Since all x25 called addresses are known by the local router, you do not
have to put any route commands. Remove all. Then past to me the "sh x25
route" output.
Regards.
-Original Message-
From: [EMAIL PROTECTED] [mailto:nobody@;groupstudy.com]On Behalf Of
Osama Kamal
Sent: Sunday, October
this is a nother link.
http://www.cisco.com/warp/customer/474/pswdrec_2900xl.html
Regards,
Fathalla
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Mamoon Dawood
Sent: Tuesday, August 20, 2002 8:58 AM
To: [EMAIL PROTECTED]
Subject: Erasing a password from
you can refer to the following link
http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/c2900atm/29xlatm
1/atmicg01/pebicg_4.htm
Regards,
Fathalla
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Mamoon Dawood
Sent: Tuesday, August 20, 2002 8:58
I have used the bellow mentioned download link.
ftp://ftpeng.cisco.com/ipmulticast/training/index.html
Regards,
Fathalla
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Larry Letterman
Sent: Monday, August 19, 2002 9:51 PM
To: [EMAIL PROTECTED]
Subject:
I did it before one year, It was 54 questions over the WEB (35$ for a trial)
with 80% passing score and unlimitted answering time. I have heard that now
the answer time is limited.
Regards,
Fathalla
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Jay Dunn
you can use "show process" to check the router CPU utilization.
For SNMP traffic timeout you need to have a snifer to monitor the source and
destination ports and check the network status and what is the problem.
Regards,
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTE
Hi Mark,
If you don't mind can you please send me a copy of the same.
Regards,
Fathalla
Email: [EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Turpin, Mark
Sent: Wednesday, August 07, 2002 9:43 PM
To: [EMAIL PROTECTED]
Subject: RE: BSCI
I'd appreciate if you can send me a copy of the same.
Regards,
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Mark W. Odette II
Sent: Thursday, August 01, 2002 11:42 PM
To: [EMAIL PROTECTED]
Subject: RE: LANE Information [7:50420]
I'd like a copy of th
can you please paste a copy of your x25 debug?
Regards,
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Pooja Thakur
Sent: Friday, August 02, 2002 11:30 AM
To: [EMAIL PROTECTED]
Subject: X.25 switching on CISCO; Please help [7:50521]
Hello,
I have a te
Can you please past the part number of your GBIC module?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Irwan Hadi
Sent: Monday, July 15, 2002 7:30 AM
To: [EMAIL PROTECTED]
Subject: Re: Help me on my CCNA Design Project [7:48715]
On Sat, Jul 13, 2002
One of your routers should act as DTE end and the other should act as DCE
end. To accomplish this you need two cables and as an example you can use
one V35-MT (for DTE end) and one V35-FC (for DCE end).
___
Fathalla A. Fathalla
International Turnkey
11 matches
Mail list logo