I am upgrading my 2600s. 16/16 is ideal for 2500s (for enterprise image,
resale value, ect...). Is there a simular preference for 2600s? Thanks.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=48812&t=48812
--
FAQ, list archives, a
For those who were able to attend, do you have any comments about the power
session. Any tidbits about the change in lab. In particular I am curious for
budget purposes if we can get away with just one layer 3 switch and one
layer 2 switch for mock up labs, OR will TWO layer 3 switches be highly
r
I don't think he needs to worry about reprise from Cisco if it is just for
study.
I'm interested in this too but from a tinkering "how does it work"
perspective. There are lots of confusing things about the pix software
install/upgrades/downgrades and then add in the activation keys and serial
nu
Isn't this the group that went bankrupt and took money with them from lots
of students for classes they paid for? There were lots of posts from angry
students here a bit ago, I wonder if their concerns have been address since
mentor is now back in business?
Message Posted at:
http://www.groupstu
If you have the 2nd edition of this lab guide by Stephen Hutnik and would
like to sell it, please contact me. Don't much mind if it is used, just
needs the CD and preferably few or erasable markings. I'm also interested in
some books for remote access and support.
I also want a Emutel Solo isdn s
This is a great post!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=29040&t=28911
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PR
This is what you want. Try to stay with M versions. I have 4700M with max
memory with fast ethernet module for sale soon if your interested.
http://www.cisco.com/warp/public/471/29.html
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=26460&t=26428
--
I got an email from them.
We don't have the MEM-C5K-16M-CUSTOM in stock. As a reference we list part
numbers and descriptions for easy reference. You can see our current
inventory at: www.networksurplus.ca.
I looked at the page again, and indeed it is just a reference page and not
in stock. Gues
Unfortunately not so in this case. There is documented problems with Sup I
with hardware 1.6 or earlier. The cheap Kingston and standard third party
options for Sup I don't work. I have found one place that sells the official
version quite cheap though just today on the net, but looking for 3rd pa
This comes up once every quarter or so. I need Cat5000 sup1 16mb ram, but I
have an older hardware revision Sup, so need this special MEM-C5K-16M-CUSTOM
part number apparently only available from Cisco. But, I remember reading in
this list a long time ago that just need " and your fine" except
I personally found Todd's CCNA book one of the better technical books I've
read, so also bought routing based on that. I have found it to be one of the
worst books I've read. His discussion on OSPF was completely confusing until
I read Doyle's book which was given to me and which you don't need fo
I've read here and on Cisco's website that the 2901 is Exactly a cat5 with
sup1 and a ws-5213, this is fine. BUT, I've got conflicting reports from
groupstudy posts whether a ws-5213 can do ISL trunking or not, thusly
everyone goes for ws-5213a. I can't seem to confirm this on Cisco's website.
Ca
I remember reading an older post here about a certain memory issue on older
supI cards with hardware revision 1.6 or older. Something about needing a
special HC or something dram upgrade. I found the article on CCO specifying
the problem. Does anyone know where I can get this special memory?
Than
I have a cat5 with with supI and various modules, 2 of them are fastethernet
modules, and WS-X5101 FDDI Module Multimode Fiber module. Also a telco 10mb
module as well.
I want to trade for an ISDN simulator, preferably teltone, and it must have
s/t interfaces.
Please email me for full details/pi
Well, I've got some progress. I can see the 4700 from another router using
show cdp nei. So probably the sub25pin is bad. It's brand new though. I'll
try to round up another somewhere.
I've got a different problem now. It's got three 2 ethernet port modules in
it. I wanted to confirm they all wor
I tried Sean's method, but still nothing. I looked at the CPU to re-seat it
like Frank suggested, but it doesn't have a release lever like a motherboard
CPU. I'm a bit weary to just pull at it, is this indeed what you do?
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2
Started March 23, 2001. This user group is for Cisco professionals or
learners living and working in Japan. There is a Cisco sponsored mailing
list that announces Tokyo meetings, but posting to it is restricted to Cisco
employees, so I created this group. All official Cisco sponsored user groups
m
17 matches
Mail list logo