*
Zone GK master gateway list:
10.10.210.10:1720 GK-Trunk_1
10.10.210.11:1720 GK-Trunk_2
I followed
Hello experts,
Happy Holidays!
I was in a vRack session this morning. I worked on Single Number Reach. Here
was my problem:
PSTN-Br1(SNR), both Br1 and PSTN rang, SNR worked.
HQ1-Br1(SNR), only Br1 rang, PSTN did not ring, but when I chose to push
the call out to mobile phone using Mobility
Hello experts,
Has anyone got the enhanced iDivert function working?
I followed the CUCM feature and serivce guide:
1) Create softkey template for iDivert;
2) Set Use Legacy iDivert to false in the service parameter.
When A calls B, B forwards to C, and when C presses iDivert softkey, I did
Hello experts,
I am working on CFUR and have a question:
When BR1 phones go into SRST mode(I am using call-manager-fallback), I can
get HQ phones ring to BR1 Phone 2
On the BR1 Phone 2 screen, it showed:
From 2123945002 (by 1002)
Instead of show by 1002, what do I need to do for it to show a
and the intraregion codec is 711).
Else, check the SDI trace to see why CUCM rejects the call.
regards
kobel
On Wed, Dec 8, 2010 at 14:44, study2b ccie study4ccievo...@gmail.comwrote:
Thank you guys for the support, I have tried all the suggestions but it
did not work.
I will try again
this.
On Dec 7, 2010, at 8:18 PM, ccieid1ot ccieid...@gmail.com wrote:
What's the region set? U set ur dial peer to g711.
On Dec 7, 2010 8:18 PM, study2b ccie study4ccievo...@gmail.com
study4ccievo...@gmail.com wrote:
Hello Experts,
I was on the vRack today and experienced a strange behavior
Hello Experts,
I was on the vRack today and experienced a strange behavior between H323 and
CUCM.
BR1 router was running H323, connected to CUCM.
All calls, both inbound and outbound between BR1 and PSTN, failed, they rang
once and then get dropped.
Failed message under Debug ISDN Q931 was:
11 matches
Mail list logo