Re: ip classless

Wrong. ip classless allows a router receiving a packet it doesn't know how to forward (unrecognized subnet and no default route in the routing table) to choose the best supernet to forward it finally. Otherwise with no ip classless, the packet is discarded. cvp ccnp, ccda "Yee, Jason"

Re: how to limit the speed

For ethernet media, the bandwidth is fixed. bandwidth command at the int. is just informational. Could be used by IGRP as parameter to calculate the metric advertised. cvp ccnp, ccda "gary" [EMAIL PROTECTED] on 08/23/2000 11:42:12 AM Please respond to "gary" [EMAIL PROTECTED] To:

Terminal server

Hi all, Can someone tell me whether it's possible to use the aux port connected to the console port of another cisco router? I tried the same conf as if I was using the asyn port but it failed. (transport input all, no exec) Thanks, cvp. ___ UPDATED Posting

Re: Any change in the Material for Cisco's Remote Access and Support paper?

I have just passed the Remote access2.0 exam and was surprised to see on the title bar BCRAN1.0!!! After a short investigation, I realized that there were no changement. The objectives on cco for this new exam are not so accurate. Lots of questions on x.25 and asynchronous conf.!@#$ VoIP,

RE: Terminal server

Thank you but when I do a reverse telnet... After the "debug telnet" command, here is what I got: 2501#telnet 172.16.1.1 2001 Trying 172.16.1.1, 2001 ... Open 00:16:52: Telnet1: 1 1 251 1 00:16:52: TCP1: Telnet sent WILL ECHO (1) 00:16:52: Telnet1: 2 2 251 3 00:16:52: TCP1: Telnet sent WILL

RE: Terminal server

2501#sh line Tty Typ Tx/Rx A Modem Roty AccO AccI UsesNoise Overruns * 0 CTY -- --- 250/0 1 AUX 9600/9600 -- --- 200/0 2 VTY -- --- 20

RE: Preventing password recovery

The config-register 0x102 prevent it. cvp Dennis Laganiere [EMAIL PROTECTED] on 08/10/2000 02:10:45 AM Please respond to Dennis Laganiere [EMAIL PROTECTED] To: "'Michael Fountain'" [EMAIL PROTECTED], [EMAIL PROTECTED] cc:(bcc: Claude-Vincent PEREZ/JP-TOKYO-HOLDING/LVMH) Subject:

Re: CCIE Written Passed

I would be pleased also to know it. I'll pass it in 2 weeks. Thank you very much cvp Luan Kim [EMAIL PROTECTED] on 08/09/2000 05:47:55 AM Please respond to Luan Kim [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: [EMAIL PROTECTED] (bcc: Claude-Vincent PEREZ/JP-TOKYO-HOLDING/LVMH)

PAP

Does someone know when PAP is preferred to CHAP? Thank you, cvp. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to

Re: Hang on Cisco Documentation

If you're using a proxy server, be sure that the ip address 127.0.0.1 doesn't use it. cvp [EMAIL PROTECTED] (John Nemeth) on 07/26/2000 04:57:24 PM Please respond to [EMAIL PROTECTED] (John Nemeth) To: "myccie Lian" [EMAIL PROTECTED], [EMAIL PROTECTED] cc:(bcc: Claude-Vincent

Re: console omnistack 4024

The cable console is a simple DB9 F/M gender (-serial port). By default, it is set to 9600bps, 8 data bits, none parity, one stop bit. Hope this may help you, cvp. rudhy [EMAIL PROTECTED] on 07/25/2000 10:12:49 PM Please respond to rudhy [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc:

RE: BCMSN question

Actually, I am preparing for the switching2.0 exam, already got the ccna2.0 and Routing2.0. Routing2.0 only focus on the routing protocol such as ospf, eigrp and bgp4 (+vlsm), more than v.1(byebye appeltalk and ipx) I feel switching2.0 exam different from clsc and only work online with cisco

Re: CCIE - Austin, TX

Good point but you don't judge it as well as you don't understand the french history... cvp michael wedel-durrow [EMAIL PROTECTED] on 07/21/2000 06:21:36 AM Please respond to michael wedel-durrow [EMAIL PROTECTED] To: Bill Fenech [EMAIL PROTECTED], groupstudy [EMAIL PROTECTED] cc:

RE: ACRC Vs. BSCN

I passed it also last WE. Add with it VLSM which takes 3/4 of the last one. Any feedbacks about the Switching 2.0 exam? cvp Dennis Laganiere [EMAIL PROTECTED] on 07/19/2000 03:04:55 AM Please respond to Dennis Laganiere [EMAIL PROTECTED] To: "'Eddie O Leary (EEI)'" [EMAIL PROTECTED],

RE: Windows based sniffer

I don't understand the name of the Web server?! cvp Dinesh_Kakkar [EMAIL PROTECTED] on 07/19/2000 04:31:23 PM Please respond to Dinesh_Kakkar [EMAIL PROTECTED] To: Oscar Rau [EMAIL PROTECTED], Cisco GroupStudy [EMAIL PROTECTED], "'[EMAIL PROTECTED]'" [EMAIL PROTECTED] cc:

Re: IP SUBNET-ZERO

Strongly discouraged as all ones ip-subnet. Otherwise, you'd refer to the classfull address. cvp ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct

Re: CCNA 2.0 passing score?

822 cvp ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Switching 2.0 module

Does anyone have some more detailed information about the Switching 2.0 exam? seems to be really different from the clsc exam but how much? cvp ccna ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription