Hi folks,
I couldn't understand the call flow between HQ and BR1 which are
provisioned/registed in the cucm. here is the detail structure:
HQ-phone1 -5002
css-hq-international
pt-pt-internal
BR1-phone1-1002
css-br1-ld
pt-pt-internal
Both phones are residing in the partition pt-internal,
You answered your own question. Both DNs are registered to CUCM and are in
partitions that the other's CSS can see. The signaling is between each phone
and UCM. The media is built directly phone to phone. If CAC failed the call
setup, then AAR could be invoked to use the PSTN. Since CAC allows
Krishna,
When dialing from station to station and both stations are registered to
UCM,
the call does not normally traverse through the PSTN (no AAR case).
The signaling media flows over voip directly which is why you dont see
any gateway / q931 debugs being active.
However for a Voip flow to
.
From: Dan Quinlan (daquinla) daqui...@cisco.com
To: Krishna vinayak_...@yahoo.com
Cc: ccie_voice@onlinestudylist.com
Sent: Monday, June 11, 2012 2:03 PM
Subject: Re: [OSL | CCIE_Voice] no trace found but calls get routed br1-Hq
You answered your own
Subject: Re: [OSL | CCIE_Voice] no trace found but calls get routed br1-Hq
You answered your own question. Both DNs are registered to CUCM and are in
partitions that the other's CSS can see. The signaling is between each phone
and UCM. The media is built directly phone to phone. If CAC
:03 PM
Subject: Re: [OSL | CCIE_Voice] no trace found but calls get routed br1-Hq
You answered your own question. Both DNs are registered to CUCM and are in
partitions that the other's CSS can see. The signaling is between each phone
and UCM. The media is built directly phone to phone
