Does anyone know what are the ports to enable IPSEC traffic between two
points when I have configured access-lists on the interfaces?
I am getting that problem and I have found just few documents about it.
I know that I have to permit IP, UDP and TCP. Is there other protocols to
permit?
Please a
correct to traffic from internet, but not from the
VPN).
Does anybody know how to solve that weird problem
Which ports do I have to open to allow VPN and Internet access using
together an access-list?
My best regards to everybody!
Leonardo Borda
Systems Engineer
Brazil
Message Posted at
successfull as much inbound as outbound?
I had success in configuring internet access and it4s working fine but
over IPSEC my users from the other side of VPN can not access my exchange
server using VPN. but they can ping it...
thanks.
Leonardo Borda.
Message Posted at:
http
I am having problems to configure the following scenery. Please
suggestions will be very appreciated. :)
LAN: 192.168.25.0
I0: 192.168.25.96
I1: 172.16.1.1
E0/0: 172.16.1.2
S0/0: 200.176.x.y (Valid Internet Address)
LAN>I0(Windows 2000)I1>E0/0(Cisco1600 using NAT)S0/0-> Internet
eq www
Leonardo Borda MCSE, MCP+I, MCT
Brazil
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=14555&t=14555
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report mis
Hi!
The "isdn answer1 [called-party-number][:subaddress]" command must be
configured where? at the calling router or the called router. I mean, let4s
say that I want to connect to other ISDN party. Do I need to configure this
in my router or at the router called?
thanks!
Leon
Does anyone know how many CCIE exist around the world?
Does cisco publish that information?
Leonardo Borda
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=13545&t=13545
--
FAQ, list archives, and subscription in
And what4s the news server?
thanks!
""no mail"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Don't know why it didn't stick last time.
>
> comp.dcom.sys.cisco
>
>
> ""john"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Hello,
> > I'm in the wron
Hello.
I4m studying to pass in the CCNA exam too and I really believe that
courses are not very good, because it is a little superficial in all
subjects. I personally prefer to get a cisco book, study it and practice at
work and doing prep tests...
If you like to share some information an
Does anybody already have that message in your routers?
5w5d: %AMDP2_FE-5-EXCESSCOLL: Ethernet0/0 TDR=9, TRC=0
It4s strange because I have a Cisco 2600 and I have no many workstations
connected to it...
If anybody had the same problem and found an answer please
Thanks!
Message Posted at
do?
>
> ip nat pool BRASIL x.x.x.x x.x.x.x netmask 255.255.255.192
> ip nat inside source list 10 pool BRASIL overload
>
> ip nat inside source static 192.168.25.5 x.x.x.x
>
> The "source list 10" would refer to an access-list allowing and denying
> certain ips
>
>
Hello People:
Actually I am using dynamic NAT to allow my intranet users access the
internet. The problem is when a configure a static NAT from external Ip to
the internal IP, It does not work. But the funny thing is it does not work
only to a specific IP. Take a look at my configuration. I r
12 matches
Mail list logo