transcode the call legs between the G729 SIP inbound from the
WAN and the G711 SIP outbound to CUE?JD
From: [EMAIL PROTECTED]: [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL
PROTECTED]: Thu, 21 Feb 2008 18:04:26 -0800Subject: Re: [OSL | CCIE_Voice] CUE
FNA FB Problem
I see that you are using SI
EMAIL PROTECTED]
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]; ccie_voice@onlinestudylist.com
Date: Thu, 21 Feb 2008 18:04:26 -0800
Subject: Re: [OSL | CCIE_Voice] CUE FNA FB Problem
I see that you are using SIP inbound using g729 and using SIP
outbound using g711u. This scenario is not supported
P
inbound from the WAN and the G711 SIP outbound to CUE?
JD
From: [EMAIL PROTECTED]: [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL
PROTECTED]: Thu, 21 Feb 2008 18:04:26 -0800Subject: Re: [OSL | CCIE_Voice] CUE
FNA FB Problem
I see that you are using SIP inbound using g729 and using SIP outb
39
PMTo: [EMAIL PROTECTED]; 'Jose Linero Welcker'; [EMAIL PROTECTED]: RE: [OSL |
CCIE_Voice] CUE FNA FB Problem
Vik, Sorry to revisit this post again. I don't know if this issue has been
resolved, but i ran into the same problem that Jose ran into with forwarding
calls to CUE from
t this point. Is there any other
debug that i can get to find out where the problems lie? Thank you for any
suggestion.
JD
_
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]; [EMAIL PROTECTED];
ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] CUE FNA FB Problem
Date: Thu,
st.com
Subject: RE: [OSL | CCIE_Voice] CUE FNA FB Problem
No, i already checked that and it was there along with transfer-pattern.
Here is my telephony service configuration.
telephony-service
load 7910 P00403020214
load 7960-7940 P00307020400
max-ephones 5
max-dn 15
ip source-address 172.25.1
-01 4.4.20 UP N/A FREE xcode 1
- - -01 4.4.20 UP N/A FREE xcode 1 -
- - Total number of DSPFARM DSP channel(s) 4
From: [EMAIL PROTECTED]: [EMAIL PROTECTED]; [EMAIL PROTECTED]: Wed, 20 Feb 2008
16:02:17 -0800Subject:
Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab
Certifications.
From: Devildoc [mailto:[EMAIL PROTECTED] Sent: Thursday, February 21, 2008 1:39
PMTo: [EMAIL PROTECTED]; 'Jose Linero Welcker'; [EMAIL PROTECTED]: RE: [OSL |
CCIE_Voice] CUE FNA FB Probl
ccie_voice@onlinestudylist.com
Date: Wed, 20 Feb 2008 16:02:17 -0800
Subject: Re: [OSL | CCIE_Voice] CUE FNA FB Problem
when you use the "service session" can you get an active call and enter the
command "sh call act voice brief" and find out what codecs and what
protocols a
.20
UP N/A FREE xcode 1 - - -01 4.4.20 UP
N/A FREE xcode 1 - - -
Total number of DSPFARM DSP channel(s) 4
From: [EMAIL PROTECTED]: [EMAIL PROTECTED]; [EMAIL PROTECTED]: Wed, 20 Feb 2008
16:02:17 -0800Subject: Re: [OSL | CCIE_Voice] CUE FNA FB Pro
2008 2:21 PM
To: [EMAIL PROTECTED]; ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] CUE FNA FB Problem
Hi Vik:
Thanks for your answer, to make the things clear, if I have different codecs
one of the legs shoud be H323, wright?, however if I use G711 in both legs,
then I can use sip-to-sip, w
CTED] On Behalf Of Jose Linero
WelckerSent: Wednesday, February 20, 2008 1:17 PMTo: [EMAIL PROTECTED]: [OSL |
CCIE_Voice] CUE FNA FB Problem
Hi all: I have this configuration: CM --- H323 Trunk --- IPIPGW --- SIP Trunk
--- CME The H323 is using G711 and the the SIP Trunk is using G729, the calls
be
ions.
_
From: Jose Linero Welcker [mailto:[EMAIL PROTECTED]
Sent: Wednesday, February 20, 2008 2:01 PM
To: [EMAIL PROTECTED]; ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] CUE FNA FB Problem
Hi Vik:
Yes it is just for the calls coming from the WAN, What I am seeing is the
CME sen
se Linero
WelckerSent: Wednesday, February 20, 2008 1:17 PMTo: [EMAIL PROTECTED]: [OSL |
CCIE_Voice] CUE FNA FB Problem
Hi all: I have this configuration: CM --- H323 Trunk --- IPIPGW --- SIP Trunk
--- CME The H323 is using G711 and the the SIP Trunk is using G729, the calls
between the phones in CCM an
orage
Lab Certifications.
_
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jose Linero
Welcker
Sent: Wednesday, February 20, 2008 1:17 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] CUE FNA FB Problem
Hi all:
I have this configuration:
CM --- H323 Trunk -
gt; Jose
>
> --
> Date: Wed, 20 Feb 2008 15:33:27 -0600
> From: [EMAIL PROTECTED]
> To: [EMAIL PROTECTED]
> Subject: Re: [OSL | CCIE_Voice] CUE FNA FB Problem
> CC: [EMAIL PROTECTED]; ccie_voice@onlinestudylist.com
>
>
> You might have a codec i
rds, Jose
From: [EMAIL PROTECTED]: [EMAIL PROTECTED]; [EMAIL PROTECTED]: Wed, 20 Feb 2008
13:22:47 -0800Subject: Re: [OSL | CCIE_Voice] CUE FNA FB Problem
You are missing an incoming dialpeer for your g729 voip connection on your cme
router. Either create a dedicated incoming dialpeer for y
ice@onlinestudylist.com
> Date: Wed, 20 Feb 2008 13:22:47 -0800
> Subject: Re: [OSL | CCIE_Voice] CUE FNA FB Problem
>
>
> You are missing an incoming dialpeer for your g729 voip connection on your
> cme router. Either create a dedicated incoming dialpeer for your g729 voip
> con
PROTECTED]: [EMAIL PROTECTED]: Wed, 20 Feb 2008 21:17:11
+Subject: [OSL | CCIE_Voice] CUE FNA FB Problem
Hi all: I have this configuration: CM --- H323 Trunk --- IPIPGW --- SIP Trunk
--- CME The H323 is using G711 and the the SIP Trunk is using G729, the calls
between the phones in CCM and
PROTECTED]: [EMAIL PROTECTED]: Wed, 20 Feb 2008 21:17:11
+Subject: [OSL | CCIE_Voice] CUE FNA FB Problem
Hi all: I have this configuration: CM --- H323 Trunk --- IPIPGW --- SIP Trunk
--- CME The H323 is using G711 and the the SIP Trunk is using G729, the calls
between the phones in CCM and CME
Hi all:
I have this configuration:
CM --- H323 Trunk --- IPIPGW --- SIP Trunk --- CME
The H323 is using G711 and the the SIP Trunk is using G729, the calls between
the phones in CCM and CME are working without problems, however when I am going
to forward the call to CUE due CFNA or CFB I r
21 matches
Mail list logo