It means that any packet arriving at this interfae will be looped back.....
its just like the ip 127.0.0.1 but this is for
ip enviro. .... this type of loopback is harware that is why u r seeing ur
self in CDP .... try issuing the NO LOOP
on the interface or similar .... i didnt remembered.
and becuase of this loopback u cant get connectivity to others.

-Mamoor

"Sim, CT (Chee Tong)"  wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I was informed that there is a loop in our interface, and it is not up.
> When I do a sh interface, I found it is up but there is a word (looped) as
> shown below.  What is the meaning???   What happen ??  When I show cdp
> neighbor, I see the cdp neighbor of the interface is the router itself??
> Why???
>
> sin03>sh int s1/0
> Serial1/0 is up, line protocol is up (looped)
>
> sin03>sh cdp nei
> Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
>                   S - Switch, H - Host, I - IGMP, r - Repeater
>
> Device ID        Local Intrfce     Holdtme    Capability  Platform  Port
ID
> sin03            Ser 1/0            136          R        c3660     Ser
1/0
> TYO02            Ser 1/1            154          R        1750      Ser 0
> HKG01            Ser 1/2            167          R        1750      Ser 0
> SYD02            Ser 2/1            157          R        1750      Ser 0
>
>
> ==================================================================
> De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
> is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
> onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
> de afzender direct te informeren door het bericht te retourneren.
> ==================================================================
> The information contained in this message may be confidential
> and is intended to be exclusively for the addressee. Should you
> receive this message unintentionally, please do not use the contents
> herein and notify the sender immediately by return e-mail.
>
>
> ==================================================================




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18054&t=18052
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to