Can someone point me to a link where I can find the current list of know
host IP addresses that are infected by "code red"
Thanks.
_
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
h
Thanks for the help. I have the 1st edition. I believe you are talking
about, translated to 1st edition speak, Chapter 7 redundancy, Symmetry and
Load Balancing and pg 177-178 for the reg expression.
Thanks for the suggestion. I was actually trying to do just as you
suggested. I forgot 1 sim
On occasion I have been able to pick up old routers for free (not any Ciso
stuff unfortunately). Currently I have some Bay Networks and Ascom equipment
with both token-ring, sync serial and ethernet interfaces. Some of the
equipment is unsupported and some is just old.
While not relevant to Cisc
In my experience with Worldcom , you might have trouble choosing your own
DLCI numbers. You are likely to get assigned arbritrary numbers starting at
100+. I have found it helps to assign the subinterface the same as the DLCI
number, it really helps in troubleshooting when you do a show frame pv
Quick one - can someone confirm that the WIC-1DSU-T1 is the same for the
1700 as is for the 2600?
Most places I check out prices for specify only 1600, 1600 and 3600 - not a
word on 1700.
However, in the Cisco Products Quick Reference Guide it has the same part
number.
Thanks in advance,
Ole
In my experience with Worldcom , you might have trouble choosing your own
DLCI numbers. You are likely to get assigned arbritrary numbers starting at
100+. I have found it helps to assign the subinterface the same as the DLCI
number, it really helps in troubleshooting when you do a show frame pv
In my experience with Worldcom , you might have trouble choosing your own
DLCI numbers. You are likely to get assigned arbritrary numbers starting at
100+. I have found it helps to assign the subinterface the same as the DLCI
number, it really helps in troubleshooting when you do a show frame pv
It seems to me that a leading candidate for the above is a netopia r7200.
Anyone have experience with a Cisco product to solve the above hardware
need?
Brian "Sonic" Whalen
Success = Preparation + Opportunity
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16092&t=16092
-
Why not use a 1605 which has 2 ethernet interfaces works great?
Brian wrote:
>It seems to me that a leading candidate for the above is a netopia r7200.
>Anyone have experience with a Cisco product to solve the above hardware
>need?
>
>Brian "Sonic" Whalen
>Success = Preparation + Opportunity
Sure you don't want to just do a server upgrade? Sendmail and exchange,
and probably lots of others have been capable of smacking down non local
mail for awhile..
Brian "Sonic" Whalen
Success = Preparation + Opportunity
On Tue, 14 Aug 2001, Ryan Ngai Hon Kong wrote:
> Sorry this is a little b
any channce the link is getting so saturated keepalives cant get through??
Brian "Sonic" Whalen
Success = Preparation + Opportunity
On Tue, 14 Aug 2001, Jeff wrote:
> This problem has been driving me nuts and I do not know what to do. We
have
> a
> point to point t1 that keeps having excessiv
The question is, why on earth would you want to connect 2 switches in half
duplex mode, so much performance is being given up..
Brian "Sonic" Whalen
Success = Preparation + Opportunity
On Tue, 14 Aug 2001, Moe Tavakoli wrote:
> The command is "full-duplex"
>
> Also, you'll need to set your 354
hmm, dual ether as opposed to an sdsl router, not a bad idea, as long as I
accept their dsl bridge..
Brian "Sonic" Whalen
Success = Preparation + Opportunity
On Tue, 14 Aug 2001, Elijah Savage wrote:
> Why not use a 1605 which has 2 ethernet interfaces works great?
>
> Brian wrote:
>
> >It see
Hi. I've interchanged the WIC-1DSU-T1 between 2600's and 1700's before with
no problem.
Allen.
- Original Message -
From: "Ole Drews Jensen"
To:
Sent: Tuesday, August 14, 2001 2:59 PM
Subject: WIC-1DSU-T1 [7:16090]
> Quick one - can someone confirm that the WIC-1DSU-T1 is the same fo
""kaushalenders"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> hi,
> can any body can tell a good news group for unix and solaris
> thanxs
> kaushalender
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16099&t=15833
-
Hi guys,
I got a I/O-FE that doesn't get inserted or recognized after booting
up. Is there anyway to manually force it to insert once the router is
booted? Below is my show diag:
slut-hosting#show diag
Slot 0:
Fast-ethernet on C7200 I/O card with MII or RJ45 Port adapter, 1
port
Chuck, that's an excellent compilation of lab advice! I notice that most of
the esteemed contributors had common threads to offer, which I'll surely
heed when my time comes. Are you getting close to taking another stab at
the lab soon? I know I'd like to get a 4-digit number... ;-}
---
Rik Gu
Hi ,
Can any one help me find a switch that does
Server Load Balancing
12 - 16 100MB Ports
Thanks all
[EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16102&t=16102
--
FAQ, list archives, and subscription inf
The 24MB of memory have been set aside for IO Buffers. While 40MB has been
left for System Memory.
David C Prall [EMAIL PROTECTED] http://dcp.dcptech.com
- Original Message -
From: "Paulo Roque"
To:
Sent: Monday, August 13, 2001 5:29 PM
Subject: 7200 and Memory [7:15928]
> Hi All,
Can anybody give me a "heads up" on how to config a 1720 router 12.2T to
accept a VPN tunnel across the internet from a win 2k box?
Thanks,
xw
_
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Messag
Hi All,
I wonder if RIPv2 support load balancing? Does it choose path based on the
hop count only? Thanks All!!!
Thomas
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16105&t=16105
--
FAQ, list archives, and subscription inf
Hi All,
On my Cisco 3620 router, I have two different IOS images. One is on the
internal SIMM flash. The other is on the PCMCIA flash card. I would like
the router to boot the image from the PCMCIA card instead of the internal
flash. What command should I use? Thanks and sorry for the simple
There is some article on Cisco web site at show how to connect routers
back-to-back using the AUX ports. So I think you can apply this to your two
routers, unless you intent to use the AUX ports for something else.
Thomas
""Charles Ryan"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTE
Wondering if anyone can help...
Here is the scenario:
(untrusted - DMZ) WIN2K -> PIX --> (trusted - internal WIN2K)
I plan on setting up a Win2K IPSec tunnel between the two servers. Is there
anything special that needs to be configured on the Pix if it will only be
passing the traf
Conf t
boot system c2500-io-l.120-18.bin (image name)
or boot system slot x
Phil
- Original Message -
From: "Thomas N."
To:
Sent: Tuesday, August 14, 2001 10:36 PM
Subject: Boot IOS from PCMCIA card [7:16106]
> Hi All,
>
> On my Cisco 3620 router, I have two different IOS images. On
Try this link:
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis3600/hw_inst/hw_notes/pcmcia.htm#xtocid1243010
HTH,
Tom
"Thomas N." wrote:
> Hi All,
>
> On my Cisco 3620 router, I have two different IOS images. One is on the
> internal SIMM flash. The other is on the PCMCIA f
Hi Every one,
Having problem with running OSPF with ISDN.
The multicast Hello packets of ISDN continuously casuing line to
bounce.
Have tried by putting Ip ospf demand circuit on one/both sides of
connection but no succes.
Any idea???
Thanks for ur help.
Cheer..
CisoLover
_
Halo, could anyone give me some example configuration using firewall that
integrated with the router (software based).
Thank you.
_
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
ht
Thomas,
You've got a couple of choices.. you could move the IOS
image from the PCMCIA card to the physical Flash of the router and just boot
it as normal. The other choice is to add the command "boot system" and tell
it which IOS image to use...
HTH
Nigel .
- Original Messa
Thomas,
Yes... Yes.. I'll expand on my first "Yes" in
saying that the load balancing would be dependent on the model router and
what type of switching you were doing on the interface of the router.
HTH
Nigel..
- Original Message -
From: Thomas N.
To:
Sent: Tu
Jim,
I've not used a 1700 model router much but as long as the IOS
feature set is supported on this device(and
in checking it is) the configuration should be just about the same.
http://www.cisco.com/warp/public/707/2000.html
HTH
Nigel..
- Original Message -
From: Jim Jones
To
Thanks All!!!
Thomas
""Nigel Taylor"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Thomas,
> You've got a couple of choices.. you could move the IOS
> image from the PCMCIA card to the physical Flash of the router and just
boot
> it as normal. The other cho
John,
Yep Foundry, the other word for "Cisco" :-)
Nigel.
- Original Message -
From: John Brandis
To:
Sent: Tuesday, August 14, 2001 8:40 PM
Subject: Looking for a Cheap cisco load balancing switch [7:16102]
> Hi ,
>
> Can any one help me find a switch that does
>
>
hi,
how can i do protocol prioriyty base queing in cisco
thanx
kaushalender
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16118&t=16118
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Rep
Question about OSPF and LSA type 3 behavior. Doyle in Routing TCP/IP vol 1:
"When another router receives a Network Summary LSA from an ABR, it does
not run the SPF algorithm. Rather it simply adds the cost of the route to
the ABR and the cost included in the LSA. A route to the advertised
Joe,
Connect a Cisco 1912XL or 1924XL to one ethernet port on your router.
Set-up one sub-interface on the ethernet port for each customer. Enable ISL
on each sub-interface. CAR each sub-interface to the rate desired.
On the switch you'll need to set-up a VLAN for each customer and ISL
trunki
Here is my scenario:
My CAT6509 has 2 supervisor1 and 2 MSFC1. It runs HSRP in the Hyrid mode.
On this box, I also run EIGRP and NAT. Every VLANs on the first msfc card
have higher priority and therefore in active mode. VLANs on 2nd card have
lower priority and therefore should be in standby m
what ios release do i need for my 3600 router to support e1 r2 signaling?
i have an nmce1b module in my router..
thnx.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16122&t=16122
--
FAQ, list archives, and subscription info: h
Check out
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/qos_
c/qcprt2/qcdconmg.htm
Brian
- Original Message -
From: "kaushalenders"
To:
Sent: Tuesday, August 14, 2001 9:03 PM
Subject: queing [7:16118]
> hi,
> how can i do protocol prioriyty base queing i
Hello everyone.
I just purchased the Teltone ISDN simulator. I also purchased two Adran ACE
NT-1. The ACE NT-1 came with striaght through rj-45 cables. I took the
cables and connected one end to the Port 1 of the isdn simulator and the
other side of the rj 45 connector to the back of the AC
Congrats, George
I am a CCNA and studying for the Foundation exam as well. I am reading
Caslow's Book (2nd Ed), Doyle's Tcp/ip 2nd edition and Switching, Cisco
Press, ACRC book. Any suggestions are greatly appreciated in terms of
books, tests, etc. I am not looking for a braindump though. I us
Hi there,
I am a CCNA and studying for the Foundation Exam. I am reading Caslow's
book (2nd ED), Doyle's TCP/ip (2nd ED), CISCO Press for Switching, ACRC Book
and practice using CISCO Interactive Mentor.
Any suggestions would be appreciated. I am not looking for questions/answers
though. I just
Exclude OSPF from your interesting traffic.
E.g...
access-list 101 deny ospf any any
access-list 101 permit ip any any
dialer-list 1 protocol ip list 101
This will allow OSPF traffic to cross the link when the link is already up,
but will not allow OSPF to initiate dialup.
Of course, you wil
Cisco is working on the bug for only the per-packet option. This has been
seen on the 6-port CT3 cards only. The default, per-destination works
as it should...i.e. load balance. And it works fine..Just make sure
that the queueing option is set to FIFO, no ip route-cache, no ip
mroute-cache,
Yes, you very well can. That is infact the way it is used when you need
to load-balance a BGP session with 2 T-1's with your ISP.:-)
>From: "Charles Manafa" >Reply-To: "Charles Manafa" >To:
[EMAIL PROTECTED] >Subject: Re: Static routes [7:15851] >Date: Mon, 13
Aug 2001 08:33:43 -0400 > >Yes,
Hi ,
Could anyone let me know what is the difference between the certification
program of CQS and CCIP . I want to pursue the specialization track on Cisco
Security .
I believe that most of the tests are the similar in both of these
certifications , could anyone guide me or let me know wher
line con 0
logging synchronous
This will stop the console msgs. as you type.
The other one would be to log to a syslog server or better still to the
internal buffers. Check out the logging command on CCO:-)
>From: "ahmadbilal" >Reply-To: "ahmadbilal" >To: [EMAIL PROTECTED]
>Subject: Re
what are the configurations? have you checked CCO for some on demand
configuration examples?
I've just looked at a few things on the TAC pages. you should be able to
check them out even if you don't have a CCO account.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/ip_c
With due respect.to them...They are the worst!! Phim is absolutely
right when he mentions about their bidding practises on Ebay. Infact, I
had the sales rep literally yelling at me over the phone.God
forbid
>From: "PHIMHONGKONG" >Reply-To: "PHIMHONGKONG" >To: [EMAIL PROTECTED]
>Subjec
I've seen several posts recently asking for references on the config
register settings.
the following link to a spreadsheet originally prepared by Adam Quiggle may
be of interest.
http://home.nc.rr.com/quiggle/ConfigReg.xls
HTH
Chuck
Message Posted at:
http://www.groupstudy.com/form/read.p
I don't believe RIP will solve your problem, even though RIP metric is only
based on hop counts, any neighboring router will still "see" the 2 MSFC's
with the same hop count, causing the same situation.
I believe this is one of the rare cases when you "have" to manipulate the
metric EIGRP uses. If
101 - 151 of 151 matches
Mail list logo