P id SAA27812
GroupStudy Mailer; Fri, 8 Mar 2002 18:35:36 -0500
Received: (qmail 23992 invoked from network); 8 Mar 2002 23:36:55 -
Received: from pcd293153.netvigator.com (HELO Home) (203.218.83.153)
by imsmq08.netvigator.com with SMTP; 8 Mar 2002 23:36:55 -
From: "Francis"
To:
S
-Original Message-
From: Francis [mailto:[EMAIL PROTECTED]]
Sent: Saturday, March 09, 2002 7:29 PM
To: 'Francis'
Subject: RE: Please confirm (conf#b49ab9db80dee4b731ac905d9a2cfa1d)
[7:37713]
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On
-Original Message-
From: Francis [mailto:[EMAIL PROTECTED]]
Sent: Saturday, March 09, 2002 11:47 PM
To: '[EMAIL PROTECTED]'
Subject: RE: Please confirm (conf#b49ab9db80dee4b731ac905d9a2cfa1d)
[7:37713]
-Original Message-----
From: Francis [mailto:[EMAIL PROTECTED]]
Sent
P id SAA27812
GroupStudy Mailer; Fri, 8 Mar 2002 18:35:36 -0500
Received: (qmail 23992 invoked from network); 8 Mar 2002 23:36:55 -
Received: from pcd293153.netvigator.com (HELO Home) (203.218.83.153)
by imsmq08.netvigator.com with SMTP; 8 Mar 2002 23:36:55 -
From: "Francis"
To:
S
You are not NAT'ing the clients to the Domain Controller are you? I think
you are by the fact that the branch office shares 1 IP address.
Domain Logon can NOT be NAT'd while SMB/CIFS can be (ie map drives)
Francis Gibbons
Network Architect, CCSI, CCNP, CNE, MCSE
Global Knowledge Netwo
I have used a very similar config. In our case, we requested an additional
serial(/30) subnet from our ISP. We used that between the WAN router and the
Firewall-1. Then the firewall is the only thing translating.
Francis Arigo
>From: Jason Jin <[EMAIL PROTECTED]>
>Reply-To: Jason
Hi ,
Can anyone tell me which books to refer to for CCIE written I went
through the Cisco recomended reading list, is there any single Cisco Press
books for Routing & Switching CCIE like they have for CCNA and CCNP...
Ralph
Message Posted at:
http://www.groupstudy.com/form/read.php?f
Hi Guys
I currently building my home lab, so far I ve 7 2500s routers and 2 2820 and
1 2924C XL what I would like to find out is if I disconnects the fans will
it damage the routers or the switches, the reason is just to do with the
noise factor, when they or all switch on it very noisy.
--
Rega
Guys
I'm planning on migrate from windows to Linux but I cant seems to find a
software to use to get a console connection "some thing like Hyper terminal
or Secure CRT".
cheers
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=35035&t=35035
Thanks, will give this a try now.
""M.C. van den Bovenkamp"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Will Francis wrote:
>
> > I'm planning on migrate from windows to Linux but I cant seems to find a
> > software to use
Hello all, I am currently planning on earning my CQS in Security but don't
have the money to buy a PIX. I had heard from my CCNP instructor that there
are directions out there on turning a PC into one. If anyone has a link or
the info I'd greatly appreciate it.
Message Posted at:
http://www.grou
Drew Simonis wrote:
> Word on the CCIE Security list is that you require a PIX
> flash card, which sells for ~ $700 US. With that, you
> could easily buy a 501 or maybe even a used 506 on Ebay.
>
>
Thanks for the info, now to find the card and some more info on installing
the PIX IOS on the
Hello all been slowing learning my security prodedures and such and ran into
something at work.
ciscoTelnetTrap [1] tslineSesType.0.1 (Integer): telnet[2] tcpConnState:
port port 23 (Integer): finwait2
I've so far translated it as IP address1 is setting up a telnet session to
IP address 2. W
Hi Guys
I'm just in the process of building my home lab and I read quite a few
previous posting suggesting that one can use MZMAKER to compress enterprise
version of IOS 12.1 to run from a 2500 series router with 8mb flash and
16mb Dram.
I just tried this and my router just keep on rebooting it
d one without.
> > Looks like yours is one without so is using the first 2mB(ish) for IO.
> > So it actually only has 14336 Kbytes available RAM.
> >
> > As I said, guessing a little, so anyone feel free to jump in and
correct.
> >
> > Regards,
> >
> > Gaz
Hi Guys
I just tried all my 2500 series router and out of 7 only 1 works so for the
record you guys are correct with regards to these memory issues.
cheers
""Will Francis"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi Guys
>
> I'
I have three 2501 routers and a tftp server in one of the subnets that is
attached
to the e0 of one of the routers. "copy star tftp" works from the router that
the tftp
subnet is directly connected to, but the other two routers fail to connect.
Both of the routers that failed to connect can ping
In my experience, the Kingston memory works fine and is a LOT cheeper.
However, when you call TAC with a problem with your router, they sometimes
ask if you have cisco memory installed. If the answer is no, then
they usually won't help you until you take that memory out.
my two cents.
-Fr
7;touch' and 'chmod' to create the file first, then try uploading it.
Chris M.
- Original Message -
From: "Schmendrick Dawes" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, May 09, 2000 9:04 PM
Subject: Re: backing up to tftp se
It sound like you need to change routing protocols. RIPv2
only takes hop count into a account when determining the best
route.
I would use EIGRP, it takes bandwith,delay,LOAD, and reliablity
into account when creating it's route metric.
-Francis
-Original Message-
From: Alexan
er was
booting".
But the configuration command I put in are quite standard (actually I tftp'd
in from a backup file which is done under IOS 9.14). Judging from the place
where the error message popped up, can anyone shed some light if it
indicates a config error or something else?
P and
AppleTalk routing)
-francis
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Dollard Morgan
Sent: Thursday, May 25, 2000 5:17 AM
To: 'E. Carolina Arias S.'; Francis Lee
Cc: [EMAIL PROTECTED]
Subject: RE: [SYS-4-CONFIG_NEWER] qu
"show int s0" or whatever interface you want to monitor.
There are two lines that say something similar to:
5 minute input rate 216000 bits/sec, 27 packets/sec
5 minute output rate 45000 bits/sec, 24 packets/sec
There's your 5 minute snapshot.
Francis Arigo, MC
that, if I ever want to modify the configuration, as
soon as I "write mem", the config goes back to "version 12.0".. :-(
-francis
-Original Message-
From: Flem [mailto:[EMAIL PROTECTED]]
Sent: Friday, May 26, 2000 8:37 AM
To: [EMAIL PROTECTED]
Cc: [EMAIL
I've
seen something similar and the problem was that we had accidentally
put
clockrate statements on both routers instead of just
the DCE.
Other
than that, layer 1???. Has that cable tested good elsewhere?
-Francis
-Original Message-From: Richard Holland
[mailto:[
o route IP.
Thanks in advance for your assistance.
Francis Arigo, MCSE, CCNA
System Administrator
Classroom Connect
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report
helps,
Francis Arigo, MCSE, CCNA
System Administrator
Classroom Connect
-Original Message-
From: Mark [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, June 13, 2000 9:20 AM
To: [EMAIL PROTECTED]
Subject: Cisco 2611 T1/CSU/DSU Module
Hey we have a T1 CSU/DSU module connected to a dedicated T1 line
x27;m sure that Layer 4 switching is not limited to just web switching, but I
haven't seen it used for anything else. Does anyone else have any experience
with it?
Hope that helps with the concept,
Francis Arigo, MCSE, CCNA
System Administrator
Classroom Connect
-Original Message-
Fr
Hi Guys
I've got 7 2500 Series routers in my home lab but its just getting a bit too
noisey, if the fans are unplug will this affect the routers.
cheers
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=44571&t=44571
--
FAQ, list
Hello all I have 4 2524s I purchased. Each one has a 5n1 Serial and FT1/NT1
DSU/CSU card along with a BRI Card. I need help wiring the FT1/NT1s. I
looked for info this that is for a beginner but most of it is just wiring
diagrams with no explanation on how to do it. Any help would be appreciated.
Hi Guys
I'm currently looking at how secure are access-lists to act as a firewall.
Guy I'm having no luck at all finding a windows port scanner which is
similar to port scanners on Linux/Unix platform, for instance let say NMAP.
Come on windows guys, however we wont get in to a conversation abou
;
>
>
> - Original Message -
> From: "Will Francis"
> To:
> Sent: Saturday, September 08, 2001 6:50 PM
> Subject: Access-list and Port Scanner [7:19123]
>
>
> > Hi Guys
> >
> > I'm currently looking at how secure are access-lists to ac
Guys
I'm trying to configure an 2503 to do "IP ADDRESS NEGOTIATED", receive dhcp
ip address and do nat for my test lab at work. Guys I got a couple of IOS
c2500-is-l.120-9.bin and c2500-d-l.120-9.bin, which one will do the above.
Will
Message Posted at:
http://www.groupstudy.com/form/read.php?
Dave
Where is the helpful tool
cheers
""MADMAN"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Neither, you need the T train if you wish to run 12.0.
>
> here is a helpful tool for such questions:
>
>
>
> Dave
>
>
erface.
My IOS Ver is 11.0.
Any hint on how to o this shall be higly appreciated.
Francis
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
erface.
My IOS Ver is 11.0.
Any hint on how to do this shall be higly appreciated.
Francis
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
36 matches
Mail list logo