Hi
I am having some performance problem with DLSW+. The peers are 2621 with
IOS Version 12.0(3)T3 and at the other end I have Cisco 2612 with version
11.3(9)T.
Our testing setup with obviously less load worked fine but when we moved to
production the sessions started dropping. I have checked c
RESOURCE FAILURE messages.
Thanks..
Fawad
From: "Qurashi, Iftikhar"
To: "'Fawad Alam'"
Subject: RE: [sc] DLSW+ Problem
Date: Mon, 30 Apr 2001 16:14:37 -0400
MIME-Version: 1.0
Received: from [159.231.69.23] by hotmail.com (3.2) with ESMTP id
MHotMailBCB7120E00784004314F9
DLSW+.
>From application point-of-view my user sees SNA communication and SNA SYSTEM
RESOURCE FAILURE messages.
Thanks..
Fawad
From: "Qurashi, Iftikhar"
To: "'Fawad Alam'"
Subject: RE: [sc] DLSW+ Problem
Date: Mon, 30 Apr 2001 16:14:37 -0400
MIME-Version: 1.0
lem or problems with DLSW+.
>From application point-of-view my user sees SNA communication and SNA SYSTEM
RESOURCE FAILURE messages.
Thanks..
Fawad
From: "Qurashi, Iftikhar"
To: "'Fawad Alam'"
Return-Receipt-To: "Qurashi, Iftikhar"
X-Mailer: Internet Mail S
I was configuring extended ACL on PIX firewall Ver 5.2.1 and started
observing that the access-list is not working properly. Later on I realized
that it is different from extended access list of the routers.
I couldn't get the philosophy behind that. Any comments!
___
In order to increase flash on my 2600 Router I ordered 16MB Kingston Flash.
I removed the original 8 MB flash and inserted this new 16MB flash and the
message I am getting is:
rommon 1 > boot
device does not contain a valid magic number
boot: cannot open "flash:"
boot: cannot determine first fil
We have a PIX failover bundle. Our Primary PIX failed and we powered it off.
Now we have another PIX and we have to connect it. What should be the
strategy so that no outage occurs. I think if we put the new PIX (without
any Config) to the Primary end of Failover cable it would be the Active an
We have a PIX failover bundle. Our Primary PIX failed and we powered it off.
Now we have another PIX and we have to connect it. What should be the
strategy so that no outage occurs. I think if we put the new PIX (without
any Config) to the Primary end of Failover cable it would be the Active and
w
8 matches
Mail list logo