.
HTH,
Brian McGahan, CCIE #8593
[EMAIL PROTECTED]
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-334-8987
Direct: 708-362-1418 (Outside the US and Canada)
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Friday, September 05, 2003 1
Kaiser,
Your primary interface is up, so your backup interface is in
standby mode. This is normal behavior. What are you trying to
accomplish?
HTH,
Brian McGahan, CCIE #8593
[EMAIL PROTECTED]
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-334-8987
Direct
chronization Driver
Turbo Flooding of UDP Datagrams
UDLR Tunnel ARP and IGMP Proxy
V.92 Modem on Hold
Voice over IP Q.SIG Network Transparency
X.25 on ISDN D-Channel
HTH,
Brian McGahan, CCIE #8593
[EMAIL PROTECTED]
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-3
ready performed.
HTH,
Brian McGahan, CCIE #8593
[EMAIL PROTECTED]
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-334-8987
Direct: 708-362-1418 (Outside the US and Canada)
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Steven A
Fred,
Yeah, I'm still using IOS 3.11, IOS for workgroups. I refuse to
upgrade.
Brian McGahan, CCIE #8593
[EMAIL PROTECTED]
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-334-8987
Direct: 708-362-1418 (Outside the US and Canada)
-Original Me
ched. If there is a preexisting entry in the MLS cache,
the layer 2 header is immediately rewritten without having to do a
routing lookup.
The optimization is that the routing lookup is skipped if it was
already previously performed, hence Multi-Layered Switching.
HTH,
Brian McGahan, CCIE #8
!!!
Brian McGahan, CCIE #8593
[EMAIL PROTECTED]
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-334-8987
Direct: 708-362-1418 (Outside the US and Canada)
**Please support GroupStudy by purchasing from the GroupStudy Store:
http://shop.groupstudy.com
FAQ, list archives
Jens,
Assuming this is legacy DDR, do you have a static layer 3 to
layer 2 resolution (dialer map) for the IP of the remote end? Post your
config if you're still having trouble.
HTH,
Brian McGahan, CCIE #8593
[EMAIL PROTECTED]
Internetwork Expert, Inc.
Jens,
Assuming this is legacy DDR, do you have a static layer 3 to
layer 2 resolution (dialer map) for the IP of the remote end? Post your
config if you're still having trouble.
HTH,
Brian McGahan, CCIE #8593
[EMAIL PROTECTED]
Internetwork Expert, Inc.
.!!!
Brian McGahan, CCIE #8593
[EMAIL PROTECTED]
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-334-8987
Direct: 708-362-1418 (Outside the US and Canada)
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=74702&
Jens,
Assuming this is legacy DDR, do you have a static layer 3 to layer 2
resolution (dialer map) for the IP of the remote end? Post your config if
you're still having trouble.
HTH,
Brian McGahan, CCIE #8593
[EMAIL PROTECTED]
Internetwork Expert, Inc.
bits | 8 intervals
= 1200 * 8 = 9600bps
1 interval | 1 second
As a side note, if you want no excess burst, you want the Be value to be
zero, not the same as the Bc value. The syntax should then read as
follows:
traffic-shape group 101 9600 1200 0
HTH
Brian McGahan, CCIE #8593
Director of Desig
telnet for
the lock and key authentication.
HTH
Brian McGahan, CCIE #8593
Director of Design and Implementation
[EMAIL PROTECTED]
CyscoExpert Corporation
Internetwork Consulting & Training
Voice: 847.674.3392
Fax: 847.674.2625
> -Original Message-
> From: John Tafasi [ma
like this:
line vty 0 3
autocommand access-enable host timeout 20
line vty 4
rotary 1
Now the router will listen on TCP 7001 for actual telnet traffic
to the CLI.
HTH
Brian McGahan, CCIE #8593
Director of Design and Implementation
[EMAIL PROTECTED]
CyscoExpert Corporation
Internetwork
for when you have a single physical interface, but
multiple destinations to dial. Rotary groups are for when you have
multiple physical interfaces, but one destination to dial.
HTH
Brian McGahan, CCIE #8593
Director of Design and Implementation
[EMAIL PROTECTED]
CyscoExpert Corporation
fully generate some stimulating discussion.
Enjoy.
Thanks,
Brian McGahan, CCIE #8593
Director of Design and Implementation
[EMAIL PROTECTED]
CyscoExpert Corporation
Internetwork Consulting & Training
http://www.cyscoexpert.com
Voice: 847.674.3392
Fax: 847.674.2625
P.S. 25% discount off of CC
16 matches
Mail list logo
