Hi,
I have a question regarding dynamic natting using ip nat overloading. I
have the following configuration.
ip nat pool test 66.66.66.32 66.66.66.63 netmask 255.255.255.224
ip nat inside source list 1 pool test overload
access-list 1 permit 10.0.0.0 0.0.255.255
>From internal, I can ping the
Hi,
How do I go about SPANning multiple vlans to a port. I have a 6000 IDSM
blade in slot 9 and the monitoring port is 1. However, I can only span one
vlan (one ingress session for both directions) at any one time.
"set span "vlan#" 9/1"
Running this command again for another vlan will only m
Hi,
I am having some issues bringing up a 64k frame relay circuit. Wcom seems
to think it's a bad csu as they aren't able to loop it. As a result, I did
some testing on my end. I enabled inward bound looping on the dsu also.
For some reason, the line protocol for the serial interface comes up
Without the use of ACL logging.
thanks...
-Original Message-
From: Telemachus Luu [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, November 28, 2001 1:45 PM
To: [EMAIL PROTECTED]
Subject: Logging source ip for telnet sessions [7:27585]
Hi,
At my last company, I was able to configure
Hi,
At my last company, I was able to configure logging for all telnet sessions
into the routers. The logs displayed the source IP of the client and of
course the timestamp. I have since forgotten how to enable this. Can
someone please advise?
thanks...
Message Posted at:
http://www.group
Hi,
I have multiple nodes and have set up logging to a syslog server.
Currently, in my /etc/syslog.conf, I have local0.debug through local7.debug
being used writing to separate log files. On the first 8 devices, I have
set logging facility local0 throught local7 for each device accordingly.
Howe
How does one console into the MSM on a Cat 6509? I can console into the
switch and session into the msm, but would like to know the console method.
Thanks,
Telemachus
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9858&t=9858
hello,
I have two e interfaces. On e0/0, I applied ext ip 207.x.x.1, on e0/1, I
applied int 192.168.1.1. I labeled e0/0 with ip nat outside, and e0/1 with
ip nat inside. in global, i configured ip nat inside source list 1
interface e0/0 overload, where acl 1 is permit any. Traffic passes thou
Hi,
I know this might not be the right place to ask this question, but I am
doing some market analysis on U.S. companies that provide network services,
specifically: infrastructure, high availability, and network security. I
have a list of some 40 public companies, mainly vendor firms like IBM a
9 matches
Mail list logo