I have a 2924xl-en switch that has been erased and reloaded, all the VTP and
VLAN settings are at default. When I assign an IP address to VLAN 2, the
command is taken but the interface will not come up, even after issuing a no
shutdown command. I am trying to put the management interface in a
di
You have to shutdown vlan 1 first. After that, VLAN 2 should come up fine.
Rob
"Wilson, Christian" @groupstudy.com on
08/22/2001 05:58:15 PM
Please respond to "Wilson, Christian"
Sent by: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
cc:
Subject: 2924xl-en man
If you're running a later version of the 2924XL software, do the
following:
conf t
int vlan2
ip add 000.111.222.333 255.255.255.0
management
This will make VLAN2 your management VLAN. In the older versions (like
11.x) I have no idea how to do this. The 'management' command is
unavailable so
Did you config the vtp domain , as well vlan two , under vlan database ?
Terada
At 17:58 22/08/2001 -0400, Wilson, Christian wrote:
>I have a 2924xl-en switch that has been erased and reloaded, all the VTP and
>VLAN settings are at default. When I assign an IP address to VLAN 2, the
>command i
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Wilson, Christian
Sent: Wednesday, August 22, 2001 5:58 PM
To: [EMAIL PROTECTED]
Subject: 2924xl-en management interface [7:16899]
I have a 2924xl-en switch that has been erased and reloaded, all the VTP
and
5 matches
Mail list logo