If I pass the CCIE qualifier does that recertify my CCNP and CCNA?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=69943&t=69943
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report miscon
See inline below.
""Richard Campbell"" wrote in message
news:[EMAIL PROTECTED]
> Hi.. Group, I just successfully connect to home VPN client 3.X to my
> VPN 3000 concentrator in my HQ in NY, but now I want to use it to connect
> to my PIX 515 in my local branch as well. May I know
>
> 1)Whether I
I do not think he has revised one yet. I am looking for one too. I need to
pass the CCIE qualifier but I am also studying for the lab at the same time.
I have the Caslow book that has Appletalk and IPX in there. It is a good
book because there is a lot of useful information in there.
""Edwin R. Go
Sure it should work. Make sure you have PPP configured properly. Dont forget
to use the hostname of the router as the username on the Windows 2000
server. (Unless you like to specify a different username) Also make sure
your password are the same.
Cheers
""johnman johnman"" wrote in message
news:
Can someone at news.groupstudy.com enable the newnews comand on your news
server?
I have a bunch of cisco wannabes (i'm one of them) in my company that want
access to news.groupstudy.com. I am running Exchange 2000 I can't download
the newsgroup.
Thanks
Message Poste
Dear Fahim
Here
Define The traffic for policy routing:
access-list 150 tcp any any eq smtp
Then Make a Route-map policy
route-map permit
match ip address 150
set ip next-hop
Now assign it to some interface:
Interface configuration mode>ip policy ro
Split horizon is disabled by default on a Frame point-to-point
interfaces/sub-interfaces. There are a few books with huge errors saying
that it is "enabled" on point-to-point interfaces by default. . S0/0 is
Frame:
Router#sh ip int s0/0
Serial0/0 is down, line protocol is down
Internet addres
According to CCO:
The CiscoSecure Authentication Agent (CAA) sits on a remote SOHO site client
PC or a dial-in client PC served by a host network and provides a user GUI
for end users to access and manage their ISDN or dial-in connections to
their host network with CiscoSecure ACS for Windows NT
Sam,
Yes that back-to-back config works, yet you will not gain the knowledge and
skills that I think you are after.
It's true, you do need a third router to be the frame cloud, but that
doesn't buy you much either. The key is to make the frame switch, also a DTE
Hub router. However, you must hav
Dear All,
I want to employ an IDS solution in our network, I'm looking to purchase
Cisco IDS, please advise me about this product like performance, efficiency,
managment, easy of deploy and what other solution rather than cisco is
better if any ?
Regards,
-
ot;>news:[EMAIL PROTECTED]...
> Nope that isn't it s0 on 2511 is connected to a 1601 called gazdav to its
s0
> they both have ppp encaps. However 2511 s1 is connected to a 2501 and they
> both have encaps hdlc.
>
> Weirder still both interfaces show up up ...Hmmm
>
>
>
Hi there,
1) You misconfigured the IP on 2511's S1 interface.
2) 2511's S1 is missing an "enc ppp" command.
Regards,
Gary
""Gaz"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Should be a very simple one this don't know what I'm doing wrong. Why
can't
> I ping my own interf
Just for the record (and the archives), the solution for this is to call
Cisco. The solution involves a hidden command, and a special convoluted
password to get into said mode. After getting into that mode, another hidden
command will remove the password, allowing you to reboot the machine and get
What is the status of the main interface you are configuring this
Frame-relay subinterface on?
I have typically seen a "deleted" status for a PVC to mean that the PVC
within the frame-relay net you are connecting to is not built.
"Frank" <[EMAIL PROTECTED]> wrote in message
92s7rc$4f2$[E
Please provide a link or location to get something a little more powerful
than the Cisco config maker.
it is great but still limited.
Also trying to get some software to configure the switches. if you know of
any please advise.
thx
_
FAQ, list archives, and
Chuck (or anyone),
I read a reply to a post that joked about the "Avian protocol" with a RFC
and everything that went with it.
Could someone tell me waht that RFC was.
Thanks
-Joe-
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associate
I feel ti is easier than i expect
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Hey everyone,
Today I wrote Cisco Remote Access as my final exam for CCNP. Just want to
thank everyone in this group. The information passed around here is
invaluable! The archives of the list are also a great help!
The Remote Access exam wasn't as tough as the others, the questions were
word
I am in Scarborough and on the road to CCNP ! Which area r u in Toronto ?
"Russell Lusignan" <[EMAIL PROTECTED]> wrote in message
8h5rsk$82v$[EMAIL PROTECTED]">news:8h5rsk$82v$[EMAIL PROTECTED]...
> Anyone in the Toronto area interested in setting up a Study Group?
>
>
> __
19 matches
Mail list logo
