Dear All,
I have two sites connected using Cisco 1760 routers,
In site A I have a control panel, this control panel has a serial
connection (RS-232) to enable it send a print file each 12 hour, Now in
site B, I'll have a serial printer to receive the Panel file and print
it out,
I need your help t
Hello everybody,
I have the Sybex CCNA Virtual Lab e-trainer,CCNA Ebook,CCNP,CCIE,CCDA,cisco
press EBook,& Cisco Etrainer PPTs,lots more.It retails but
I am very flexible and willing to trade if you need any of those items. Good
luck to everyone.Contact [EMAIL PROTECTED]
Sandip Banerjee
CCNP
Dear all,
I have a cisco 7200. 5 bvi interfaces (bvi1,bvi2...bvi5) are configured to
connect the clients. 2 E1 link to the internet. one of them(such as s0) is to
ISP1 and the other one(such as s1) is to ISP2. NAT is used on both s0 and s1.
the s0 runs ospf with isp1 and s1 use static route to isp2
Haven't done it for a while, when you do a transfer file in hyperterminal
you select send file and browse to the file you want to send, then open.
i.e. click transfer, followed by send file, browse to your file then ensure
xmodem is selected.
""jghkskgsjk ghsfghsdfhg"" wrote in message
news:2002
The location of the image should be defined on the hyperterminal.
Command "xmodem destination_file_name" tells router to listen to the request
from hyperterminal.
Paul
""jghkskgsjk ghsfghsdfhg"" wrote in message
news:200210190634.GAA22618@;groupstudy.com...
> Hi all,
>
>
> I have a question rega
Try checking the gateway IP address on both workstations
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=55940&t=55767
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and N
we use mrtg (a freely available network monitoring tool) for a multi-site
frame network. we don't own the routers or have legitimate password access
to them (our vendor provides as part of the service) so we had the vendor
set up an snmp community string (read only) and an access control list on
e
Hi all simple question. Is it possible to configure VPN on a router
connecting to the internet using PAT? Presumably it would need some static
mapping to enable the connections to be rooted to the router. has anyone
managed this any info is appreciated
thanks
Steven Greeno
Message Posted at:
h
Hi
will advanced MPLS & MPLS and VPN architectures are. enough to pass the MPLS
exam plse advice, i dont have the official courseware..
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=55937&t=53549
--
FAQ, list archives, and subscr
Hi,
Can any one post some Security CCIE Bootcamp locations in Europe,
because
until now i didn't find anything.
Thanks,
Regards,
Bruno Fernandes
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=55935&t=55935
--
FAQ, list archive
Dear All,
I have a Cat5k and about 15 Cat29xx .
All 29xx are connected to the Cat 5, the Cat 5 cpnnects to the Pix, Pix
Connects to the router.
There are no Vlans in place.
I would like to enable VTP Domain but I would like to know the best way to
go about thist.
Some of our 29xx are old some are
Hello Study Group.
Currently I have 3 differents BGP sesions establish with 3 differents
providers. Each provider announce me about 115400 prefixs. Yesterday I was
making traffic load balacing between then, using the prepend comand such
others days (this actions are doing often in order to use
I think people are afraid to be the first guinea pigs in this new
experiment.
""The Long and Winding Road"" wrote in
message news:200210181454.OAA26971@;groupstudy.com...
> this is the second consecutive morning where I have seen the entire week
of
> November 11 with lots of empty Lab seats.
>
>
I read about that...But if the output of the hash is link 1, what will
happen if link 1 is down?
Will the traffic be drop?
Thanx..
Sliver
- Original Message -
From: "MADMAN"
To: "Sliver"
Cc:
Sent: Saturday, October 19, 2002 1:41 AM
Subject: Re: One link in EtherChannel fail [7:55886]
Hi Paul,
Thanks. I scored a copy of GR-253 and think I found the relevant
sections.
Not surprisingly, there two requirements:
* switch initiation time (ie time to detect that a switch is to be
performed)
* switch completion time.
The detection time is required to be capped at 10 ms and the swi
Anyone interested in study group in and around LA, preferably with previous
lab experience preparing for the new lab. Others are welcomed as well. I've
been to a few and now I am preparing for the new one. Please reply to
[EMAIL PROTECTED] if interested.
Thanks
-
Goodday Ladies and Gents
I hope that I am able to ask this question on this group,
What are the job opportunities in Europe,Portugal for Cisco Certified
Engineers?
Is there a demand for them? If so please send in a word,
Thanks
S
_
1- Try to remove the prepending you did and see whether things will come
back to normal or not.
2- If it came back to normal condition then check the way you are
configuring this route-map and discuss it with your ISP to get more
feedback from him
The processor & memory readings you provided are
New Network:I have 6509 connected to (2) 3550 switches. Vlan 20 and Vlan 30
Existing Network:Customer has an existing network with 10 token ring subnets
and all connected to 7507routers and the Ethernet 1/0 is connected to 1st
Cat5000 (172.16.20.0 subnet, ServerFarm1) and Ethernet 1/1 connected to
I have an access Catalyst 3524 switch uplink trhough Fiber to backbone
Catalyst 6509 switch. The uplinks ports are LX-GBICs adaptors. The
distance I believe would be about 2200 feet. The link ports on 3524 and
6509 are green and in up/up mode. I can also see the devices in CDP
Neighbor commands
20 matches
Mail list logo
