in order for pdm to work properly every time you must have an enable
password in your pix
Timo Graser wrote: I did configure that all. And I am using IE 6.0 so it
is MS VM.
Georgescu, Aurelian wrote:
First, you should enable your http server on the PIX, and then you should
allow your
allowing just one host to access the pix via pdm: http 10.1.10.200
255.255.255.255 inside
if you are allowing networks (i.e. 10.1.10.0 255.255.255.0 inside) make sure
to remove them.
[EMAIL PROTECTED] wrote: Don't use the time and date, use the
Cryptochecksum from the show
config command. If
you're ping_acl is only allowing icmp traffic.
cage wrote: The following is my configure of pix 525, now the nodes in
the dmz can not
connect to the outside, why?
and do i have to use the NAT command to the traffic from the dmz to the
outside. It seem that the pix cant route the dmz traffic to
in addition...do not forget your static lines (if traffic is inbound)... =)
Craig Columbus wrote: The pix can easily do this. Use one line for each
outside address that you
want the inside client to access. You don't say what port you're
contacting on the outside, but you should also limit
All,
I'm looking to implement a syslog server on windows 2000, that logs pix and
cisco router logs. it should be able to parse information. i know that a
linux or bsd server would be better but i can't implement that platform in
this case. any suggestions? we were looking at kiwi, but it
pix cbt's are good...as good as taking a class
John Kaberna wrote: That is a ridiculous amount of money to pay for CD's
IMO. Let us know how
interactive they are and how well it does when simulating commands. If it's
a bunch of slides that's a rip off.
John Kaberna
CCIE #7146
NETCG Inc.
Cisco
Does anybody know when the next ccnp study group will
start? can anybody start a study group?
Thanks!
__
Do You Yahoo!?
Yahoo! Messenger - Talk while you surf! It's FREE.
http://im.yahoo.com/
_
FAQ, list
7 matches
Mail list logo