Lawlessly!!
On 22 Nov 2000 13:05:55 -0500, [EMAIL PROTECTED] ("Bob Perez")
wrote:
>Does anyone have any Exam prep tests that they would like to exchange for?
>I would like the BSCN from Beachfront quizzer if possible. I have BSCN and
>BCMSN from Mcse2be.com, and would like to exchange
n list and start a new one? Please help me out...
thanks,
Jimmy.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=40228&t=40228
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Rep
0618
username test privilege 2 password 7 021201481F
ip subnet-zero
no ip domain-lookup
privilege exec level 2 show running-config
privilege exec level 2 show
And the result is as below :
Building configuration...
Current configuration:
!
!
!
!
end
IN
Jun 10 20:39:14: AAA/AUTHEN/START (0): using "default"
list
Jun 10 20:39:14: AAA/AUTHEN/START (440731952):
Method=TACACS+
Jun 10 20:39:14: AAA/AUTHEN (440731952): status =
ERROR
Does anyone has any idea ?
regards
Jimmy
_
I heard that it is possible to study for CCNP using the resources at
cisco.com with CCO account. May i have the URL?
What other advantages does the CCO account have other than troubleshooting
and TAC cases?
Cheers!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=55658&t=55658
Hi,
Heard that i can find online book and training guide on the certification
with CCO account. Can someone give me the URL for that. I am going for my
CCNP. Other than that and troubleshooting, what other uses can i gain from
CCO account.
Cheers !
Message Posted at:
http://www.groupstudy.com
Hi,
I have look up thing on Optical stuffs but i cannot find the explanation of
passive optical switch and active optical switch? Can someone explain them
to me? If possible, give me the URL! I heard that for passive optical
switch - it is O-O-O but for active optical switch - it is O-E-O. How do w
Hi,
I am confused by the CCNP exam certification guide (Cisco Press). It
mentioned that a switch in the Distribution layer would make a better Root
Bridge choice than one in Access layer. I thought for distribution switch is
of layer 3 so STP is not necessary for it unless it is a flat switched
net
Hi,
Sorry if the following question sound stupid to you. let say i have 4 nodes.
B
/ \
AC
\ /
D
If BLSR is employed, how do i know in which direction is the packet flow
from A to C. Should it flow through B or D? What is the criteria for
choosing the path?
For BLSR/2, since it
delay,
BW, etc?
Cheers !
""s vermill"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Jimmy wrote:
> >
> > Hi,
> > Sorry if the following question sound stupid to you. let say i
> > have 4 nodes.
> >
> > B
>
If you will given a choice, would you choose to go for PhD in networking
area or juz stay in your field and pursuing profession certification such as
CCNP/CCDP etc. Assume that both is fully sponsored, can anyone tell me which
one will paid off in a long run?
Cheers!
Message Posted at:
http://
Hi,
I have lot of CCNP and CCDP stuff for sale. Exam guide, cram sheet etc.
Please let me know if you are interested in buying.
Thank for your attention.
Cheers!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=60410&t=60410
--
FA
Does anyone have the sample configuration for
Time-Base ISDN connection.
What I want to do is the only specific time , like
from 9am to 6pm , ISDN link bettwen 2 router will be
up.
Thanks in advance.
regards
Jimmy
__
Do You Yahoo
Just wonder can I convert serial port on cisco 2501
to ISDN port. If yes , how should I do that and what
other equipemnt is needed ? I can't find any cisco
documents from Cisco page.
thanks in advance.
regards
Jimmy
__
Do You Yahoo!?
Hi all :
Does anyone know whether IOS 11.1(2) support "show
tech" command ? I have a 2501 router running on
11.1(2) and it does not has "show tech ". However
another 2501 router running on 11.0(22) and it has
"show tech" command.
Th
?
Cheers,
Jimmy
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=53470&t=53470
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
switch/router at the middle for interconnect.
Cheers,
Jimmy
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=54023&t=54023
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report mi
Let say if i use a 100Mbps switch for 300 user for each floor. Will it be
very slow? How do i really calculate the BW for each user. Doing an
approximation? 100M/300 ?
Cheers,
Jimmy
""Jimmy"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> If
m are you going to use for 300 users...
> 6500 ?
> 4006 ?
> or multiple stackables ?
>
> Jimmy wrote:
>
> >Let say if i use a 100Mbps switch for 300 user for each floor. Will it be
> >very slow? How do i really calculate the BW for each user. Doing an
> >approximatio
-20 each.Or a 10Mbps switch will be more than
sufficient for it.
Can i calculate the BW for each user in this manner:
100M / 300 (no of user)
Assuming full usage.
Let say i have around 3 storey of about 300 users each, The backbone switch
should be 10x the BW of each floor rite?
Cheers,
Jimmy
Hi,
Just want to clarify something. Let say i have middle-size network which all
the switches (around 4) connected together to a router. The backbone of the
network should be the toward the WAN side which is from the router onsward
rite? Or is it the connection from the switch to the router?
Sw
If it is connected to another network, then it is a backbone between the two
network rite? Else if it is connect to the Internet, there will not be any
backbone in the network? Rite? Correct me if wrong. Sorry, me new in this
line. So have to seek advice from you all.
Cheers,
Jimmy
""
How is the simulation question? Easy? How many simulation question
altogether?
""Amir Tahir"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> HI,
> I used Cisco certification guid, Sybex exam notes and amother book named "
> Remote access for cisco networks by bill burton. exam w
Hi,
Can you give me the URL for the book.
Cheers!
""Michael Greenbaum"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I know that for myself, anything that changed from the older Cisco Press
> books were able to be found on CCO. I used CCO for studying for the CIT.
> I found t
Hello Guys / Ladies,
I am trying to get reverse telnet configured on a 2511. I have 7 other
routers connected via an asyn scsi cable. all seems to be well but still can
not get it going. can not telnet to other router via the access server. If
anyone has quick and dirty notes on this configurat
error in it let me know...
Thanks All
Jimmy L. HalbertCurrent configuration:
!
version 11.3
no service password-encryption
!
hostname Access_Router
!
enable secret 5 $1$3s/V$Y84ec8t4.b9HNu2YUvwH/.
enable password cisco
!
ip host Access_Router 2001 192.168.1.1
ip host r25001 2002 192.168.1.1
ip host
access router. Take a look
and see if I am doing is ok...what am I missing that is keeping me from
being able to telnet back to the access router
Thanks All
Jimmy L. Halbert
Current configuration:
!
version 11.3
no service password-encryption
!
hostname Access_Router
!
enable secret 5 $1$3s/V
Does anyon know of a good source for information on vlan configuration on
IOS based switches. It seems that most books only talk about set based
switches. My switches are IOS based...
thanks
_
Get your FREE download of MSN Exp
Here is a Brain teaser
In Network Address Translation (NAT), one ip address has to be
substituted with another. When this happens, the ip-layer
checksum must be recalculated. What is the quickest way possible
to do this operation, and give your own flavour of pseudo (or real
if you want) code to
Does any one know if there is a telco simulator software program out there
anywhere. I need to simulate a dailup from one laptop to another.
_
Get your FREE download of MSN Explorer at http://explorer.msn.com
Message Posted at:
h
I have two 7513 each loaded with extras for sale and a 4500. Will take the
best offer before sticking it on ebay.
_
Get your FREE download of MSN Explorer at http://explorer.msn.com
Message Posted at:
http://www.groupstudy.com/fo
Hello Guy/Ladies
Listed nelow is some equipment I am trying to get rid of. Has been in a lab.
In fairly good condition. I will provide serial cables with the equipment
approximately 8-10 and pay shipping.
7513 A
cisco RP1 (68040) processor (revision A0) with 16384K bytes of memory.
Processor bo
, BFE and GOSIP compliant.
2 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
128K bytes of non-volatile configuration memory.
4096K bytes of processor board System flash (Read/Write)
Jimmy
_
Join the worlds largest e-mail
I have the following inquiries and need some advise :
1) Does CiscoView supports voice port ?
2) How many devices can CiscoView supports ?
3) Can CiscoView support non-Cisco product ?
Can HP OpenView performs all task that CiscoView do ?
thanks in advance.
regards
Jimmy
Hi all :
Can anyone enlighten me whether I can create sub-interface on Ethernet
or FastEthernet.
thanks in advance
regards
Jimmy
_
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message
.
Some people told me that we can only create sub-interface on FastEthernet
and NOT Ethernet ( 10Base ). Is it true ? What is the minimum IOS version
should I use ?
cheers
Jimmy
>From: "Jeff Smith"
>To: [EMAIL PROTECTED], [EMAIL PROTECTED]
>Subject: Re: sub-inter
> >182. Teri Mash, Waukee, IA
>>> >> >183. Thomas Mash, Waukee, IA
>>> >> >184. Colleen McClaflin, Des Moines, IA
>>> >> >185. James McClaflin, Des Moines, IA
>>> >> >186. Kim Sanford, Des Moines, IA
>>> >
Is there anything special that is required to get hyperterminal to work with
2000 professional
_
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
http://www.groupstudy.com/form/
I am trying to get hyperminal to work wih 2000 Professionalno such
luck
_
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=24175&
A service SAP received without a route to that service is
A. Put on hold until the route is learned
B. Ignored
C. Installed in the SAP table
D. Forward to the Designate Router
/J
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.ht
Look at VPDN. I had the same problem and eventually solved it by bringing
in the Win2000 clients using M$ pptp/mschap/mppe. You will have to
authenticate to a Radius server that understands mschap/mppe-keys
(i.e. M$'s -- see NT 4.0 Option pack or W2k Server). I know it's only
40-bit, but hey, it
41 matches
Mail list logo
