Cisco 7507 PA-4E full duplex operation [7:34076]

Cisco states that their PA-4E module (four port 10BaseT) for 7500 Series routers is capable of being configured for full duplex operation. Under the ethernet interface, no "full-duplex" option available. Also, the command "no half-duplex" returns "Invalid input". Has anyone configured this modul

Re: Cisco 7507 PA-4E full duplex operation [7:34076]

To answer my own question, Cisco added this feature for 7500 Series routers in IOS releases 12.1.9.6E and later. With this release, the interface command to accomplish this task is "duplex full". Tauseef ""Tauseef Nagi"" wrote in message [EMAIL PROTECTED]"

Re: Additions to CCIE R&S lab [7:34136]

Cisco's europe office in Brussels, Begium. Tauseef ""Scott H."" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > source? > > ""Tauseef Nagi"" wrote in message > news:[EMAIL PROTECTED]... > > Hi all, > &

Re: Where to begin? ( troubleshooting frame relay ) [7:34264]

Hello, Have you tried looking for the problem somewhere else. If you have switches in your environment to which these devices are connected. Check for any errors on the ports to which these devices are connected. Look for the symptoms which would induce latency+errors in LAN enironment, like dupl

Re: Halabi's Internet Routing Architecture book [7:35165]

Here's the URL, http://www.amazon.com/exec/obidos/ASIN/157870233X/qid=1013495851/sr=2-1/ref=s r_2_1/103-3718400-6849429 Please look for URL wrapping. You have the right ISBN number for latest (second) edition of this book and yes, it is 2 years old now. HTH Tauseef ""Hunt Lee"" wrote in mess

Re: Cat5k Reboots sporadically [7:35477]

Sean, If you have redundant power supply in the chassis of the same 5500, you should not be seeing switch resets due to one power supply failure. All you should see is that the logs will indicate that power supply 1 is reseting. Having said that, if you still suspect that the switch reset is due

Re: Latency in Telnet, intervlan routing [7:38187]

Here are few things you could look into, 1) Is this a new config.? 2) Did it ever work before? if yes, what changed? 3) Assuming that routing is setup correctly on the Cat5K routing module (if this is being used), (a) do you have the right static routing setup on the server to respond to

Re: Latency in Telnet, intervlan routing [7:38187]

In the Unix servers, please check for /etc/resolve.conf and see if name servers are configured correctly. If these Unix servers don't require name services, please add just their ip addresses to /etc/hosts file and then check for response time. This is "reverse nam lookup" issue. Thanks. Tauseef