I recently shot a film on a Panasonic AG-DV100B miniDV camera at 24p. Since NTSC (I'm in the U.S.) is 29.97fps, it is my understanding that the DVX100 uses a pulldown of 2:3:3:2 in order to make it possible to revert to the native 24p frames and edit that in post. The fourth paragraph of this Wikip
> No, you were not. :-)
>
> It is rather obvious that speed is more critical for playback than for
> rendering, to most users. Unless you have a really powerful machine,
> you need the "nearest neightbour" setting to get decent playback. But
> you most probably don't want "nearest neighbour" f
note that the make 3.81 from ubuntu do not compile cinelerra.
i had to downgrade the make to the 3.80.
anyway, cinelerra always compile perfect in slackware :-)
i'm preparing the packages and slackbuilds of cinelerra for slack 11.0.
bye,
rafael diniz
Em Quarta 04 Outubro 2006 10:26, Sylvain Jous
http://bugs.cinelerra.org/show_bug.cgi?id=332
--- Additional Comments From [EMAIL PROTECTED] 2006-10-04 23:54 ---
If you try the same project several times, can you get it to load with the
OpenGL driver?
I saw something similar, and thought it was OpenGL driver specific, but then
dis
http://bugs.cinelerra.org/show_bug.cgi?id=332
--- Additional Comments From [EMAIL PROTECTED] 2006-10-04 21:36 ---
Point of clarification: Cinelerra hangs, and then if I break out of the hang
using CTRL-C, the software outputs the above dump.
--- You are receiving this mail beca
http://bugs.cinelerra.org/show_bug.cgi?id=332
Summary: loading projects in OpenGL mode hangs cinelerra
Product: Cinelerra
Version: 2.1
Platform: PC
OS/Version: Linux
Status: NEW
Severity: normal
Priority: Medium
On Wed, Oct 04, 2006 at 02:18:55PM +0200, Marcin Kostur wrote:
> Dear Cinelerra Users,
>
> Since 2005 till now i thought that zoom/pan is for some reason unusable
> since no interpolation takes place which causes "blinking" etc...
> It took me over one year to understand that "scaling equation"
You are better than yoga.
:D Thanks!
Step -1: How will I get the source code?
Go to
http://cvs.cinelerra.org/
And click on "download", at the end you have "Source code". Detailed
instructions are at:
http://cvs.cinelerra.org/svnusage.php#anon
You will need subversion for this, which is a
On Wed, 04 Oct 2006 17:02:26 +0200, Miha Kitič <[EMAIL PROTECTED]>
wrote:
To compile a program from the source is not hard at all.
Like Alex wrote:
"Just give it a go. Start a console, go to the source directory and
type at the prompt ($):
$ ./configure
$ make
$ sudo make install"
But
Hi all who want to compile...
Recently I successfuly compaled a few programs on my own.
(not Cinelerra though)
So as a result of my success
I'd like to share a bit of my joy to those
who want to compile for the first time...
a kind of "Word to the wise..."
To compile a program from the source i
Ciao Sylvain
> Take care! You're true, only good people survived it... ;-)
I'll sit in front to the computer with a safety ring around my tummy... :-)
...Finger crossed!
Ciao
Raffaella
___
Cinelerra mailing list
Cinelerra@skolelinux.no
https://init.
Thanks Alex.
You are better than yoga.
> Just give it a go. Start a console, go to the source directory and
> type at the prompt ($):
> $ ./configure
> $ make
> $ sudo make install
>
> (After the last command it should ask you for the password.) It may
> ask you for some additional librarie
Hello!
I am tempted by 2.1. But at the moment I have a few
pending projects. Since 2.0 works well for me,
I decided to wait until I finish my work.
Then I want to give it a try. Maybe when I do that
I will try to compile it from sources because
I am being tempted to try and temper with it a bit.
Yikes! I didn't realize this either. If this is the case then what is
the best setting for rendering??
On 10/4/06, Herman Robak <[EMAIL PROTECTED]> wrote:
On Wed, 04 Oct 2006 14:18:55 +0200, Marcin Kostur
<[EMAIL PROTECTED]> wrote:
> Dear Cinelerra Users,
>
> Since 2005 till now i thought that
Ciao Raffaella,
> Are you trying to compile cinelerra from the sources?
At present I'm doing yoga to relax and convince me that *compiling*
shouldn't be so terrible if so many good people survived it! :-)
It is not so terrible :D It is just like using any other power tool
(like an electric dr
On Wed, 04 Oct 2006 12:29:38 +0200, Holger Levsen <[EMAIL PROTECTED]>
wrote:
A while ago cinelerra(-cvs) 2.1 has been released and I would like to
know if the issues described in this bug (see
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=331072) and
specifically the
licence-issues list
Salut Raffaella,
> At present I'm doing yoga to relax and convince me that *compiling*
> shouldn't be so terrible if so many good people survived it! :-)
> I'm pretty scared ...
Take care! You're true, only good people survived it... ;-)
Sylvain.
___
C
Ciao Miha
> Are you trying to compile cinelerra from the sources?
At present I'm doing yoga to relax and convince me that *compiling*
shouldn't be so terrible if so many good people survived it! :-)
I'm pretty scared but it's possible that I start soon to study how to
compile Cinelerra 2.1 CV from
On Wed, 04 Oct 2006 14:18:55 +0200, Marcin Kostur
<[EMAIL PROTECTED]> wrote:
Dear Cinelerra Users,
Since 2005 till now i thought that zoom/pan is for some reason unusable
since no interpolation takes place which causes "blinking" etc...
It took me over one year to understand that "scaling e
Thanks Nicolas.
> Perhaps there's no 2.1 CV Cinelerra available for Ubuntu right now. You
> will probably have to compile it yourself. Have another look at the
> message I posted in the latest thread you opened.
I think you are right.
I tried to study what *compile* means, but I had no good luck.
Y
Miha,
I'm having problems installing 2.1 CV on Ubuntu Dapper.
2.0 was much easier (it was not selectable on Synaptic though).
Are you not tempted by 2.1 CV?
Ciao
Raffaella
___
Cinelerra mailing list
Cinelerra@skolelinux.no
https://init.linpro.no/mail
Hi!
I am also new to ubuntu linux, but for me to install cinelerra
from Kiberpipa precompiled package was very easy. I had no
problem whatsoever... just selected it from Synaptic and it worked.
I wonder why it doesn't work for you...
How about do a clean install of Linux and try again
from synap
Dear Cinelerra Users,
Since 2005 till now i thought that zoom/pan is for some reason unusable
since no interpolation takes place which causes "blinking" etc...
It took me over one year to understand that "scaling equation" in Prefs.
menu is the KEY setting.
I set it initially on nearest neighbo
and the comunity source ainçt much better.. i tried downloading de intall cinelerra from kiberpipa and i get the following error:Los siguientes paquetes tienen dependencias incumplidas: cinelerra: Depende: libiec61883-0 pero no va a instalarse
Depende: liblame0 (>= 3.96.1-1) pero no
ok never mind my last post.. i made the directory but it gave string of errors ..but i these directoires do exist!! iec61883.h:23:32: error: libraw1394/raw1394.h: No such file or directoryIn file included from
cip.c:25:iec61883.h:115: error: syntax error before 'handle'iec61883.h:129: error: s
ok but where does this directory have to be?On 10/4/06, ga <[EMAIL PROTECTED]> wrote:
> help me, i am having the same problem.. i am also new to ubuntu linux and> have installed the cinelerra tz from heorinewarrior website... (i didn> know> that there was a n "offical" and a "community" version.)
Hi,
wow, almost exactly one year :-/
On Wednesday 05 October 2005 21:59, giskard wrote:
...
I was reminded of this issue when I saw that #156614 was closed (an RFP for
cinelerra).
A while ago cinelerra(-cvs) 2.1 has been released and I would like to know if
the issues described in this bug
> help me, i am having the same problem.. i am also new to ubuntu linux and
> have installed the cinelerra tz from heorinewarrior website... (i didn
> know
> that there was a n "offical" and a "community" version.) well i managed
So now that you know us, I guess you could try to compile "our"
help me, i am having the same problem.. i am also new to ubuntu linux and have installed the cinelerra tz from heorinewarrior website... (i didn know that there was a n "offical" and a "community" version.) well i managed to run a ./configure which finished correctly... but when i run the make i
29 matches
Mail list logo
