Hello,
I am trying to install WIC-2T on the Cisco 3725/3745, it is not fitting
physically?
Can you please advise if I can use the regular WIC-2T or there is
special 2T module for the Cisco 3725?
Thanks.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=63095&t=63095
--
PROTECTED]
Subject: Re: WIC-2T & 3725 routers [7:63095]
Hello,
I was having this problem with this module, what image are you using? I
did a downgrade of the image.
regards!!
Anne Beatriz
- Original Message -
From: "Mamoon Dawood"
To:
Sent: Saturday, February 15, 2003 2
Dear All,
I'm configuring a Cisco 1601 router as an access server for my home PC,
I'm using this router to dial out from my office PC to reach my Home PC,
till now, I could initiate a connection so that both modems handshakes
but then no connection happened and immediately the line disconnects
aft
Dear All,
While tring to download an IOS to the new (Clear) flash of a 3662 router
using the xmodem method, and after finishing the download and reload, we
got the following message,
device does not contain a valid magic number
boot: cannot open "flash:"
boot: cannot determine first file name on
Hi Tunde,
I tried this with no luck, I think the cause is that we are depending on
the Win2000 account database,
Thanks,
-Original Message-
From: Tunde Kalejaiye [mailto:[EMAIL PROTECTED]
Sent: Tuesday, May 13, 2003 5:54 PM
To: Mamoon Dawood; [EMAIL PROTECTED]
Subject: Re: ACS 3.0 [7
Dear Friends,
Is there any free tests that can help me pass the CSPFA (Cisco Secure PIX
Firewall Advanced) exam,
Thanks in advance,
Mamoon.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=41156&t=41156
--
FAQ, list archives,
Dear All,
Our customer who bought a Cisco PIX and router for his HQ want to connect
the HQ
office with another one in different location, they will implement VPN
connectivity from the HQ PIX to the other side PIX, is there any add on
software
need to be purchased or it will be ok with the default
Dear All,
Is there a source for cheap or OEM WIC-1T and WIC-2T,
Thanks,
Mamoon
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=42209&t=42209
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.htm
Dears,
I have a customer who want to implement video streaming over his existing
LAN,
He will connect the output of his Digital Receiver to the required box, this
Box
must trat 16 channels and stream them over the LAN, does anyone knows
anything
about the best solution,
The compatitors proposed P
Dear All,
Does the new catalyst switches Cisco WS-C2950G-48-EI and WS-C2950G-24-EI
support
WS-G5483 Gbics (The 1000BaseT GBIC),
Regards,
Mamoon
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=44004&t=44004
--
FAQ, list archives
Dear All,
Does the new catalyst switches Cisco WS-C2950G-48-EI and WS-C2950G-24-EI
support
WS-G5483 Gbics (The 1000BaseT GBIC),
Regards,
Mamoon
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=44006&t=44006
--
FAQ, list archives
,
Kindest Regards,
Mamoon Dawood
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=45649&t=45649
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure viola
Dear All,
I have the following Scenario:
DSL router connected to the ISP, behind this router I will install 515E PIX
firewall,
Now without the PIX, we have to put a username and password inorder to access
the web,
how can we do the same after putting the PIX, I mean what is the needed
configura
Dear All,
Can we implement a QOS and bandwidth allocation over a Cisco 1700 Routers,
Regards,
Mamoon
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=47231&t=47231
--
FAQ, list archives, and subscription info: http://www.groupst
Dear All,
I the PIX firewall, Can I make an access list using the FQDN (eg:
www.yahoo.com)
instead of using IP address, since I want to permit users to only enter some
sites,
I think the problem is that we can not configure a name server,
Kindest Regards,
Mamoon
Message Posted at:
http://www
ll do,
Waiting your response,
Kindest Regards,
Mamoon Dawood.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=47827&t=47827
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report m
Dear All,
I have two sites connected using Cisco 1760 routers,
In site A I have a control panel, this control panel has a serial
connection (RS-232) to enable it send a print file each 12 hour, Now in
site B, I'll have a serial printer to receive the Panel file and print
it out,
I need your help t
Dear All,
I have two sites connected using Cisco 1760 routers,
In site A I have a control panel, this control panel has a serial
connection (RS-232) to enable it send a print file each 12 hour, Now in
site B, I'll have a serial printer to receive the Panel file and print
it out,
I need your help t
Dear All,
=20
I'm doing my first AS5300 installation, after configuration, I did the
first connection test by using my notebook and open a Hyper terminal
session then dial the AS5300,=20
The AS5300 software configuration guide says that after dialling from
the Hyper I must get The username & pas
Dear All,
=20
I'm configuring TACACS+ with AS5300, but I can not understand the
meaning of TACACS+ or RADIUS Key, is it the enable secret password on
the AS5300?
=20
Regards,
Mamoon
[GroupStudy.com removed an attachment of type image/gif which had a name of
Blank Bkgrd.gif]
Message Posted
Dear Friends,
I need your urgent help on the following problem,
I have a Network 192.168.16.0/24, with an application server
192.168.16.2/24, there is a mobile users on my firm who are dialing from
their Notebooks to the internet using normal analog dial-up modems, from
internet I need these use
Dear All,
How to erase Enable password from 3524 switch,
Regards,
Mamoon
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=51635&t=51635
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Repo
Dear All,
How to erase Enable password from 3524 switch,
Regards,
Mamoon
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=51709&t=51709
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Repo
Dear All,
I will install an AS5300 tomorrow; it has 120 modems and Octal E1/PRI
connections, four of these E1 lines will be connected as ISDN-PRI lines,
I need to know the easiest and simplest way to configure it, if there is
a URL with examples this will be highly appreciated,
Kindest Regards,
24 matches
Mail list logo