Books for Introduction to networking [7:66849]

Hi, Is there any good book for non-technical manager about intro to networking (or network 101)? I have tried to search around and come across two books. Cisco Networking Academy Program IT Essentials II: Network Operating Systems Companion Guide

please unsubscribe me

Thank you _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

OSPF authentication

I have the two statements on my routers: ip ospf message-digest-key 1 md5 cisco area 0 authentication message-digest It works on routers A and B, but does not work on routers C, D. So I wonder that anyone have known that there is some problem with some of the software that does not

Portable IP address

Anyone have heard of this term? I heard that anything smaller than 204.255.255.255 are portable and anything larger than 206.0.0.0 is non-portable. I was told that this is an industry standard between the several large ISP. (i.e. not the real "RFC" standard). Is that true? thanks

BRI interface

Hi, I have a Cisco 2503 and a Cisco 2522DC router. They both have BRI interface. However, how can I check out that whether they are U interface or S/T interface? The cisco web site just says that this is a BRI interface without specifying what kind it is. (Both routers are for Canada routers)

Re: Pass Written

Here is what I used for the written exam yesterday Doyle's book (too detail and too good for the written) Kennedy's LAN Switching book (also too detail and too good for written) Caslow book (ok, but too many editing error and too easy on the WAN, Routing Protocol sections) certification zone

Pass Written

I just past it this afternoon. not a hard test at all. the certification zone is much harder. How come I still can not receive any group mail for the last 1.5 weeks? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report

I have not received message since Dec 14.

Why? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Token Ring help needed

Hi, I sent an email last saturday asking for how to make the TR interface be up/up. I connect my token ring interface to MAU with just a straight through cable (and I am NOT connected to the Ring In or Ring Out) The MAU is IBDN (NORDX/CDT). that is all I can find about the MAU info. It is a

Spanning Tree Bridge Identifier

Why does it have the following if I have my bridge on my C2500 during the boot up process? and where is this MAC address from? -- Note: A random Spanning Tree Bridge Identifier

Token Ring Interface down/down

According to the Token Ring section of the certificateZone.com, there is no "no keepalive" equivalent. I need to connect to the MAU to get the interface be up/up. I have tried that and it does not work. I have set the "ring speed 16" already. does anyone know why? And what kind of cable to

CID Beta

Is the Boson Test #1 and the CID text itself still good for the CID beta test? anyone take it and notice big difference with the original CID3.0? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and

certificate zone

Anyone have experience with the certificate zone CCIE R/S written exam section? I have purchased that and wonder whether the level of difficulty compare to the real written exam thanks in advanced _ FAQ, list archives, and subscription info:

Lab exam

Any one know what to expect on the lab exam? for example, out of 100 points how many points are BGP? how many points are SNA or DLSw? how many points are IPX? how many points are OSPF? (is it still 20?) how many points are Catalyst? what equipment to expect? (according to the website below, there

console speed

Someone changed my router's console speed to something else. what can be done to fix it back to 9600? thanks _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL

Config register

I see it as 0xf921 and then i wonder why. (i just down loaded IOS image through xmodem.) then i want to change to 0x2102 but somehow it shows 0x3922. "Configuration register is 0xF921 (will be 0x3922 at next reload)" why? also, anyone knows how to change the speed of the console to 9600?

Boson Software's QID

In the Boson software, what is QID (located in the bottom right)? does it indicate any mark? I try to find a correlation between correctly answer question and high QID but it does not really work _ FAQ, list archives, and subscription info:

CID Test

I am planning to write the CID test. Which book, the Cisco Press CID book or the Top Down Network is more useful for passing the exam? and btw, which book is more useful for the CCIE written exam? and which one is actually more useful in real life? thanks in advanced

urgent help needed: rommon 1

The Cisco 3620 router boot up as the above prompt "rommon 1 " Is it because the IOS image is gone? or is it because I typed something at the boot up process and make it to be like this? In this prompt, How can I check what IOS image my router is having now? and how can I download IOS image,

xmodem software

Hi, In case I need to use xmodem to download IOS image to the router. what kind of xmodem software i need at my computer? And can I download this kind of image from anywhere? thanks in advanced _ FAQ, list archives, and subscription info:

BGP in CCIE Lab

How involve is the BGP in the CCIE Lab exam? Is the OSPF and BGP the two most important thing to learn in that lab exam (and also in the real world)? And if so, then the BGP course must be one of the most important course to take. Am I correct? _ FAQ, list

Appletalk EIGRP on NBMA

Hi in a star topology, two appletalk routers have pvc with the hub. they are all running appletalk eigrp and i have " no appletalk eigrp-splithorizon" at the hub interface. however, the two routers can not ping each other. Is there something like " ip ospf network point-to-multipoint" for

Very Basic Token Ring Question

In the lab, I have a token ring interface. It is not connected to anywhere. Is there a way like the Ethernet's "no keepalive" that can make the token ring interface to be "up up" instead of the current situation of "down down"? BTW, is there a similar thing for serial line?

Re: Very Basic Token Ring Question

I have tried and it does not work. Do I need to plug any wire to the Token Ring Hub? Brian wrote: On Sat, 28 Oct 2000, Hubert Pun wrote: In the lab, I have a token ring interface. It is not connected to anywhere. Is there a way like the Ethernet's "no keepalive" that

Re: Total number of CCNP's worldwide?

How accurate is the informaiton? What is the source of these info? Check this out BREAKDOWN BY THEATRE- Through July 2000 US/CAN EMEA Asia/Pac Americas Japan Total per Cert CCNA 51509 14209 15166 1040 8153 90077 CCNP 4131 1954 1076 95 249 7505

IOS Version

I have a Cisco 3620 with cisco 3620 (R4700) processor (revision 0x81) with 18432K/6144K bytes of memory. and DRAM configuration is 32 bits wide with parity disabled. 29K bytes of non-volatile configuration memory. 4096K bytes of processor board System flash (Read/Write) I need to do a lab

IPX snapshot

when I am doing IPX snapshot for IPX/RIP, (I don't want the RIP and SAP to activate the link), can I have access-list 900 permit any dialer-list 1 protocol ipx list 900 as the dialer list? and I did not have the following configuartion. ipx watchdog-spoof ipx spx-spoof?? Somehow I can't get

CID

For those of you that wrote this test, is there any scenerio type question (like CCDA exam)? and how much would the CID help for preparing the CCIE written exam? thanks in advanced _ FAQ, list archives, and subscription info:

Re: Goal to CCIE by Self-Study

If you find that Doyle's TCP/IP books has lots of error, wait till you visit CCIE All-in-one Lab study guide and the Caslow's Cisco Bridging/Routing/Switching book, then you would appreciate that Cisco Press, in comparison, has less error. On 5 Oct 2000 06:38:36 -0400, [EMAIL PROTECTED]

Practise Exam for CID

Is there any practise exam for CID? **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription

snapshot routing

Can snapshot routing be done on dialer profile instead of the BRI physical interface? **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines:

Re: Questions re Doyle ch. 3

See comments below Bradley J. Wilson wrote: Couple of questions from the exercises at the end of Chapter 3 of Doyle's TCP/IP book:1) Configuration problem #2: the answer to RTC lists six static routes. Aren't the 5th and 6th entries already covered in the 2nd entry? My answer key only have

Re: Multiple default gateways, same result?

If you specify the next hop IP address, then the static route would have admin distance = 1 (so the "1" at the end of your config is redundant) If you specify the out-going interface, then it would show up as connected in routing table. There is no point to put the "ip route 10.48.2.0

CID

How good is the Global knowledge's CID course? Anyone have attend that? And compare to CIT course, which one should I attend? Thanks **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED

Re: BOOKS FOR CCIE WRITTEN

CCIE Professional Development, Routing TCP/IP Vol 1 (Doyle, Cisco Press) Cisco CCIE Fundamentals: Network Design and Case Studies (Cisco Press) OSPF Network Design Solutions (Thomas, Cisco Press) Internet Routing Architectures (Halabi, Cisco Press) **NOTE: New CCNA/CCDA List has been

RAM

In the show version below, what is the RAM and Flash? Is it 18M and 6M? or is it 24M and 6M? I need to have IPX running with the capable of ISDN dial backup for this 3620 router. I try to download IOS image from Cisco so I need to know whether I have enough or not. Thanks in advanced bmw

Re: CCIEBootCamp Labs

One more questions about bootcamp: And what is the difficulty level for bootcamp compare to the Lab exam? is it harder and tricker? **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED

access list command

Hi what does the "access-list 100 permit ip host 0.0.0.0 host 0.0.0.0" applied to an interface do? Is it only permitting the default route going through ? Thanks in advanced Hubert **NOTE: New CCNA/CCDA List has been formed. For more information go to

Re: Book Reviews

me too!!! Ariel Banzon wrote: Great idea. I can certainly use and contribute to this. **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines:

access list command

Hi what does the "access-list 100 permit ip host 0.0.0.0 host 0.0.0.0" applied to an interface do? Is it only permitting the default route going through ? Thanks in advanced Hubert **NOTE: New CCNA/CCDA List has been formed. For more information go to

ip classless

What does this command do? thanks in advance **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and

BGP Loopback Update-source

Hi, I am using the two loopback as the update sources between two BGP external peers. And I also have a OSPF running so that the routing table for both router realize the other router's loopback Router 1: router bgp 2 neighbor 10.44.1.1 remote-as 1 neighbor 10.44.1.1 update-source Loopback1

Re: BGP Loopback Update-source

Regarding about my BGP update source problem, I get suggestion that I need to use the ebgp-multihop. However, if I just use loopback on one side and direct neighbor on the other side, it works perfectly without the multihop statement. Why do I need that statement if I am using loopback on both

Re: IPX RIP Updates

IPX RIP update is 60sec ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

CCO

I just want to confirm that spending time with the Cisco CD is the most important thing in pursuing for CCIE. (I know that in the Lab exam, I will be given a Cisco CD) Would that be more important than reading books (e.g. Doyles, Caslow, BGP)? I am not saying that I will not spend time in

Routing Table

How does the Routing table being organized? Using the same network diagram but with different set of routers, the order of the routing table changes. Is there a particular way to order the "show ip route" routing table? (For example, for "show ip bgp", the bgp table is ordered from small

Internet Routing Architecture II Book

Anyone has read this book? How does it compare to the first version? does it worth the money to buy? ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct

Re: CCIE Written exam material

Do they have any relation with the CCxx Production (for the CCDA material)? Jon wrote: They are using a hosting company for their website, Hotmail for e-mail, and tell you more about PayPal than themselves... Hmmm! If they are still around in a few months, I'd say go for it. Jon

CCDP

Is the Caslow book a good resource for the CID exam? I have my CCNP and plan to read the Caslow book for the CID exam. What sections that I am not able to answer? Thanks Hubert ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list

global knowledge NETGUN Program

Anyone has take that? and how about the Advanced CCIE Preparation Program (ACPP)? Anyone take that? ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct

Problem in Install Cisco CD

I get the Apr 2000 version. I am using Window98 and use the procedurefrom Windows 95/NT4 (there is no installation instruction for Win 98). However, when I tried to click to the "Launch CD", I get the following message. Why? Proxy denies fulfilling the request The proxy's access control

Re: Another New CCIE Book

How do you find this book? Worth buying? Kevin Wigle wrote: Th CCIE Exam Cram won't be around for a few weeks I'm told but I found this book on the shelf. PREP KIT CCIE 350-001 Routing and Switching Published by BaerWolf and QUE ISBN: 078972359 It looks like no matter what our

Working hour

What is the normal working hour per week in each country? and what is the normal working hour per week for NETWORK ENGINEER have to work per week? I just want to know roughtly what to expect Thanks Hubert ___ UPDATED Posting Guidelines:

Re: Encapsulation ISL on Ethernet??

I can't do it either. i guess that it depends on your router's port. 100Mbps. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure

Support 2.0

Any one take this exam? how is it different from the CIT4.0 exam? Thanx in advance ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure

CCIE Lab Study Guide

There are many errors in the All-in-One CCIE Lab Study Guide. is there an "errata" or something like that to note what are wrong in the book? thanks in advance ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and

Live Cisco VPN TechTalk--6/14/2000

Anyone been to this talk and get the free rearview mirror successfully? ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations

Re: what is the meaning of the command

This does not make sense because the mask is wrong. ip unnumbered means that using, let say, E0's ip address on S0 in order to save ip address space. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription

Re: Cisco for Woman?

I am in Canada and I don't feel the same situation. Female interviewed me for my job, and I take courses with female. So I think that it is pretty fair. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and

Re: CCIE ExamCram

What is Checkpoint? ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Percentage to success

Is it correct to say about the following: CCNA is 10% to CCIE CCNP is 50% to CCIE? What I am looking at, is how far am I from CCIE when I obtain the CCNA and CCNP. I know that you can't get an exact answer. But I am just looking for the time (in proportion) that I need to put to each

Re: Why does anybody make the CCNA

Because CCIE is tooo hard to get in comparison to CCNA ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL

Re: PIM

Use sparse mode if the devices that are being multicasted are distributed sparsely. Use dense mode otherwise. Sparse mode have more overhead than dense mode. it is designed for sparsely distributed multicasted device ___ UPDATED Posting Guidelines:

erase flash

is that possible to erase one (out of two) file(IOS image) in flash? ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to

Re: EIGRP Feasible Successor

for variance of 2, use "variance 2" ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]