Please be sure that no auto-summary is configured under the Eigrp processes.
Winston
-Original Message-
From: Chan, Ricky [mailto:[EMAIL PROTECTED]]
Sent: Thursday, August 01, 2002 3:11 PM
To: [EMAIL PROTECTED]
Subject: Routing Question [7:50431]
Hi all,
I have two 2600 series
goes into effect.
Of course you have to make sure the IP addressing is correct.
Winston.
-Original Message-
From: Chan, Ricky [mailto:[EMAIL PROTECTED]]
Sent: Thursday, August 01, 2002 4:49 PM
To: 'Winston Shaw'; [EMAIL PROTECTED]
Subject: RE: Routing Question [7:50431]
Yes, after I
4:54 PM
To: 'Winston Shaw'; [EMAIL PROTECTED]
Subject: RE: Routing Question [7:50431]
One last question, is it necessary to put the bandwidth command and clock
rate command in all the serial interfaces? So far, I only specified them at
router1 both serial interfaces. Router2 serial interfaces have
Hello Mr. Litkowski,
Based upon what is represented as your goal and diagram, I would suggest you
use a default-information originate route-map statement under the ospf
process on router A. The route map should clearly identify the bgp routes of
interest.
Winston V. Shaw
CCIE(#7991)
Not sure, because I do not have a 2924XL-EN handy.
Try setting port security commands or setting cam filter commands. If it
takes these commands you are in business. Be careful of how you use them
though. Using MAC addresses for security can cause problems like shutting
ports down when the
Hello Don,
I think you could set up DHCP scopes on a server and use the ip helper
address command to direct dhcp discover broadcasts from your clients. The
router should place its own sub-interface address in the packet and send it
to the DHCP server. The server should then pick from the
Hello,
If you have an R/S lab date in Brussels in August or September 2001 and you
would like to switch to January 2002, send me an email offline.
[EMAIL PROTECTED]
WVS
___
Send a cool gift with your E-Card
7 matches
Mail list logo