The "cool factor" is very high!
In other words it's just cool. Seriously if there was a way to put a price
on the amount of work that could be done do to always being connected to the
LAN no matter where you are... I would say that would be a positive.
David
-Original Message-
Fro
Title: RE: challenge problem
Jim,
I'm sure you meant to use 0x for the all 1's
test. Just clarifying.
-Original Message-From: Rampley, Jim
[mailto:[EMAIL PROTECTED]]Sent: Wednesday, October 11, 2000
10:35 AMTo: 'Fred Flinstone';
[EMAIL PROTECTED]Subject: RE: challeng
The routers either forward the packet or they don't, right? They don't care
if it is a word document or an excel spreadsheet. The router deals with
Layer 3 and could care less about the higher layer protocols (unless you
have configured ACL's to filter such things).
To rule out the carrier a
Two major differences that I have always remembered are:
TACACS encrypts the entire packet, where RADIUS only encrypte the password
portion. This makes TACACS more secure.
TACACS uses TCP and RADIUS uses UDP as a transport layer protocol.
One other thing is that Authentication and Authorizatio
"no budget and limited time"
sounds like most other
projects. :^)
Thanks for all the hard work
Paul.
David.
-Original Message-From: Paul Borghese
[mailto:[EMAIL PROTECTED]]Sent: Thursday, September 21, 2000
1:37 PMTo: [EMAIL PROTECTED]Subject: Re:
Bye
I love it wh
Yeah CDP is Cisco proprietary, but as you all know it runs on "most" Cisco
products, not just Catalysts. I say most because there are certain devices
that are stamped Cisco, but were developed by other companies and don't
support CDP.
If I remember the original question, the interviewer asked s
Answer to Question #2 can be found here in the last sentence of the
introduction incase anyone is interested.
http://www.cisco.com/warp/public/473/21.html#related
David
-Original Message-
From: Dale Holmes [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, September 20, 2000 12:34 PM
I'll bite.
#1 not sure, but I would say DLCI 1023 is reserved for LMI
#2 VTP (Virtual Trunk Protocol) is the proprietary protocol on the Cat's
#3 Framing, Line Coding, Clocking, and channels (or timeslots)
anyone..
-Original Message-
From: Plantier, William [mailto:[EMAIL P
Check this site out, everything you want to know.
http://www.cisco.com/warp/public/105/default.html
-Original Message-
From: Matt C. Lange [mailto:[EMAIL PROTECTED]]
Sent: Monday, September 18, 2000 2:45 PM
To: Jeff Martinez; [EMAIL PROTECTED]
Subject:a stupid questio
Yes EIGRP will load across parallel paths (4 by default, up to 6 with the
'max paths' statement). Hope this helps.
David
-Original Message-
From: Traister, Blake (SBCI) [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, August 30, 2000 1:53 PM
To: '[EMAIL PROTECTED]'
Subject:
What version of IOS are you running? And what are you using as your
Authentication mechanism(RADIUS, TACACS, Local)? Also how often does the
problem happen?
Though question, I'm just trying to gather a little more info. Thanks.
David
-Original Message-
From: Petra Hofmann [mai
Kevin,
The reason Cisco Wants an MCSE 2000 is due to the fact that the CCM version
3.0X (Cisco Call Manager) runs on a Win2000 platform. It is basically a PBX
in a Windows Server.interesting huh?
Hope this helps.
David
-Original Message-
From: Kevin Wigle [mailto:[EMAIL PROTE
Hell, I just pronounce it as "Pseudo intelligent, path selecting,
multi-protocol packet forwarding device".
-Original Message-
From: Dale Holmes [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, August 23, 2000 9:25 AM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subj
Puffers Buddy,
Actually you are correct about configuring a default route, BUT you won't
be able to use that default static route if you don't enable your router
with IP classless (enabled by default in 11.2 and up). IP classless allows
a router to use the best "supernetted" route.
Whatshakin
Raphael,
I just asked one of the guys in my group that is testing all of Cisco's
Wireless (Aironet) equipment. He said that as long as the Airport hub is
802.11 DSSS compliant it should work. I see that you did already read that
the AirPort is 802.11 so I would think you will be good to go.
Give this a try. Under your 5 virtual terminal lines (vty 0 4) type in
'transport preferred telnet'
That should then assume telnet as the command before you type in the
hostname (i.e routerX)
The preferred transport is telnet by default, but I suspect someone changed
that on your vty lines to r
Would the answer be "use a virtual link"?
Just guessing.
David
-Original Message-
From: Chuck Larrieu [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 14, 2000 11:52 PM
To: Cisco Mail List
Subject:OSPF question - discontiguous areas
This question came up on anothe
Dave,
If you have a CCO login check this page out. It explains the differences
between Default Gateway, Gateway of last resort, and default network. If
you don't have a CCO login, let me know and I will paraphrase the article.
Hope this helps.
http://www.cisco.com/warp/customer/105/default.
I
would be concerned with the CRC's and input errors. It looks like there
may be a issue with the circuit, cable? Just something to check
out. It looks like the counters were cleared 4 days ago and with the
amount of data going through this interface the number of CRC's is worth looking
Can I just add that the test I had this past Friday was heavy on Trunking
and VTP, also Multicast. Just my observation. I passed, but the amount of
those type of questions took me by surprise somewhat. Hope that info helps
someone out there.
David
-Original Message-
From: swapnil
Ethernet uses CSMA/CD, Appletalk uses CSMA/CA (Collision Avoidance). Hope
this helps.
David
-Original Message-
From: Luong, David [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 17, 2000 4:19 PM
To: '[EMAIL PROTECTED]'; 'Cisco Group Study'
Subject:RE: Deferred Packets
You will want to bump up the N1 parameter for sure. This normally defaults
to 8 X MTU= 12016. If you are talking PU4 to PU4 then you will want to set
it to somewhere like 32768. The command is and interface command on the
serial 'sdlc n1 32768'.
The N1 is the maximum size incoming frame. The
There is another mechanism that is used in conjunction with PPP to assign IP
addresses, but it is Not PPP alone. IPCP (Internet Protocol Configuration
Protocol) is used assign IP addresses to hosts over a PPP link. So, yes you
were correct and the Headhunter should revise his question. Hope th
23 matches
Mail list logo
