""BB"" [EMAIL PROTECTED] wrote in message
8pue1g$od0$[EMAIL PROTECTED]">news:8pue1g$od0$[EMAIL PROTECTED]...
Hi
i've setup two vlan in the switch.
but packet can't route from one vlan to other vlan...
how can i enable routing between vlan?
Assuming 2 VLANs numbers 1 and 2, make sure you
, September 15, 2000 7:20 PM
Subject: Re: 2948G L3, route between Vlan
You are use a router or a high end switch like 6509
with a RSM (route switch module) to do the routing for
you
--- BB [EMAIL PROTECTED] wrote:
Hi
i've setup two vlan in the switch.
but packet can't route from one vlan
Subject: Re: 2948G L3, route between Vlan
I know this is being picky but there's no such thing as an
RSM for the
6500.
Only the 5500. Essentially its the same thing but the 6500's
use MSFC
cards
instead.
I don't think it is picky. OTOH, it is an area of great
confusion for a lot
Hi
i've setup two vlan in the switch.
but packet can't route from one vlan to other vlan...
how can i enable routing between vlan?
thx
BB
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_
You are use a router or a high end switch like 6509
with a RSM (route switch module) to do the routing for
you
--- BB [EMAIL PROTECTED] wrote:
Hi
i've setup two vlan in the switch.
but packet can't route from one vlan to other
vlan...
how can i enable routing between vlan?
thx
BB
Here are two good links that will be helpful.
http://www.cisco.com/warp/public/473/25.html
http://www.cisco.com/warp/public/473/29.html
-Original Message-
From: BB [mailto:[EMAIL PROTECTED]]
Sent: Friday, September 15, 2000 8:16 PM
To: [EMAIL PROTECTED]
Subject: 2948G L3, route
6 matches
Mail list logo