Congrats..
- Original Message -
From: Lab Candidate
To: Chuck Church ; ;
Sent: Wednesday, February 13, 2002 11:03 AM
Subject: Re: Whew! CCIE 8776!
> Thousands of Congrats, Chuck!
>
> --- Chuck Church wrote:
> > All,
> >
> > I think the title says it all. Took the lab today at RTP
Please have a look in to the archieves. we have discussed it allot...
-Mamoor
- Original Message -
From: Ouellette, Tim
To:
Cc:
Sent: Wednesday, February 13, 2002 2:17 PM
Subject: Cisco mc3810
> hey all. I just bought an mc 3810. What's the going rate for one of these
> without
Can any one tell me if we can run the command "encapsulation ISL" on
ethernet port of 1750 router .
-Mamoor
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12024&t=12024
--
FAQ, list archives, and subscription info: http://www.g
I have extended my console port with the CAT5 roll over cable and it
extended to 10 meters i worked for months on this cable and now
last month two of my router console port is hang out ... Console screen
is frozen but it is excepting data from console port so i blindly place
a password on VT
Hi,
Can anyone tell me the difference b/w 4000 and 4500M.
The price for 4000 used is very low as compared to 4500M or 4700M. I
think there is no difference except of memory.
Please correct me
Thanks,
Mamoor
CNE CCIP
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12154&t=1215
I think ur cooling fan is not working properly or there is a problem with the
cooling
do ur 5000 gives u any messeges on the screen like over temp.
most prob it is because of cooling... try putting in a chilled room for test
-Mamoor
Arun wrote:
> hi
> we have catalyst 5000 in our organizatio
Brian,
U can use as under
the price are approx
2501$600 x 2
2502$450 or less
2503$800 or less
2521$900
two 1912EN switch $1000both
for heavy stuff like 5000 and voIP
5000 loaded sup1$2300
2620$1300
1750$900
voIP modules$700
This is the complete lab excep
Hi,
I have setup all my lab for my CCIE but i am in lack of ISDN lines or
emulator.
can anyone help me out what is the cheapest ISDN emulator.
have anyone worked on PCs based ISDN emulator i think that will be
not so much expensive...
i have some sites on net that give ISDN emulator bu
Guys,
There are some good news and some bad for the CCIE LAB exam .
Good News :
1- the lab is changing into one day lab (not to stress on 2 day hard
working)
2- the basic configuration like ip addressing and cabling are pre-installed
3- the best in all no reverse telneting (no need to practic
Hi,
I am working on a senerio where i have to connect two sites by POTS and
trigger a DDR when needed.
When i ping the other end the DDR initiates and LCP , CDPCP and IPCP are
open but when i start debug ip packet it says "encapsulation failed"
any help!!!
-Mamoor
Message Posted at:
http
Both the routers get connected but can't ping both side and says
"encapsualtion failed"
the config on both side for async port is
interface Async1
ip address 192.168.4.2 255.255.255.0
no ip directed-broadcast
encapsulation ppp
keepalive 10
dialer in-band
dialer wait-
for a DDR connection is the PPP authentication must.. can't we make a
connection with only "encapsulation ppp"
-Mamoor
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=13944&t=13944
--
FAQ, list archives, and subscription inf
Hi,
I have posted earlier about the DDR link...
My routers dials each other and LCP and IPCP comes up but not the NCP, and
encapsulation is failing when i try to ping.
any help
-Mamoor
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=13945&t=13945
Hi Mohamed ,
Yes ur right there is a certification and from that u can cover the topics
like ATM , MPLS , INTERNETWORKING , QoS , MULTICASTING etc.
and that certification is CCIP the new certifiacation from CISCO ..
This is one from u ...
u can check it on CISCO site.
or mail me fro details
I think ur missing the command CALLBACK ACCEPT ... its not INITIATE also
the computer should be configure to pick the call if its windows98 or up
then try configuring computer as DIALUP SERVER (found in dialup networking
icon )
Also try to configure the router first for the nessary things
Hi folks...
I have made a senerio in which my network 192.168.1.0 is reach
to me by 3 AS-PATH , and this entry (192.168.1.0) is also installed in my
IGP rouing table but i cant ping anyone on the 192.168.1.0. here is the SHOW
IP BGP
2521#sh ip bgp
BGP table version is 10, local router
Should we have to include the EBGP link in the NETWORK command or just the
IGP or IBGP links when we are in router mode.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=14954&t=14954
--
FAQ, list archives, and subscription info:
network command in BGP of 2501(2) for the
EBGP link then i ping . and it pings the 2501(5) router . i was
wondering if we have to give the network command for the EBGP links.
-Mamoor
"Ahmed Mamoor Amimi" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTEC
Hi Jon,
Congrats on clearing the LAB if u have any pointer to us then
please let us know.
by the way i am interested in ur 2502 router please send me a show version
and a pic if u got we can have a deal i am in MD
-Mamoor
"Jon Mendoza" wrote in message
[EMAIL PROTECTED]"
The problem is directly associated with the router's processor
try adding more RAM ... i thing the router is getting overloaded.
-Mamoor
"Tapas Das" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Here i am facing a vey strange problem.we r using 2520 cisco router with
> 11.
this is true CISCO gives u free marks for 300.
anyways i have also given the exam and got 803 marks and my ISIS was 45% but
got 100% in BGP .
wat next .. QoS / Multicasting is also live for beta, do u have any
softcopy notes on that. it will be great if u could
mail me... i want to giv
It means that any packet arriving at this interfae will be looped back.
its just like the ip 127.0.0.1 but this is for
ip enviro. this type of loopback is harware that is why u r seeing ur
self in CDP try issuing the NO LOOP
on the interface or similar i didnt remembered.
and be
Is 6500 the router SET base as those of 5000 series or the IOS like 1900 or
routers
I also agree that they will not put PIX in the exam . i think that rack
will contain PIX but we will not have
to config it it will be for other CCIE track.
-Mamoor
"Brian H. Jones" wrote in message
hi all ,
3 of my routers are not getting anything from its consoles ... here
is the detail below.
Problem:
Not getting any type of data from my 2501 router's console but con config
from AUX.
observation:
1- When I power up the router Its goes apparently normal through the
booting proces
Can u tell me where are u If ur in Karachi/PAkistan then u dreams come
true.
I and my friend is preparing for the CCIE lab and we r schedulled for 15 JAN
2002
-Mamoor
"ahmed adil" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I wanted to know what I need and should but fo
2509 was of worth for the old CCIE lab where u need it but now this
router is been replaced with
a KNOB SWITCH to get in to each router ... like the printer switch box used
to swtich printer b/w PC.
and for the CCNA/CCNP u really dont need to have it.. this router is
good but also expensiv
Hi,
I have 766 router brand new... i attach console and ethernet to it
and not the bri line... when i power up the
router its all lights on the front flashes and flashes and flashes and
nothing on the console .
I have read somewhere that the router should be sync with bri before
config
Hi,
Do we need AIM card with FXO or FXS to work with VoIP or we can just
install Voice card without
compression module will it work.
-Mamoor
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18779&t=18779
--
FAQ, list arch
Hi all,
I know this is a stupid question but u guys have to answer. I
have 2502 and a SMC MAU and want to connect
my 2502 with it but when i use a simple straigt cable to router and MAU
they both just tick and tick and router dont
get into the ring should i have to use other c
not true. u can go back and check ur answers...
"Baker, Jason" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Correction.
>
> Had a friend just do the CCIE written and you cannot mark questions and go
> back.
>
>
>
> > -Original Message-
> > From: EA Louie [SMTP:[EMAI
Hi,
I am looking for someone to sell me a motherboard for the 2502 router
without flash.
If someone have it then mail me for the deal to complete.
I am in MD
-Mamoor
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20599&t=20599
-
Just write REMOVE 1000 times and say REMOVE 2000 time for 2 days then i
think u can get rid of this quick sand.
-Mamoor
"steve Ademoye" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I WISH TO REMOVE MY NAME FROM THE MAIL LIST...THANK YOU.
Message Posted at:
http://www.grou
Hi,
U can find everything about CCSI over this cisco offical but
confidentinal site...
http://63.75.89.96/
-Mamoor
"The New Guy" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Greetings Group
>
> Can anyone direct me to a source of info regarding the CCSI (Cisco
Certified
>
33 matches
Mail list logo