Ashwani,
you're right. when i uncheck the Enterprise subcription i can see it . thanks
for your help dude..
Thank you.
Regards,
krishna.
From: Ashwani
To: 'Krishna'
Sent: Saturday, June 9, 2012 6:58 PM
Subject: RE: [OSL | CCIE_Voice]
Make sure you checked the "enable" box when you created the service, then
subscribe the phone to the service. It'll show up on the Services key. If you
want it as a "line key" you have to add a SURL key and attach it there after
you subscribe the phone to the service.
DQ
d...@cisco.com
Sent f
hi folks,
http://10.10.210.5:6293/ipphone/jsp/sciphonexml/IPAgentInitial.jsp is the one i
created under phone services, but when i want to subsrcibe this service to
device i.e.phone, its not showing up. Is there any service activation required
to make this work?? your help is greatly appreciate
reboot cm
adefila seun wrote:
the ICD icon is not showing inte device association for the IPCC.
tried restarting the IIS Admin services but it always fail
Anyone with a fix
thanks
--
Power up the Internet with Yahoo! Toolbar.
http://pr.mail.yahoo.co.jp
the ICD icon is not showing inte device association for the IPCC.
tried restarting the IIS Admin services but it always fail
Anyone with a fix
thanks
.392.9760
> (c) 314.852.1252
>
>
>
>
> -Original Message-
> From: ccie_voice-boun...@onlinestudylist.com
> [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Chris
> Parker
> Sent: Friday, December 19, 2008 1:33 PM
> To: ccie_voice@onlinestudylist.co
voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Chris
Parker
Sent: Friday, December 19, 2008 1:33 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] ICD ring before transfer to agent
Does anyone know how to make a call that goes out of queue rin
Does anyone know how to make a call that goes out of queue ring when the
call is sent to the agent? Here are the requirements:
1) If no agents are available, call is queued and MoH is played.
2) When an agent becomes available and the call goes out of queue and is
sent to the agent, the caller
hat should I do ?
Thks in advance
Rgds,
--- On Fri, 10/31/08, Mark Snow <[EMAIL PROTECTED]> wrote:
From: Mark Snow <[EMAIL PROTECTED]>
Subject: Re: [OSL | CCIE_Voice] ICD device not register to Call Manager ??
To: [EMAIL PROTECTED]
Cc: ccie_voice@onlinestudylist.com
Date: Friday,
When you say your ICD Device - are you speaking of two CTI Ports that
do not show as registered - but your CTI Route Point does show as
registered?
I would go over and check things on the UCCX box. Check the JTAPI
Subsystem - do a "check sync status" (not in front of me so forgive
the sli
hi all,
I tried to config IPCC express 4.0 and CCM 4.1 , however my ICD device
(ICD_1701 and ICD_1702) status still said "Not Found " and I can not call
ext 1700, which is my RP
but the RP_1700 is registered, anybody can help me please ??
Thks
I actually ran into this problem yesterday and rebooted the server... (after
several unsuccessful Engine restarts...) after I added the IPPA service,
JTAPI died... a reboot fixed it...
Not sure which service tho...
Jonathan
On Sun, Sep 7, 2008 at 9:37 AM, Devildoc <[EMAIL PROTECTED]> wrote:
>
Thanks Vik!!!
JD
From: [EMAIL PROTECTED]: [EMAIL PROTECTED]: Re: [OSL | CCIE_Voice] ICD
Extension Not Showing UpDate: Sun, 7 Sep 2008 08:49:49 -0700CC:
ccie_voice@onlinestudylist.com
IIS Admin service.Vik Malhi - CCIE#13890
Senior Technical Instructor - IPexpert Inc
Telephone
ame of the service.
JD
> Date: Sun, 7 Sep 2008 11:12:17 -0400> From: [EMAIL PROTECTED]> To:
> ccie_voice@onlinestudylist.com> Subject: [OSL | CCIE_Voice] ICD extension Not
> Showing up> > You need to associate the ICD extension to the rmjtapi user.
> Once> ass
IIS Admin service.
Vik Malhi - CCIE#13890
Senior Technical Instructor - IPexpert Inc
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Mailto: [EMAIL PROTECTED]
Join IPexpert's Free CCIE Peer Groups & Study Communities at
www.IPexpert.com/communities
On Sep 7, 2008, at 7:37 AM, Devildoc <[EMAIL
Charles)
3. Re: Failed GK Calls to IPCC Services (Jonathan Charles)
--
Message: 1
Date: Sun, 7 Sep 2008 07:37:10 -0700
From: Devildoc <[EMAIL PROTECTED]>
Subject: [OSL | CCIE_Voice] ICD Extension Not Showing Up
To: CCIE V
I know there was a post on here a while back that has the solution to restart a
certain IPCC Express service to have the ICD extension showing up when you try
to associate a user to an ICD resource. Does anyone know what's the service
name? I can't find it anywhere. It's not the CRS Engine s
D]
[mailto:[EMAIL PROTECTED] On Behalf Of Jane Ryer
(jryer)
Sent: Monday, May 26, 2008 11:18 AM
To: OSL CCIE Voice Lab Exam
Subject: Re: [OSL | CCIE_Voice] icd extension
Greg,
During one of my study sessions, I totally screwed up my Pub server by
restarting the IIS service, and the Proctor
rote:
Hello All,
I have registered BR1 and Cat6K in the CCM, when i do sh port on
cat6k or sh ccm on BR1, it shows status as registered but CCM
shows registration as unknown.
I have restarted CCM several times, i deleted and re-add also
several time.
thnks
------ next part --
setting parameters?
Thanks,
Zsolt
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Matt
Sent: Saturday, December 29, 2007 1:07 AM
To: 'Ted Meng'; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] ICD option disapear on U
1:33 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] ICD option disapear on User device assocation
Need help..
Met this issue for couple times that when practicing on Proctorlabs remote
racks (rack 5 for example), I could not see the ICD option under the user
device association.
Reboot worked. Thanks.
Subject: RE: [OSL | CCIE_Voice] ICD option disapear on User device assocation
Date: Fri, 28 Dec 2007 17:44:08 +0100
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]; ccie_voice@onlinestudylist.com
Hi!
That can mean a problem with your IPCC integration. Try to
] On Behalf Of Ted Meng
Sent: Friday, December 28, 2007 5:33 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] ICD option disapear on User device
assocation
Need help..
Met this issue for couple times that when practicing on Proctorlabs
remote racks (rack 5 for example), I could not
Need help..
Met this issue for couple times that when practicing on Proctorlabs remote
racks (rack 5 for example), I could not see the ICD option under the user
device association. Any ideas? Thanks.
Ted
Hi everybody,
about month ago somebody had started this thread:
> > Hi all,> > When we are using an agent in CRA ICD the agent has to log in and afterpush> the ready button to become available to the application, is there any form
> that just entering the log in information the agent becomes
Hi Mark:
Could you tell me how can I do that?
Regards,
Jose
From: Mark Snow <[EMAIL PROTECTED]>
Reply-To: <[EMAIL PROTECTED]>
To: "'Jose Linero Welcker'"
<[EMAIL PROTECTED]>,
Subject: RE: [OSL | CCIE_Voice] ICD Agent Ready
Date: Sun, 4 Jun 2006 08:24:
TED] On Behalf Of Jose Linero Welcker
> Sent: Sunday, June 04, 2006 8:17 AM
> To: ccie_voice@onlinestudylist.com
> Subject: [OSL | CCIE_Voice] ICD Agent Ready
>
> Hi all,
>
> When we are using an agent in CRA ICD the agent has to log in and after
push
> the ready button to
Hi all,
When we are using an agent in CRA ICD the agent has to log in and after push
the ready button to become available to the application, is there any form
that just entering the log in information the agent becomes ready without
pushing the ready button on the phone.
Regards,
Jose
___
28 matches
Mail list logo