Re: [Chevelle-list] Steering Column Rebuild?

Yes, no column shifter floor shift -Original Message- From: chevelle-list-boun...@chevelles.net [mailto:chevelle-list-boun...@chevelles.net] On Behalf Of Larry Williams Sent: Monday, March 15, 2010 2:23 PM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] Steering Column Rebuild

Re: [Chevelle-list] Steering Column Rebuild?

isn't that a 4 sp.? Jim Thompson wrote: Hi Larry, I put a tilt Firebird column in my 65. I will sell the original. SS M21 Jim -Original Message- From: chevelle-list-boun...@chevelles.net [mailto:chevelle-list-boun...@chevelles.net] On Behalf Of Larry Williams Sent: Thursday, March 11,

Re: [Chevelle-list] Steering Column Rebuild?

Thanks for the offer. I will keep my column and rebuild. I doesn't look too difficult. Larry Jim Thompson wrote: Hi Larry, I put a tilt Firebird column in my 65. I will sell the original. SS M21 Jim -Original Message- From: chevelle-list-boun...@chevelles.net [mailto:chevelle-list

Re: [Chevelle-list] Steering Column Rebuild?

Hi Larry, I put a tilt Firebird column in my 65. I will sell the original. SS M21 Jim -Original Message- From: chevelle-list-boun...@chevelles.net [mailto:chevelle-list-boun...@chevelles.net] On Behalf Of Larry Williams Sent: Thursday, March 11, 2010 8:21 PM To: Chevelle List Subject: [C

Re: [Chevelle-list] Steering Column Rebuild?

That's what I thought. On Sat, Mar 13, 2010 at 10:22 AM, Leonard P Sanders wrote: > No bearing is inside turn signal switch , cam rides against bearing.There > is a drawing in assm. manual If you have one. > > > On Sat 13/03/10 10:15 AM , Larry Williams larrydwilli...@hughes.net sent: > > Havin

Re: [Chevelle-list] Steering Column Rebuild?

No bearing is inside turn signal switch , cam rides against bearing.There is a drawing in assm. manual If you have one. On Sat 13/03/10 10:15 AM , Larry Williams larrydwilli...@hughes.net sent: > Having not disassembled the column I am making some uninformed > assumptions. Is the turn signal

Re: [Chevelle-list] Steering Column Rebuild?

Having not disassembled the column I am making some uninformed assumptions. Is the turn signal cam the upper bearing also? Larry Dan Rachlin wrote: I thought the bearing inside the turn signal was a part of the turn signal mech.? Can you get just the bearing? Dan On Sat, Mar 13, 2010 at 9:2

Re: [Chevelle-list] Steering Column Rebuild?

I thought the bearing inside the turn signal was a part of the turn signal mech.? Can you get just the bearing? Dan On Sat, Mar 13, 2010 at 9:26 AM, Larry Williams wrote: > Thanks. Where did you get the top bearing by the turn signal? > > Larry > > Leonard P Sanders wrote: > >> I have a 66 cheve

Re: [Chevelle-list] Steering Column Rebuild?

Thanks. Where did you get the top bearing by the turn signal? Larry Leonard P Sanders wrote: I have a 66 chevelle SS I am doing same thing. It started making squeaking noises.To make long story short,bearing in turn signal switch you can get (make sure you get right one there is two)and a low

Re: [Chevelle-list] Steering Column Rebuild?

I have a 66 chevelle SS I am doing same thing. It started making squeaking noises.To make long story short,bearing in turn signal switch you can get (make sure you get right one there is two)and a lower bearing on the outside of firewall close to steering box above rag joint The lower bearing is

Re: [Chevelle-list] Steering Column Rebuild?

There are bushings/bearings inside the column but the problem is going to be finding the components. Classic Muscle shows a few components still available but most say "call" or discontinued. Guess its possible that once you have the unit apart, you could match the components to an off the shel