RE: More about Linux VS. Cisco [7:66811]

I agree also that the best mix to have is definitly Cisco expertise and Linux/Unix expertise ebcuase they realy go hand in hand in an enterprise environment. I know yahoo runs their e-mail on sendmail servers so unix and linux is very widly used. In some cases it's much easier then microsoft too

RE: route-maps from one neighbor [7:66371]

what i was going for was to simulate an isp . so i was trying to inject more as's into the path Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=66594&t=66371 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/li

BGP can't find origin [7:66571]

when you see this message does this mean there is a router loop or that BGP just can't find the origin? Is this command going to affect routing in anyway? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=66571&t=66571 -- FAQ, list a

route-maps from one neighbor [7:66371]

I have a question about route maps. For example i'am peering between two different AS. On the left there is AS 200 and on the right AS 1. AS 200 is sending a bunch of EBGP routes to AS 1. Two routes for example 192.168.1.0 and 192.168.2.0 are coming into AS 1 and the edge router wants to prepen

Re: tftp to flash timeout [7:64226]

whoopppsss Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=64238&t=64226 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTEC

RE: tftp to flash timeout [7:64226]

actually i don't think i have enough ram Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=64231&t=64226 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure viola

tftp to flash timeout [7:64226]

Copyright (c) 1986-1995 by cisco Systems, Inc. Compiled Wed 01-Nov-95 15:04 by vatran Image text-base: 0x600087E0, data-base: 0x60248000 ROM: System Bootstrap, Version 5.2(7b) [mkamson 7b], RELEASE SOFTWARE (fc1) Router uptime is 33 minutes System restarted by power-on Running default software c

ISIS problem in 12.2?? [7:63824]

why can't i use the router isis command in 12.2? it won't let me into the ISIS sub menu. In 12.1 I can get in just fine. whats up? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63824&t=63824 -- FAQ, list archives, and subscripti

new access list problem [7:63715]

Hello i networks 192.17.73.0 - 192.17.77.0 is there anyway to deny these networks with one entry in an access list? such as deny 192.17.73.0 0.0.248.255? is this going to deny these networks? it's also going to black hole several other networks though. Or does the list have to be deny 192.17

RE: Access List help!! [7:63644]

it worked!! thanks!Jason Steig wrote: > > so your saying that my statement > ip access-list 1 permit ip 192.17.73.0 0.191.251.0 will permit > all hosts from network 192.17.73.0 and 192.81.73.0?? > > 17 is 00010001 > 81 is 01010001 > > so the bit it doesn&#x

RE: Access List help!! [7:63644]

so your saying that my statement ip access-list 1 permit ip 192.17.73.0 0.191.251.0 will permit all hosts from network 192.17.73.0 and 192.81.73.0?? 17 is 00010001 81 is 01010001 so the bit it doesn't match on is the 64 bit. so i just have to switch it around if your saying the ones don't coun

Access List help!! [7:63644]

Hello all. I'am stumped on an access-list that i need to create. What i did was i set up two routers using rip and put loopbacks on one of them and advertised them in rip. I then attempted to build an access-list allowing just these networks to pass into the other router. The router with the loopba

access-lists [7:63520]

Hello all. I'am stumped on an access-list that i need to create. What i did was i set up two routers using rip and put loopbacks on one of them and advertised them in rip. I then attempted to build an access-list allowing just these networks to pass into the other router. The router with the loopba

Access-List questions [7:63399]

Hello all. I'am stumped on an access-list that i need to create. What i did was i set up two routers using rip and put loopbacks on one of them and advertised them in rip. I then attempted to build an access-list allowing just these networks to pass into the other router. The router with the lo

Setting Privilege Levels for Users [7:63073]

I'am working on a Boson's CCIE lab with a friend and we are working on setting up privilege levels for users who need to telnet to the router. User1 needs to have access to just the user level commands nothing more. User2 needs access to all the commands that user 1 has access to as well as about

RE: Telnet to 2501 through a linksys router [7:62654]

ahh i see i did not specify the gefault gatway command on my cisco 2501 for the linksys. all i did was make the external port for my sun box 2323 and for my cisco 23 to activate the port forwarding from my linksys over my NAT internally to my 2511 router. Actually mine is also a 2511. Sorry whoop

RE: question [7:62655]

cause he is the moderator. he's moderating Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=62657&t=62655 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure vio

Telnet to 2501 through a linksys router [7:62654]

Here is my dilema maybe someone can help me. I have a linksys router and then internaly i have my cisco lab. I did port forwarding on the linksys and told it to forward all telnet requests internaly to my router which i want to use as the entry into my lab. The problem is I can't connect and I'a