The labs say to use an IP address if 10.10.115.2. So under the lo1 you need to
add ip unnumbered lo1(also make sure to add the OSPG statement if needed and
clear the ip OSPG process$
Then add the IP address and default gateway.
Then make sure to add the static route
Hth
Randall
On Oct 20,
Randall,
I believe the question is when going through the GUI initialization and it ask
for the IP address of CME, what IP address do you use?
Krishna,
Please correct me if I am wrong.
Sent from my iPhone
On Oct 20, 2012, at 9:06 PM, Rrcrumm rrcr...@yahoo.com wrote:
The labs say to use an
Cory, I read the question the same way you did. Krishna- either will work if
you're not using strict match in telephony service; however, I'd always match
whatever address you use in telephony service. Chances are the lab is going to
specify what address cme phones should use - I'd stay
, October 20, 2012 8:23 PM
Subject: Re: [OSL | CCIE_Voice] cme ip add or loopback ip in CUE??
Randall,
I believe the question is when going through the GUI initialization and it ask
for the IP address of CME, what IP address do you use?
Krishna,
Please correct me if I am wrong.
Sent from my iPhone
...@cisco.com
To: Cory Gray corygray22...@hotmail.com
Cc: Online Study ccie_voice@onlinestudylist.com
Sent: Saturday, October 20, 2012 9:10 PM
Subject: Re: [OSL | CCIE_Voice] cme ip add or loopback ip in CUE??
Cory, I read the question the same way you did. Krishna- either will work if
you're