Hello all,
Can anyone enlighten me on the behavior of having multiple "ip
helper-address" statements on the same interface? We are setting up a DHCP
solution where we will have two DHCP servers and the Cisco router serving as
the relay agent. If I have two ip helper-address statements
Hello all,
Can anyone enlighten me on the behavior of having multiple "ip
helper-address" statements on the same interface? We are setting up a DHCP
solution where we will have two DHCP servers and the Cisco router serving as
the relay agent. If I have two ip helper-address statements
ooting method:
> >
> > 0. Document your network topology and protocols.
> > 1. Define the problem.
> > 2. Gather facts.
> > 3. Consider possibilities.
> > 4. Create an action plan.
> > 5. Implement the action plan.
> > 6. Observe the re
:24 PM
To: Quezada, Jose L; [EMAIL PROTECTED]
Subject: Re: Appletalk Help [7:34079]
Are the AppleTalk devices on a switch? This smells like a portfast problem.
Enable portfast on the switch ports, and I suspect the problem will go away.
I think that what's happening is that when the newly b
Hello all,
Please excuse my ignorance with Appletalk. We currently have a
problem with some nodes running Appletalk. In the apple arp table of our
router, they show up with an address such as 65280.128. My understanding is
that when a node boots up, it is assigned a temporary network addr
If it is feasible, you might want to move the workstation to work your
switch is and connect with a CAT 5 patch cord. If you don't get the errors,
then your problem is in the cabling between the switch and the workstation.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTE
Hello all,
The Catalyst 65XX switches support Jumbo Frame Feature. How has the
experience been for anybody using it? Does the NIC have to also support the
larger MTU size? Are there any "gotchas".
Any feedback would be appreciated.
Joe Quezada
Message Posted at:
http://www.groupstud
Hello all,
I have some doubts regarding SNMP. What exactly does SNMP read-only
give you? I believe it has to do with the MIB's, but considering Catalyst
5000 switches, what can you do with SNMP read-only and what requires
read-write.
Also, if I want to only monitor the network fr
I found the following excerpt on CCO. It describes how slot 13 of the 5500
is a dedicated slot for an ASP or a CSR. Is this software dependent? In
other words, have an subsequent OS upgrades eliminated this restriction?
xtocid245915BM_25937BM_1015259Catalyst 5500 Switch
The Catalyst 5500 BM_101
9 matches
Mail list logo
