Hi Daniel...
I am assuming IOS for a 2501-2525 platform
and you are looking for Enterprise image with IPSEC -
ENTERPRISE PLUS IPSEC 56 : 16 MB Flash and 8 MB RAM
I am running 12.1.X code on a 2501 and 2520 which needs : 16MB of flash -
16MB RAM.
-Brian E. Howard
At 12:09 PM 01/04/2001 -0800
Hi Tim,
FYI
Maybe you already know this, but anytime you make a change to the
syslog.conf file. You will need to restart or HUP the syslog daemon.
Also...I have seen Cisco documentation that you need 5 tabs between
local0.debug (5 Tabs) /var/log/cisco.log (not being a NMS guru - that
ma
Hi Charles,
I agree with Andy...check into the monthly rate of ISDN in your area, that
may be the best
way to go.
A few months ago, another engineer and I bought a ISDN simulator from ARCA
Technologies. We decided upon ARCA mainly due to the fact that they have a
2 port BRI
simulator with bui
Hi,
Here is a sample config.
Under the interface - you need the actual dialing number in the dialer map.
-Brian
rp-2503A#wr t
Building configuration...
Current configuration:
!
version 11.1
service udp-small-servers
service tcp-small-servers
!
hostname rp-2503A
!
enable secret 5 $1$EC8c$2sYB
Hi Charles,
The 5 is probably just an arbitrary number ..Were these IP addresses
assigned to you
by someone else ?
Nonot all network numbers end in 0.
Need to know the subnet masks in order to determine whether those addresses
are all on the same network.
-Brian
At 04:14 PM 01/15/200
CGMP and IGMP is switch dependent.
Brian
At 01:37 PM 01/17/2001 -0600, Ole Drews Jensen wrote:
>Currently reading about Multicast, which I have not any experience with yet.
>
>If you have a small simple LAN with 1 fileserver, 10 workstations and 1
>router to the Internet:
>
>
>INTERNET---[route
6 matches
Mail list logo
