nified Communication Consultant
Cygate AB
From: Angel Perez [mailto:gorr...@hotmail.com]
Sent: den 23 februari 2010 10:00
To: iy...@nationwide.com; osl osl
Subject: Re: [OSL | CCIE_Voice] Zone prefix commands for lab 4A - 4.6
Hello:
First: with gw-priority 0 the call will never be routed thorugh
To: ccie_voice@onlinestudylist.com
From: iy...@nationwide.com
Date: Mon, 22 Feb 2010 15:00:13 -0500
Subject: [OSL | CCIE_Voice] Zone prefix commands for lab 4A - 4.6
I am a little confused with the solution for question 4.6 specifically the Zone
prefix commands.. The solution has the following
gw-priority 0 says "never use this gateway for this prefix". Essentially
they are put there for completeness to ensure that BR2RTR is never used for
the HQ and BR1 routes.
On Tue, Feb 23, 2010 at 6:00 AM, wrote:
>
> I am a little confused with the solution for question 4.6 specifically the
> Zon
When you set the priority to 0, it effectively disables that gateway
route for particular prefix. Prevents routing loops. If you don't add
the command, then by default BR2-RTR will have priority of 5, if in the
same zone as UCM.
-- Mustafa
iy...@nationwide.com wrote:
>
> I am a little confused
I am a little confused with the solution for question 4.6 specifically the
Zone prefix commands.. The solution has the following zone prefix commands
on the HQ RTR in addition to others
HQRTR(config-gk)#zone prefix PL 5... gw-priority 10 gk-trunk2
;;;
;;
;;
HQRTR (config-gk)#zo