You will have to buy 2 wireless bridges.
The 350 series wireless bridges are 802.11b. 100 milliwat, and support
rp-tnc connectors, this will allow you to choose a range of antennas to use.
I would supose you have 3 major issues to worry about
1. I am assuming you have line of sight currently, are t
In your AAA config specify a line for
aaa accounting commands 15 default start-stop
specify whatever group or method list you wish
Cheers,
Colin McNamara
""Amer"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...> Is there is a way to log or
account for all the exec commands that
it is the web interface to the 350 bridge, workgroup bridge, and Access
point
""Arni V. Skarphedinsson"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Can some one tell me, what AP is focused on in the Wireless LAN for Field
> Engineers exam (WLANFE 9E0-581)
>
> Is it the 350,110
11 megabit, for 802.11b, so with headers and encryption, 8-9 megabit.
Weather conditions, distance, and interferance can nock this rate down.
the 2 db dipole "rubber ducky" antenna's that come stock with AP's and some
Bridges have about a 200 meter range. If you have any questions on what
antennas
Any one here correct me if I am wrong
I have experienced the same thing going from frame relay to an ATM IMA
interface (using FUNI in the middle).
The problem was that inverse arp is not supported accross that topology. So
in this case you use a combination of frame-relay maps, and ATM maps.
In eit
Yes, callmanager supports SIP, there are also ip phones that function as
sccp endpoints.
Colin
""chinmay chinmaylolienkar"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hello,
> Is is possible to integrate Non-cisco IP phones with Cisco call Manager.
>
> Regards
> Chinmay
M
Sounds like they have cleaned up this exam alot.
When I took the exam it was disgusting, full of errors. In a few instances
there were questions with no possible correct answers.
Congratulations.. on to the next - never ends huh ;)
--
Thank you,
Colin McNamara
Office 925-251-0174
Cell 925-216-
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=58005&t=57810
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Hi,
How to show a /24 loopback address as /24 entry itself in the routing table?
By default in OSPF it is shown as a /32 even if you advertise as /24. I
didn't do any summarization inbetween.
Any helpers please...
thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52478&t=
thanks a lot Stefan!
I got the answer the doc says I need to put an "ip ospf network type
point-to-point" cmd on the loopback in order to to reveal their actual
subnet identity. I do not know whether this will work for a
point-to-multipoint network. Let me look for an alternative.
thanks
Messa
Dom,
what is HTH?
thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52522&t=52463
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAI
What is it and where do we really use it I mean in what circumstances?
Can someone pour some light on it?
thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52573&t=52573
--
FAQ, list archives, and subscription info: http://ww
Hi all,
How much weightage does a 'documentation' at the end of the lab? Do we have
to really break our head to draft this perfect?
I never cared much on my past attempts...I am for the 3rd attempt int 2
weekssomeone help me?
thanks
Message Posted at:
http://www.groupstudy.com/form/read.p
How can we prevent the dlsw connection falling back from backup peer to
primary peer when the later comes back alive. The 'linger' option with '0'
sec and the 'no linger' option does not seems to be solving the issue.
Any helpers please...
Message Posted at:
http://www.groupstudy.com/form/read.
Hi all,
I got a doubt on dlsw I could not find much info in CCO too.
How can we prevent the dlsw connection falling back to the primary peer from
the backup peer. The 'linger' option with '0' sec and the 'no linger' option
does not seems to be working out.
Any helpers please...
thanks
Message
15 matches
Mail list logo