Re: 2 2501's as a frame relay switch - Once and For All

I worked through some Frame Relay scenarios last weekend and used tunnel interfaces to switch frames between three routers on an Ethernet segment (representing a core). I had several PVC's up but ran into problems when I tried the following: R1(s0 dte)(s0 dce)R2(tun 0)(tun 0)R3(s0

RE: 2 2501's as a frame relay switch - Once and For All

I've been saving this one for a while also. Originally I was going to write this off as another one of those questions. Then I got to wondering about the genesis of it. Did a bit of research. Interesting. http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/wan_

2 2501's as a frame relay switch - Once and For All

Searched the archives on Groupstudy and found varying answers on the follwoing config, for 2 2501's connecting through a tunnel to simulate a frame relay switch. Does it work yes or no? Thanks Cisco 2501 # 1 ! version 11.2 service udp-small-servers service tcp-small-servers ! hostname r1 ! !