I have three routers connected via token ring, A, B, & C.
Routers B & C both have serial links to the same location.
Can I configure router A to balance the traffic between routers R & C.
Currently using static routes in A to send traffic to B only.
Thanks!
___
Routing protocol in use on router A is OSPF.
Routers B and C are not under my control, and while they too use OSPF, I would
prefer to use static routes to the destination networks, as they have LARGE
amounts of routing entries.
The two serial links from B and C are both FR T1's.
|+-
Well, then I guess my real question should have been on summarizing the routes
coming into router A.
Can you go into a little more detail on that?
BTW, I don't have the 2nd router connected yet. I wanted to find out what would
be involved firstso I can't tell you if the metrics are the sam
Currently, static routes are used between A and B/C (C doesn't exist yet)
|+--->
|| sojourner9@ho|
|| tmail.com|
|| |
|| 07/14/00 |
|| 10:43 AM |
|
Can anyone explain why, when I do an FTP from one location over a Frame Relay
link to another, it starts out with a good throughput, but after a few minutes,
drops significantly, and the total bandwidth is not being exceeded. There are a
few routers in-between that I have no control over.
Thank
Actually, the one FTP server is within a "private" network. We have two
companies that are connected via AT&T managed network.
We're not doing any load control, nor is the other company, but I don't know
what AT&T may be doing within the FR part... or their routers.
|+--
You get that type of an error if you previously created that DLCI and then
deleted it, but did not re-boot the router. Once you re-boot the router it
should work.
|+--->
|| [EMAIL PROTECTED]|
|| et.sa|
||
you could try to configure area 1 range command at the abr, R2.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=70041&t=69969
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report miscon
To match the even subnets, use
access-list 1 permit 192.168.0.0 0.0.254.255
To match the odd subnets, use
access-list 1 permit 192.168.1.0 0.0.254.255
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=70040&t=70039
--
FAQ, list ar
You should do bit-swapping because the routers will speak in non-canonical
addressing.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=70164&t=70154
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.
can someone help me? i am currently doing bgp in my test lab. i did a
community no-advertise in one of the routes to be advertise by the local as
to another as, but i can't see it in that other as. i also did a
redistribution from bgp to igp (ospf) in the other as so that both bgp and
igp would syn
11 matches
Mail list logo