*To:* Karen Johnson karen.johnson...@yahoo.ca
*Cc:* Robert Thomas tho...@gmail.com; ccie_voice@onlinestudylist.com
ccie_voice@onlinestudylist.com
*Sent:* Wednesday, June 19, 2013 7:30:11 AM
*Subject:* Re: [OSL | CCIE_Voice] Change B-Channel Maintenance Status
Normally I don't post unless
From Exam Point Of view
Using the manual method is the best and time saving method
So whether it is fractional PRI OR full PRI use the manual method
It will save the time
Any way even if we The TFTP method still we have to add the
mgcp dtmf, and isdn outgoind command manually, So USE MANUAL
karen.johnson...@yahoo.ca
Cc: Robert Thomas tho...@gmail.com; ccie_voice@onlinestudylist.com
ccie_voice@onlinestudylist.com
Sent: Wednesday, June 19, 2013 7:30:11 AM
Subject: Re: [OSL | CCIE_Voice] Change B-Channel Maintenance Status
Normally I don't post unless there is something to be said
:11 AM
*Subject:* Re: [OSL | CCIE_Voice] Change B-Channel Maintenance Status
Normally I don't post unless there is something to be said.
Sorry to say this is not old story. Cisco doesn't support fractional
MGCP PRIs, that is for both E1 and T1, and only 5 endpoints with the
b-channel
@onlinestudylist.com ccie_voice@onlinestudylist.com
Sent: Sunday, June 16, 2013 9:42:51 PM
Subject: Re: [OSL | CCIE_Voice] Change B-Channel Maintenance Status
Karen,
Those parameters are old story. The were used back in the 6608 days, have no
use on the current MGCP GW. If you configure your PRI as fractional
ccie_voice@onlinestudylist.com
Sent: Sunday, June 16, 2013 9:42:51 PM
Subject: Re: [OSL | CCIE_Voice] Change B-Channel Maintenance Status
Karen,
Those parameters are old story. The were used back in the 6608 days, have no
use on the current MGCP GW. If you configure your PRI as fractional
16, 2013 9:42:51 PM
*Subject:* Re: [OSL | CCIE_Voice] Change B-Channel Maintenance Status
Karen,
Those parameters are old story. The were used back in the 6608 days, have
no use on the current MGCP GW. If you configure your PRI as fractional with
less timeslots, CUCM would audit the port
ricardoareval...@gmail.com
To: Karen Johnson karen.johnson...@yahoo.ca
Cc: Robert Thomas tho...@gmail.com; ccie_voice@onlinestudylist.com
ccie_voice@onlinestudylist.com
Sent: Wednesday, June 19, 2013 7:30:11 AM
Subject: Re: [OSL | CCIE_Voice] Change B-Channel Maintenance Status
Normally I don't
@onlinestudylist.com
ccie_voice@onlinestudylist.com
*Sent:* Wednesday, June 19, 2013 7:30:11 AM
*Subject:* Re: [OSL | CCIE_Voice] Change B-Channel Maintenance Status
Normally I don't post unless there is something to be said.
Sorry to say this is not old story. Cisco doesn't support fractional
when do MGCP, i come across service parameter Change B-Channel Maintenance
Status and they only have 5 box.
- does that mean in one cluster we can have 5 GW that use partial PRI with MGCP
?
- if i plan to use partial PRI in MGCP, do i need to also busy out above
paramater or
pri-group
I would do the config manually on the gateway and not worry about this in the
real world
Sent from my iPhone
On Jun 16, 2013, at 4:25 PM, Karen Johnson karen.johnson...@yahoo.ca wrote:
when do MGCP, i come across service parameter Change B-Channel Maintenance
Status and they only have 5
Karen,
Those parameters are old story. The were used back in the 6608 days, have
no use on the current MGCP GW. If you configure your PRI as fractional with
less timeslots, CUCM would audit the port and the GW report back an error
for that endpoint, CUCM will then mark it out of service
12 matches
Mail list logo
