Thank you for your response Pricilla, I'm on my way to your page now. This
is just a project for myself to have access to certain files when I'm away
from home, not a public access ftp server. My private network is currently
behind a 1750 w/ IOS Firewall Feature Set until I can get a PIX.
I have
I'm trying to provide access from the internet through a router to an ftp
server on a private network... this is part of the config I have so far:
ip nat inside source static tcp 192.168.6.2 21 interface Ethernet0 21
Ethernet0 has the global address and 192.168.6.2 is the ftp server on the
Hello, have you come up w/ a solution to allow connections into your
network, say to an ftp server from the outside, through a router using the
IOS Firewall Feature Set? I could use some input or any ideas on how to
configure that.
Thanx for any suggestions
Message Posted at:
Does anyone know of any instructor led CCIE Security level training
available in the San Diego area?
I'm not necessarily talking about boot camps, but a class longer than a
week or so. Also, are there any members here in the San Diego area with the
CCIE Security lab as a goal?
Thanx for any
Hey Frank,
I'm trying to hook up a Cisco 1750 ethernet port a Linksys router to my
Roadrunner cable modem. The 2nd ethernet port on the 1750 will have lab
routers connected to it, the Linksys router (4-port switch) will have a few
computers connected to it.
I want all to have access to the
That's what I'm having a problem with. RtrB can ping the PC RtrA can ping
the RtrB e0 interface, but won't ping the PC. It was mentioned to make the
default gateway on the PC the RtrB e0 address.
I'll try that see what happens... thanx to all your help.
That was exactly the answer I needed.
Hey Paul, I'm not getting any communication between s0(192.1.1.3) e0
(192.168.1.10) on RtrB using an extended ping with e0 as the destination and
s0 as the source. I entered ip route 192.168.1.0 255.255.255.0 e0 and it
doesn't show up in the route table.
I entered ip route 0.0.0.0 0.0.0.0 e0
I need help w/ a little config info... RtrA (s0 192.1.1.4)
RtrB (s0 192.1.1.3) connected via serial cable. They can each ping each
other. RtrB has a PC (ip address 192.168.1.1)connected to its' e0 int
(192.168.1.10) through a hub.
How can I ping from RtrA (s0 192.1.1.4)to the PC attached to
8 matches
Mail list logo
