BJ,
Your documentation approach will probably earn you many points in the lab.
But IMHO put it on paper. The lab elves will mess with whatever they can.
- susan
From: Bradley J. Wilson
One thing I'm curious about, and this is because I've found
this to be an invaluable tool to use while
Faisal,
This is my understanding of CCIE lab scheduling:
You get scheduled for the 1st slot available.
If you have to take it again, must wait 30 days between attempts.
If you break the code of conduct, must wait a year before next attempt.
CCIE LAB Code of Conduct
The following
NetEng,
Debug isdn q921
Debug isdn q931
Get the ISDN cause code numbers for the errors.
Refer to http://www.eicon.com/support/helpweb/diva/diag2.ASP?x=a
troubleshooter - type in the cause code and it will tell you if the problem
is your router, your telcom, remote telcom, remote router.
Great
From: Will [mailto:[EMAIL PROTECTED]]
Does anyone know if the CCIE written has drop down menus with
all commands
or do you have to remember the syntax of several thousand commands?
My CCIE test had no drop down lists - I had to remember the commands. It
seemed there were about 5 (?)
This access-list would permit www for the source-ip's and deny everyone
else. Are you going to enable access to newsgroups and ftp sites?
-susan
-Original Message-
From: Bob S [mailto:[EMAIL PROTECTED]]
Sent: Thursday, June 07, 2001 3:22 PM
To: [EMAIL PROTECTED]
Subject: Re:
--- [EMAIL PROTECTED] wrote:
host A -Ethernet-router SR/TLB-token
ring---host B (MAC
address changes. What is the source MAC? What is the
destination MAC?)
Bit swapping from canonical Ethernet address to noncanonical Token ring
address should be easy to do by the
Stephen,
Your situation is very common. Especially with military contracts. The
Colonel is never wrong, but YOU are, even if you were ordered to implement
his solution.
Average and mid-level personnel are usually not blamed by
insecure/immature management because They were just doing
Congratulations. That's a difficult test. Enjoy your CCNP.
-Original Message-
From: Andrew Larkins [mailto:[EMAIL PROTECTED]]
Sent: Friday, June 01, 2001 2:14 AM
To: [EMAIL PROTECTED]
Subject: Passed CIT - Now a CCNP!! [7:6725]
I passed my final exam yesterday - CIT with a score of
I liked the single master topology so much, I bought the company! Just
kidding :)
I bought the workbook yesterday online. Can't wait till it gets here. I've
just started my 6-month-long router party in my dining room. Dining rooms
aren't very useful for much else - I'm not much on formal dinner
Want to make any UNIX-head apoplex? Remind them that DOS is UNIX subset.
The multi-tasking multi-threaded functions were dropped because there
weren't enough bits in the registers for the Intel 8088. These were added
back in when the hardware for PC's was available. However, they did add
Isn't X.25 included in the lab test because it's still widely used in places
like Brazil and also in satellite communications (with a variation on the
mod value)? This is what I've heard, is this correct?
- susan
-Original Message-
From: Howard C. Berkowitz [mailto:[EMAIL PROTECTED]]
John, Kevin and Group,
I know most on this list agree..
What difference does it make if we start from books go to
experience, or start with experience and go to books? The main point is we
know where we want to go, and either way we'll get there.
Does anyone on list
Robert,
Since you can see network devices then it's probably access to the
domain controller SAMs database that is hosing your PCs. Especially if
ipconfig/release renew found the DHCP server received new IP info then
TCP/IP is working fine, so timing issues are a low probability. It's
Michelle,
Check this ISDN debug ppp site.
http://www.cisco.com/warp/public/112/chapter17.htm#ISDNOUT , ISDN Outbound
Calling section.
Your log was not attached to the message so we don't know what happened.
Also, try adding
ppp authentication chap
to your config under your BRI0/0
Relax, it may not be your configurations or your equipment. It's happened
to me several times with frame-relay lines in Alabama (don't laugh, much).
The interface shows line up, protocol up, but the frame relay provider was
temporarily pointing me to the wrong destination in the frame relay
15 matches
Mail list logo